• 한국세라믹학회지
• /
• 제56권6호
• /
• pp.526-533
• /
• 2019

Indialite/cordierite glass-ceramics demonstrate excellent microwave dielectric properties such as a low dielectric constant of 4.7 and an extremely high quality factor Qf of more than 200 × 10³ GHz when crystallized at 1300℃/20 h, which are essential criteria for application to 5G/6G mobile communication systems. The glass-ceramics applied to dielectric resonators, low-temperature co-fired ceramic (LTCC) substrates, and direct casting glass substrates are reviewed in this paper. The glass-ceramics are fabricated by the crystallization of glass with cordierite composition melted at 1550℃. The dielectric resonators are composed of crystallized glass pellets made from glass rods cast in a graphite mold. The LTCC substrates are made from indialite glass-ceramic powder crystallized at a low temperature of 1000℃/1 h, and the direct casting glass-ceramic substrates are composed of crystallized glass plates cast on a graphite plate. All these materials exhibit excellent microwave dielectric properties.

• 한국전자파학회논문지
• /
• 제27권9호
• /
• pp.872-875
• /
• 2016

본 논문에서는 W-대역에서 동작하는 턴스타일(Turnstile) 구조를 갖는 직교모드 편파기(Ortho-Mode Transducer: OMT)를 설계하고 제작하였다. 턴스타일 구조는 도파관의 대칭구조로 인하여 도파관 내에서 발생하는 불필요한 고차모드는 서로 상쇄되므로 광대역에서 높은 전달특성과 낮은 반사손실을 가지는 장점이 있으며, 공통포트에서 2개의 모드가 서로 직교하므로 이중편파 특성을 최대한 구현 가능하도록 해 준다. 제안한 직교모드 편파기는 레이다 탐색기에 적용 가능하며, 밀리미터파 대역인 W-대역(94 GHz)에서 동작한다. 또한, 제작한 결과, 동작 주파수 범위에서 평균적으로 -20 dB보다 낮은 반사손실 값을 가지며, 500 MHz 이상의 대역폭 특성을 보인다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.243-244
• /
• 2022

In this paper, experiments were conducted on signal amplification of polymer capsules for application to Ground Penetrating Radar so as to enable real-time monitoring of polymer capsules inside concrete using the Morphology Dependent Resonance phenomenon. A TEM CELL and a vector network analyzer were used to analyze the difference in resonance frequency depending on the material of the sphere and the presence or absence of fracture. In order to manufacture a capsule of a size that can be measured using millimeter waves used in GPR, we manufactured a capsule with a 3D printer and analyzed the effects of the presence or absence of coating and the size of the capsule on the resonance frequency. Resonant frequency or signal amplification is more affected by diameter than coating. The capsule showing the highest amplification is the resin-coated 50 mm diameter capsule with a 316-fold increase and the lowest capsule is the uncoated 10 mm diameter capsule with a signal amplification of 11.9 times. These results demonstrate the potential of GPR to measure the position and state of self-healing capsules, which are small-sized polymers, in real time using millimeter waves.

• 한국자기학회지
• /
• 제23권2호
• /
• pp.68-76
• /
• 2013

자기유도형 기반의 무선전력 전송 기술을 이용한 무선충전 기능이 최근 스마트폰 등에 채용되어 주요한 소비자 편의기능으로 자리잡고 있다. 무선전력전송 모듈은 무선전력 전송효율을 개선하고 휴대폰 주요 회로부에 대한 전자기장 간섭을 억제하기 위하여 전자기장 차폐 소재의 사용이 필수적이다. 본 논문에서는 무선전력 전송모듈용 전자기장 차폐 소재의 역할과 기술에 대해 소개하였다. 이와 함께 향후 확산될 중급 전력(mid-power)과 대전력(high-power)영역의 무선전력 전송 응용분야에서 대응 가능한 차폐 소재의 개발 방향을 정리하였다.

• 대한전자공학회논문지SD
• /
• 제38권11호
• /
• pp.771-780
• /
• 2001

ULSI급 CMOS 소자를 개발, 제작하고 또한 그것의 전기적 특성을 정확히 분석하기 위해서는 공정 및 소자 시뮬레이터의 사용이 필수적이다. 대면적 몬테 카를로 시뮬레이션 결과가 다차원 소자 시뮬레이터의 입력으로 사용되려면 과도한 입자수의 증가로 비효율성을 띄게 된다. 본 논문에서는 이러한 문제를 해결하기 위해 3차원 몬테 카를로 이온 주입 시뮬레이터인 TRICSI 코드를 이용하여 물리적으로 타당하며 또한 효율적으로 시뮬레이션 입자 수를 증가시켜 대면적 이온 주입시의 3차원 통계 분포의 잡음 영역을 최소화하는 방법을 제안하였다. 후속 공정인 열확산 공정이나 RTA(급속 열처리) 공정의 확산 방정식을 푸는 경우 발산을 막기 위해 몬테 카를로 시뮬레이션 결과의 통계 분포에 대한 후처리 과정으로 3차원 셀을 이용한 보간 알고리듬을 적용하였다. 시뮬레이션 수행 결과 가상 궤적 발생법(split-trajectory method)만을 사용한 것에 비해 계산 시간은 2배로 늘이지 않는 범위에서 10배 이상의 이온 입자 생성 분포를 얻을 수 있다.

