• 대한두개안면성형외과학회지
• /
• 제24권2호
• /
• pp.87-90
• /
• 2023

Endotracheal intubation is often necessary in the course of animal experiments, especially in craniofacial surgery. However, endotracheal intubation can be a major burden in this context. The authors performed simple and cost-saving method using a 200 µL yellow micropipette tip, and the success of this method was demonstrated by X-ray and autopsy. We used a total of 30 rats. After the rats were fixed with a plaster, the trachea and vocal cords were visualized with the tongue pulled back. Under direct visualization of the vocal cords, a curving micropipette tip was advanced into the trachea. This method can be learned quickly and applied successfully by general experimenters. We successfully intubated all 30 rats without any complications. The success rate of micropipette tip intubation was 100%. This procedure was performed by one experimenter within 2 to 3 minutes after induction of anesthesia. We demonstrated its superiority by X-ray and autopsy. Herein, we describe endotracheal intubation of rats using micropipette tips. To the best of our knowledge, this method is novel and represents the simplest and most efficient means of intubation in rats, providing an alternative to conventional endotracheal intubation.

• 센서학회지
• /
• 제22권5호
• /
• pp.309-314
• /
• 2013

Glass micropipettes are widely used for drug injection in neurological studies. To enable these devices to monitor neural activity simultaneously with drug injection, an electrode such as Ag/AgCl must be located near or inserted into the glass micropipette to detect electrical signals in vivo. Here, we report carbon-nanotube-modified glass micropipettes (CNGs), which have excellent electrochemical properties such as low impedance and large electrochemical surface area suited for neural recording. In addition, using a standard pressure pump, CNGs can deliver drugs to the target region without bending. Because they are based on standard glass micropipettes, CNGs can readily be applied to traditional equipment, creating opportunities to monitor precisely the drug-injected area.

• 한국가축번식학회지
• /
• 제19권4호
• /
• pp.265-270
• /
• 1996

This study was carried out to investigate on the survival rates and in vitro developmental rates of bisected bovine embryos by micromanipulator and micropipette. Bisected embryos were cultured for 1∼5 days in 20% FCS＋TCM-199 medium. Survival rate and in vitro developmental rate were defined as development rate on in vitro culture or FDA-test. The results are summarized as follows ; 1. The survival rates of intact or free zona pellucida of bisected embryos were 30.3 and 25.0%, respectively. And the survival rates of bisected embryos by micromanipulator and micropipette were 33.3 and 26.7%, respectively. The survival rate of bisected embryos was significantly lower than that of non-bisection embryos(65.0%). 2. The survival rates of bisection embryos in cultured for 12, 24, 48, 72 hrs with 20% FCS＋TCM-199 medium were 40.0, 30.0, 23.3 and 13.3%, respectively. 3. The in vitro developmental rates of intact of free zona pellucida of bisected embryos by micromainipulator and micropipettes were 33.3 and 26.7%, respectively. The survival rate of bisection embryos was significantly lower than that of non-bisection embryos(45.0%).

• 한국가축번식학회지
• /
• 제21권3호
• /
• pp.275-280
• /
• 1997

This study was carried out to investigate on the survival and in vitro developmental rates of bisected bovine embryos by microblade, micropipette and pronase methods. Bisected embryos cultured for 1∼7 days in TCM-199 media with 10 FCS＋hormones. Survival and in vitro developmental rates was defined on in vitro culture or FDA-test. The results are summarized as follows ; 1. The survival and in vitro developmental rates of bisected bovine embryos by microblade, micropipette and pronase methods were 22.2, 16.7, 15.0% and 22.2, 23.3, 18.8%, respectively. In vitro developmental rate of bisected bovine embryos was significantly lower than that of non-bisection embryos(27.8% and 25.0%). 2. In vitro developmental rates of bovine embryos bisected for 1, 2, 4, 8, 16 cells stages during in vitro culture in 10% FCS＋TCM-199 media were 25.0, 20.0, 20.0, 15.0 and 6.7%, respectively. 3. In vitro developmental rates of intact and free-zona pellucida of bisected demi-embryos during in vitro culture in 10% FCS＋TCM-199 media were 25.6, 16.7%, respectively. 4. In vitro developmental rates of biopsied embryos and biopsied blastomeres during in vitro culture in 10% FCS＋TCM-199 media were 20.0, 11.1%, respectively.

