• Korean Journal of Materials Research
• /
• v.7 no.9
• /
• pp.723-727
• /
• 1997

Nd치환이 Ag의 용융점 이하인 94$0^{\circ}C$에서 소결한 $Bi_{1-x}$$Nd_{x}$N$bO_{4}$세라믹스의 소결거동과 마이크로파 유전특성에 미치는 영향을 연구하였다. Nd치환량(x)이 증가함에 따라 사방점에서 삼사정으로 변하는 양이 증가하였고 결정립의 크기, 겉보기밀도, 유전상수는 감소하였다. Q$xf_{0}$값은 Nd 치환량이 0.025mole 이하의 경우 큰 변화가 없으나, 그 이상에서는 증가하여 0.1mol일 때 최고값을 보이고 다시 급격히 감소하였다. TCF값은 Nd치환량이 증가할수록(+)방향으로 증가하였다. 가장 우수한 마이크로파 유전특성은 Nd 치환량이 0.025mole일 때 얻어졌으며, 이때 유전상수는 43.7, Qxf/ sub 0/값은 11,046GHz, TCF값은 -1.82ppm/$^{\circ}C$이었다.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.532-533
• /
• 2006

In this research work attempts were made to study the bonding of thermoplastics with adhesives using solar energy. In order to study the curing behaviour necessary experiments were conducted under varying conditions of temperature, exposure time and power. The cured samples were then studied under the optical microscope before subjecting to tensile testing in order to study their mechanical properties. The fracture surfaces were further studied under the Scanning Electron Microscopy in order to study the microstructural changes that are taken place during curing. From the present study it is evident that curing under higher solar energy temperature, generally improves bond strength and quality of the adhesive joints when compared to other modes of curing process expect the microwave curing process.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.325-334
• /
• 1987

Microwave integrated circuit phase shifters have undergone remarkable development to satisfy the fast and precise phase control requirements for phased array antennas. It is shown how relection type phase shift circuits using PIN diode can be analyzed and implemented so as to derve design equations for any phase shift. The reflection properties are achieved by the use of an impedance transforming two-port network and the virtual matching impedance method. Experimental and theoretical performance of 2-bit hybrid phase shifter designed by this method are found to be in good agreement for each bit.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1542-1545
• /
• 2002

Experimental works were performed to implement the hetero-epitaxial growth of diamond films on the (100)- and (111)-oriented Si substrates. The deposition process used to prepare diamond films consisted of a bias-enhanced nucleation(BEN) step, accompanied with a growth step using a microwave plasma CVD system. The highly oriented diamond films were deposited under the growth condition of relatively low methane concentrations and high temperatures. Material properties and surface morphologies of deposited diamond films were improved by the addition of carburization step into the deposition process.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.10
• /
• pp.1061-1067
• /
• 2004

In this study, ferroelectric (Ba,Sr)TiO$_3$ and high temperature superconductor YBCO thin films were fabricated by PLD (Pulsed Laser Deposition) method and tuneable bandstop filters were implemented with two different IDC(Interdigital Capacitance) gap patterns, 20${\mu}{\textrm}{m}$ and 30${\mu}{\textrm}{m}$ using these two thin film layers. The resonant frequency was changed by DC bias voltage. By comparing measured results with simulation, the dielectric properties of ferroelectric thin film have been extracted. The permittivity was 820 ～ 900 at 30 K and had an acceptable error range but the loss tangent had a great difference, 0.018 in 30${\mu}{\textrm}{m}$ IDC gap pattern and 0.037 in 20 ${\mu}{\textrm}{m}$.

