• 제목/요약/키워드: Microbial Fuel Cell

검색결과 131건 처리시간 0.023초

고분자 전해질 분리막 기반 미생물 연료전지의 최근 연구동향 (Current Research Trends in Microbial Fuel Cell Based on Polymer Electrolyte Membranes)

  • 최태환;김효원;박호범
    • 멤브레인
    • /
    • 제20권3호
    • /
    • pp.173-184
    • /
    • 2010
  • 미생물 연료전지는 신재생에너지로서 미생물이 유기물을 분해하는 신진대사 과정을 통해서 전기에너지를 생성한다. 각종 유기물이 풍부한 폐수를 이용하여 전력을 생산할 뿐 아니라, 슬러지 발생량도 감축할 수 있는 미래 전도유망한 친환경에너지이다. 하지만 이를 상용화하기 위해서는 전지 내부에서 발생하는 모든 저항요소들을 감소시켜 더 높은 전력밀도를 생산해야 될 필요가 있다. 예를 들어 신진대사가 활발한 미생물의 종류, 미생물과 전극의 효과적인 전자전달 과정, 전극의 재료 및 형태 등의 개선을 통하여 전력밀도를 높일 수 있다. 특히, 고분자 전해질 분리막의 성능개선은 산화, 환원전극조를 완벽히 분리할 뿐만 아니라, 환원전극으로의 수소이온 전도도를 높여 내부저항을 줄일 수 있는 핵심 요소이다.

미생물연료전자를 이용한 유기산으로부터 전기생산 특성 (Characteristics of Electricity Production from Volatile Fatty Acids Using a Microbial Fuel Cell)

  • 노정빈;황용우;배재호;문진영
    • 상하수도학회지
    • /
    • 제20권2호
    • /
    • pp.225-234
    • /
    • 2006
  • Characteristics of electricity production from major fermentation products (acetate, propionate and butyrate) were evaluated in a microbial fuel cell (MFC). For each substrate, batch and continuous experiments were performed. The batch test result indicated that coulombic efficiency depended on the resistance connected in MFC circuit. With acetate, coulombic efficiency were 87% at $20{\Omega}$, but decreaced to 45% at$220{\Omega}$. In continuous tests, maximum power densities obtained was 220 Q with acetate. The maximum power densities of butyrate, acetate and propionate were 6.8, 6.1, and $5.2mW/m^2$, respectively. Propionate and butyrate were converted into acetate producing high currents. $H_2$ produced during butyrate and propionate probably used to produce electricity. In conclusion, butyrate conversion into acetate was faster than that of propionate with higher electricity production. If the production of propionate is inhibited during fermentation, anaerobically fermented liguor may be effectively applied for MFC.

Characterization of Microbial Fuel Cells Enriched Using Cr(VI)-Containing Sludge

  • Ryu, Eun-Yeon;Kim, Mi-A;Lee, Sang-Joon
    • Journal of Microbiology and Biotechnology
    • /
    • 제21권2호
    • /
    • pp.187-191
    • /
    • 2011
  • Microbial fuel cells (MFCs) were successfully enriched using sludge contaminated with Cr(VI) and their characteristics were investigated. After enrichment, the charge of the final 10 peaks was 0.51 C ${\pm}$ 1.16%, and the anodic electrode was found to be covered with a biofilm. The enriched MFCs removed 93% of 5 mg/l Cr(VI) and 61% of 25 mg/l Cr(VI). 16S rDNA DGGE profiles from the anodic electrode indicated that ${\beta}$-Proteobacteria, Actinobacteria, and Acinetobacter sp. dominated. This study is the first to report that electrochemically active and Cr(VI)-reducing bacteria could be enriched in the anode compartment of MFCs using Cr(VI)-containing sludge and demonstrates the Cr(VI) removal capability of such MFCs.