• 한국가축번식학회지
• /
• 제23권4호
• /
• pp.313-321
• /
• 1999

본 연구는 체외생산된 배반포기배의 vitrification 을 위한 용기로서 glass micropipette(GMP)을 이용할 수 있는지, GMP 와 OPS 로 동결융해 후 생존율의 비교 및 GMP vitrification 후 hatching 율의 향상을 위하여 실시하였다. GMP vessel은 열전도율과 수정란을 포함하는 적은 질량 때문에 OPS 보다 동결 및 융해속도를 높일 수 있다. 3개의 체외수정란을 vitrification 용액에 노출시키고 OPS 또는 GMP vessel에 loading 시킨 후 액체질소에 침적하는데까지 20~25초 이내에 실시하였다. 동결ㆍ융해한 배반포기배는 0.25와 15 M sucrose solution 및 TCM 1999에 각각 5분씩 차례로 희석한 후 10% FCS가 첨가된 TCM 199에 24시간동안 배양하였다. OPS(75.9%)와 GMP(80.0%) 방법간의 re-expanding 율은 유의적 (P＜0.05)인 차이가 없었다. OPS(34.1%)와 GMP(37.5%) 방법에서 hatching 율은 intact group(54.3%) 보다도 유의적 (P＜0.05)으로 낮았다. 비록 GMP straw 당 3개 이하의 blastocysts 를 loading 하였더라도 narrow portion(83.3%) 보다도 wide portion(S6.7%)에서 vitrified 되었다면 re-expanding 율이 유의적 (P＜0.05)으로 낮았다. 비록 30초 처리군과 무처리군 간에는 유의적인 차이가 없었지만 0.05% pronase 용액에 30, 60 및 90초간 처리군 (45.9, 54.7 및 57.5%)의 hatching 율은 무처리구 (35.0%) 보다 유의적 (P＜0.05)으로 높았다. 이러한 결과들은 OPS와 GMP vitrification vessel은 체외생산된 배반포기배의 높은 생존율을 얻을 수 있다. 그러나 GMP vessel은 L$N_2$침적 후 vessel의 floating을 방지하기 위한 또 다른 cap 이 필요하지 않다는 유리한 점을 가지고 있다. 수정란의 loading 위치, 즉 narrow 또는 wide portion에 따라 소 체외 생산된 배반포기배의 생존력에 제한적인 요인으로 고려된다. 0.5% pronase 용액에 60 또는 90초간의 노출은 융해후 hatching 율을 향상시킬 수 있었다.