• Journal of the Korean Society of Food Culture
• /
• v.20 no.2
• /
• pp.253-260
• /
• 2005

This study was conducted to investigate performance of methods for cooking and thawing frozen cooked rice to retard retro-gradation of cooked rice. For this research, That was executed rice's physicochemical and sensory characteristics test through the way of boiling rice or thawing, and found out best way for retro-gradation and taste. This study showed the rice cooked by pressure rice pot has less dehydration during freezing and thawing, and thawed rice by micro wave has less dehydration. Repetition of freezing and thawing resulted increasing of hardness and chewiness, and decreasing of adhesiveness and cohesiveness. The rice cooked by convotherm oven or pressure rice pot has less increased hardness while freezing and thawing. Adhesiveness was superior when rice was cooked by pressure rice pot. The rice thawed by microwave had more hardness than thawed in room temperature.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.07a
• /
• pp.424-431
• /
• 2002

마이크로파 주파수는 일반적으로 1㎓-30㎓ 정도로서 주파수가 매우 높기 때문에 도체뿐만 아니라 절연체와 공기 중에서도 전류가 흐르는 성질을 갖는다. 자유공간에서의 마이크로파를 전자파라고도 하며 그 속도는 빛의 속도와 동일하며 자유공간에서 1cm-30cm 파장 범위를 가지므로 센티파라고도 한다. 전자방사(electromagnetic radiation)은 공간을 통하여 시간에 따라 변하는 전자계(electric and magnetic field)에 의한 에너지의 전파(propagation)이며 파동이론과 (wave theory)와 미립자이론(corpuscular theory)에 의해 해석될 수 있다. 전자파 이론(electromagnetic wave theory)의 기초는 1864년 Maxwell이 전자기 현상에 관하여 지배방정식을 수립함으로써 정립되었으며 1888년 Hertz에 의해 마이크로파의 존재가 실험적으로 증명되었다. 이후 마이크로파 기술은 2 차 세계대전을 거치면서 크게 발전하였으며 초기의 레이더 및 통신 등과 같은 군용 기술에서 마이크로파 건조 및 센싱과 같은 산업응용 기술로 발전하게 되었다. 특히 마이크로파 센서기술 및 가열기술은 농업 및 식품분야에 응용되어 마이크로파 응용제품을 선보이게 되었다. (중략)

• Korean Journal of Materials Research
• /
• v.6 no.12
• /
• pp.1186-1191
• /
• 1996

CuO의 첨가가 BiNbO4 세라믹스의 마이크로파 유전특성과 소결거동에 미치는 영향에 대하여 연구하였다. CuO의 첨가량이 증가함에 따라 액상의 생성에 의해 소결성이 증가하여 시편의 밀도는 증가하며 유전상수는 소결온도가 증가함에 따라 증가하는 경향을 보였다. Qxfo값은 CuO 첨가량이 0.065wt%이고 소결온도가 94$0^{\circ}C$일 때 최대값을 나타내며 그 이상 CuO 첨가량을 증가하였다. 소결온도 92$0^{\circ}C$-96$0^{\circ}C$, 소결시간 2시간일 때의 고주파 유전특성으로는 유전상수가 43.6, Qxfo값이 13,200 이상, $\tau$f =-14.36ppm/$^{\circ}C$을 얻었다.

• Journal of Magnetics
• /
• v.16 no.2
• /
• pp.92-96
• /
• 2011

This study investigated theoretically the properties of the spin transfer torque acting on a ferromagnet in a ferromagnet-normal metal-antiferromagnet junction. Earlier work showed that the angular dependence of the spin transfer torque can be a wavy-type if the junction satisfies a special symmetry. This paper reports a simple model analysis that allows a derivation of the wavy angular dependence without taking advantage of the symmetry. This result suggests that the wavy angular dependence can appear even when the symmetry is broken. As an illustration, the angular dependence was calculated as a function of the degree of the compensation at the normal metal-antiferromagnet interface. The implications of the result for the current-induced magnetization precession are discussed.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.981-982
• /
• 2006

In this study, the synthesis and semiconducting properties of cation and defect-doped KTaO3 film is reported. KTaO3is an important material for optoelectronic and tunable microwave applications. It is an incipient ferroelectric with a cubic structure that becomes ferroelectric when doped with Nb. the films were grown on (001) MgO single crystal substrates using pulsed-laser deposition. Semiconducting behavior is achieved by inducing oxygen vacancies in the KTaO3 lattice via growth in a hydrogen atmosphere. The resistivity of semiconducting KTaO3:Ca films was as low as 10cm, and n-type semiconducting behavior was indicated. Hall mobility and carrier concentration were 0.27 cm2/Vs and 3.21018cm-3.