Enhanced Current Production by Electroactive Biofilm of Sulfate-Reducing Bacteria in the Microbial Fuel Cell

  • Eaktasang, Numfon;Kang, Christina S.;Ryu, Song Jung;Suma, Yanasinee;Kim, Han S.
    • Environmental Engineering Research
    • /
    • 제18권4호
    • /
    • pp.277-281
    • /
    • 2013
  • A dual-chamber microbial fuel cell (MFC) inoculated with Desulfovibrio desulfuricans and supplemented with lactate as an organic fuel was employed in this study. Biofilm formed on the anodic electrode was examined by scanning electron microscopy, revealing that the amount of biofilm was increased with repeated cycles of MFC operation. The maximum current production was notably increased from the first cycle ($1,310.0{\pm}22.3mA/m^2$) to the final cycle ($1,539.4{\pm}25.8mA/m^2$) of MFC run. Coulombic efficiency was also increased from $89.4%{\pm}0.2%$ to $98.9%{\pm}0.5%$. We suggest that the current production efficiency was related to the biomass of biofilm formed on the electrode, which was also increased as the MFC run was repeated. It was also found that D. desulfuricans, which colonized on the electrode, produced filaments or nano-pili. Nano-pili were effective for the attachment of cells on the electrode. In addition, the nano-pili provided a cell-to-cell link and stimulated the development of thicker electroactive biofilm, and therefore, they facilitated electron transfer to the anode. Conclusively, the biofilm of D. desulfuricans enhanced the current production in the MFC as a result of effective attachment of cells and electron transfer from the cell network to the electrode.

미생물 연료전지 영속발전 지표개발 (Sustainability Indices (=Green Star) for Microbial Fuel Cell)

  • 송하근;구자공
    • 유기물자원화
    • /
    • 제23권2호
    • /
    • pp.47-52
    • /
    • 2015
  • 미생물연료전지(MFC)는 미생물의 촉매 반응을 통해 다양한 유기물로부터 전기를 얻을 수 있는 장치이다. MFC는 여러 분야로 응용이 가능하며 현재 생산되는 전력이 낮기 때문에 상용화가 되기 위해서는 미생물연료전지의 성능을 증진시키는 연구가 필요하다. 현재 연료전지에 비해 MFC의 성능이 낮은 이유로는 미생물 분해시간이 오래 걸린다는 점과 음극에서 산소 환원의 과정에서 과전압이 상당히 높기 때문이다. MFC는 전력량이 미흡하지만 많은 요인들을 고려하면 신재생에너지로써 현재 일반적으로 사용 하고 있는 이온교환막인 Nafion 117 대비 전력밀도가 PP(Poly Propylene) 80에서 약 11배 높은 저비용의 미세 다공성 부직포로 변경하여 하 폐수를 처리하는데 드는 비용을 절감시키면서 전력을 발생시키는 친환경적인 에너지원이 될 수 있을 것이다. 모든 폐기물은 미생물의 먹이로 작용할 수 있다는 점에서 미생물 연료 전지의 지속가능성은 무한하다. 본 논문에서는 미생물연료전지의 구성, 운전 매개변수의 최적화 및 성능에 대한 최근 연구를 고찰하고 SSaM-GG(Smart, Shared, and Mutual-Green Growth) 또는 GG-SSaM =(Green Growth - Smart, Shared, and Mutual)라는 개념을 통하여 MFC의 지속가능한 발전에 대한 중간지표들을 개발하고자하는 바이다.

생물환원전극 미생물연료전지에서 외부저항 및 유입부하에 따른 유기물 및 질소 제거와 전기생산에 미치는 영향 (Effect of the Organic and Nitrogen Removal and Electricity Production on Changing the External Resistor and the Inflow Loading in the Biocathode Microbial Fuel Cell)