• Journal of information and communication convergence engineering
• /
• 제5권2호
• /
• pp.121-125
• /
• 2007

In this paper, a planar active retrodirective four-element array with subharmonic phase conjugation mixers based on anti-parallel diode pairs (APDPs) is designed, and its application in the auto-tracking duplex communication link is presented. As compared to previous phase conjugation mixers using twice RF frequency for LO frequency, the proposed conjugation mixers need only half RF frequency so that it can be easily applied for millimeter-wave applications. The proposed architecture, which conventionally performs the function of the transmission of an incident signal back in the direction of its source, is modified in order to include a receive function. Experimental verification of these architectures is performed at 1GHz and the results from the prototypes are compared with a theoretical model.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1166-1174
• /
• 2002

This paper presents the implementation and vehicle tests of a vehicle longitudinal control scheme for Stop and Go cruise control. The control scheme consists of a vehicle-to-vehicle distance control algorithm and throttle/brake control algorithm for acceleration tracking. The desired acceleration of a vehicle for vehicle-to-vehicle distance control has been designed using Linear Quadratic optimal control theory. Performance of the control algorithm has been investigated via vehicle tests. A millimeter wave radar sensor has been used for distance measurement. A stepper motor and an electronic vacuum booster have been used for throttle/brake actuators, respectively. It has been shown that the proposed control algorithm can provide satisfactory performance.

• Journal of Information Processing Systems
• /
• 제16권4호
• /
• pp.896-914
• /
• 2020

With the rapid growth of network traffic, a large number of connected devices, and higher application services, the traditional network is facing several challenges. In addition to improving the current network architecture and hardware specifications, effective resource management means the development trend of 5G. Although many existing potential technologies have been proposed to solve the some of 5G challenges, such as multiple-input multiple-output (MIMO), software-defined networking (SDN), network functions virtualization (NFV), edge computing, millimeter-wave, etc., research studies in 5G continue to enrich its function and move toward B5G mobile networks. In this paper, focusing on the resource allocation issues of 5G core networks and radio access networks, we address the latest technological developments and discuss the current challenges for resource management in 5G.

• Transactions on Electrical and Electronic Materials
• /
• 제16권3호
• /
• pp.142-145
• /
• 2015

In this work, open stubs were fabricated on a polyether sulfone (PES) substrate, and their basic radio frequency (RF) characteristics were investigated for application to RF matching components of a flexible monolithic microwave integrated circuit (MMIC). According to the results, an open stub employing coplanar waveguide (OSCPW) on PES exhibited much lower loss than that on silicon substrate. The OSCPW with a length of $500{\mu}m$ on PES showed capacitance values of 0.031 ~ 0.044 pF from 0.5 to 50 GHz. For application to a relatively high-value capacitive matching, an open stub employing a fishbone-type transmission line (OSFTTL) was fabricated on PES, and its characteristics were investigated. The OSFTTL showed much higher capacitance values than the OSCPW due to the high effective permittivity value. Specifically, the OSFTTL on PES showed capacitance values of 0.066 ~ 0.24 pF from 0.5 to 50 GHz, which are higher than those for the open stub on silicon substrate. The above results indicate that the OSCPW and OSFTTL on PES can be effectively used for application to low/high-value capacitive matching components on microwave and millimeter wave flexible MMIC. To the best of the authors' knowledge, this work is the first report of the investigation of RF capacitive matching components on PES substrate.

• Journal of electromagnetic engineering and science
• /
• 제17권3호
• /
• pp.138-146
• /
• 2017

A phase-locked dielectric resonator oscillator (PLDRO) is an essential component of millimeter-wave communication, in which phase noise is critical for satisfactory performance. The general structure of a PLDRO typically includes a dual loop of digital phase-locked loop (PLL) and analog PLL. A dual-loop PLDRO structure is generally used. The digital PLL generates an internal voltage controlled crystal oscillator (VCXO) frequency locked to an external reference frequency, and the analog PLL loop generates a DRO frequency locked to an internal VCXO frequency. A dual loop is used to ease the phase-locked frequency by using an internal VCXO. However, some of the output frequencies in each PLL structure worsen the phase noise because of the N divider ratio increase in the digital phase-locked loop integrated circuit. This study examines the design aspects of an interconnected PLL structure. In the proposed structure, the voltage tuning; which uses a varactor diode for the phase tracking of VCXO to match with the external reference) port of the VCXO in the digital PLL is controlled by one output port of the frequency divider in the analog PLL. We compare the proposed scheme with a typical PLDRO in terms of phase noise to show that the proposed structure has no performance degradation.