• 한국수정란이식학회:학술대회논문집
• /
• 한국수정란이식학회 2002년도 국제심포지엄
• /
• pp.83-83
• /
• 2002

The purpose of this study was to investigate the warming temperature and exposed time on the post-thaw survival rate and viability of bovine blastocyst cryopreserved by GMP vitrification. Groups of three bovine IVP blastocysts were sequentially placed into vitrification solution before being loaded into the GMP straws and immersed into LN$_2$within 20 to 25 sec. The warming rate was increased 2 times of warming temperature for improvement of post-thaw survival rates. The frozen embryos were warmed either at 35 or 70$^{\circ}C$ for 1 or 2 sec and then diluted in sucrose solution. Post-thaw blastocysts were serially washed in 0.25 and 0.15 M sucrose in holding medium (HM: TCM199 supplemented with 10% FCS) and TCM-199 for each 5 min, respectively, and then cultured in TCM199 for 24 h. The rate of re-expanded blastocyst was significantly different fer 35 and 70$^{\circ}C$ warming temporature (76.4 vs. 89.3%; P<0.05). The rate of re-expanded blastocyst at 70$^{\circ}C$ for 1 sec was significantly higher than that for 2 sec (91.1 vs. 70.9%; P<0.05). The number of nuclei counted were significantly different among control, 35 and 70$^{\circ}C$ (121${\pm}$8.5 vs. 104${\pm}$11.7 vs. 114${\pm}$10.3; P<0.05). These results indicated that the increasing of warming rate can provide high survival rates of bovine IVP blastocysts. Especially, the best viability of post-thaw blastocyst could be thaw at 70$^{\circ}C$ for 1 sec. The warming temperature and exposed time far warming was considered to be limiting factors to the viability of bovine IVP embryos. he purpose of this study was to investigate the warming temperature and expose.

• 한국가축번식학회지
• /
• 제19권2호
• /
• pp.129-134
• /
• 1995

This study was carried out to investigate on the survival rate and in vitro developmental rate of bisected porcine embryos and immature oocytes by manipulator and micropipette. Bisected embryos and immature oocytes cultured for 1∼5 days in TCM 199 medium with 20% FCS. Survival rate was defined as development rate on in vitro culture or FDA-test. The results are summarized as follows ; 1. The survival rate of bisected porcine embryos and oocytes were 26.1%, 22.7%, respectively. The survival rate of bisected embryos and oocytes was significantly lower than that of non-bisection embryos(62.5%). 2. The survival rate of bisected porcine embryos in cultured for 12, 24, 48, 72 hrs with 20% FCS＋TCM-199 medium were 26.9%, 19.2%, 19.2% and 11.5%, respectively. 3. The in-vitro developmental rate with and without zona pellucida of bisected porcine embryos by micromanipulator were 30.8%, 25.0%, respectively.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2002년도 춘계학술발표대회 발표논문초록집
• /
• pp.36-36
• /
• 2002

This study was designed to examine the ability of the bovine (MII) oocytes cytoplasm to support several mitotic cell cycles under the direction of differentiated somatic cell nuclei of bovine, human, porcine and mouse. Bovine GV oocytes were matured in TCM-l99 supplemented with l0% FBS. At 22 h after IVM, denuded recipient oocytes were stained with 5 ㎍/㎖ Hoechst and their 1 st polar body (PB) and MII plate were removed by enucleation micropipette under. (omitted)

• 비파괴검사학회지
• /
• 제32권3호
• /
• pp.263-268
• /
• 2012

It is important to know the mechanism of cell membrane fluctuation because it can be readout for the nanomechanical interaction between cytoskeleton and plasma membrane. Traditional techniques, however, have drawbacks such as probe contact with the cell surface, complicate analysis, and limit spatial and temporal resolution. In this study, we developed a new system for non-contact measurement of nano-scale localized-cell surface dynamics using modified-scanning ion-conductance microscopy. With 2 nm resolution, we determined that endothelial cells have local membrane fluctuations of ~20 nm, actin depolymerization causes increase in fluctuation amplitude, and ATP depletion abolishes all membrane fluctuations.

• 한국가시화정보학회지
• /
• 제9권2호
• /
• pp.21-26
• /
• 2011

Hydrodynamic focusing technique to generate focused flow has been used for flow cytometry in microfluidic devices. However, devices with circular capillary tubes made of glass are not suitable for flow visualization or optical signal detection because the rays of light are distorted at the curved interface. We devised a new acrylic chamber assembled with a pulled micropipette and a rectangular microchannel made of glass. This new channel geometry enabled us to visualize the three-dimensional (3D) flow characteristics with confocal imaging technique. We analyzed the 3D hydrodynamic focusing in a circular capillary tube and a rectangular microchannel over a practical range of flow rates, viscosities and pressure drops.