  • 김지연;김병군;김홍석;윤주환
    • 한국물환경학회지
    • /
    • 제31권5호
    • /
    • pp.556-562
    • /
    • 2015
  • In order to remove the organic substances and the nitrate-nitrogen contained in wastewater, some researchers have studied the simultaneous removal of organics and nitrogen by using different biocathode microbial fuel cells (MFCs). The operating conditions for removing the contaminants in the MFCs are the external resistances, HRTs, the concentration of the influent wastewater, and other factors. This study aimed to determine the effect of the external resistors and organic loading rates, from the changing HRT, on the removal of the organics and nitrogen and on the production of electric power using the Denitrification Biocathode - Microbial Fuel Cell (DNB-MFC). As regards the results of the study, the removal efficiencies of $SCOD_{Cr}$ did not show any difference, but the nitrate-nitrogen removal efficiencies were increased by decreasing the external resistance. The maximum denitrification rate achieved was $129.2{\pm}13.54g\;NO_3{^-}-N/m^3/d$ in the external resistance $1{\Omega}$, and the maximum power density was $3,279mW/m^3$ in $10{\Omega}$. When the DNB-MFC was operated with increasing influent organic and nitrate loading by reducing the HRTs, the $NO_3{^-}-N$ removal efficiencies were increased linearly, and the maximum nitrate removal rate was $1,586g\;NO^3{^-}-N/m^3/d$ at HRT 0.6 h.

Enhancing Electricity Generation Using a Laccase-Based Microbial Fuel Cell with Yeast Galactomyces reessii on the Cathode

  • Chaijak, Pimprapa;Sukkasem, Chontisa;Lertworapreecha, Monthon;Boonsawang, Piyarat;Wijasika, Sutthida;Sato, Chikashi
    • Journal of Microbiology and Biotechnology
    • /
    • 제28권8호
    • /
    • pp.1360-1366
    • /
    • 2018
  • The fungi associated with termites secrete enzymes such as laccase (multi-copper oxidase) that can degrade extracellular wood matrix. Laccase uses molecular oxygen as an electron acceptor to catalyze the degradation of organic compounds. Owing to its ability to transfer electrons from the cathodic electrode to molecular oxygen, laccase has the potential to be a biocatalyst on the surface of the cathodic electrode of a microbial fuel cell (MFC). In this study, a two-chamber MFC using the laccase-producing fungus Galactomyces reessii was investigated. The fungus cultured on coconut coir was placed in the cathode chamber, while an anaerobic microbial community was maintained in the anode chamber fed by industrial rubber wastewater and supplemented by sulfate and a pH buffer. The laccase-based biocathode MFC (lbMFC) produced the maximum open circuit voltage of 250 mV, output voltage of 145 mV (with a $1,000{\Omega}$ resistor), power density of $59mW/m^2$, and current density of $278mA/m^2$, and a 70% increase in half-cell potential. This study demonstrated the capability of laccase-producing yeast Galactomyces reessii as a biocatalyst on the cathode of the two-chamber lbMFC.

미생물 연료 전지 적용을 위한 양성자 교환막에 대한 검토 (Review on Proton Exchange Membranes for Microbial Fuel Cell Application)

  • 김지민;라즈쿠마 파텔
    • 멤브레인
    • /
    • 제30권4호
    • /
    • pp.213-227
    • /
    • 2020
  • 재생 불가능한 에너지 자원이 수년에 걸쳐 고갈됨에 따라, 재생 에너지 생산을 위한 보다 효과적인 방법에 대한 연구가 증가되었다. 연로전지 개발의 한 분야인 미생물 연료전지(MFC)는 이중 성능의 잠재력 덕분에 발전하였다. MFC는 박테리아와 같은 전극 감소 생물에서 전력을 모아서 전기 에너지를 생산한다. MFC는 폐수를 연료로 사용하여 에너지를 생산하고 폐수를 정화한다. 양성자 교환막(PEM)은 양극과 음극 챔버의 분리막으로, 양성자만 효과적으로 통과할 수 있게 하는 중요한 역할을 한다. Nafion은 MFC에 상업적으로 사용되는 PEM이지만 비용, 생산 시간, 양성자 전도성 차원에서 보완할 점들이 많다. 본 리뷰 논문에는 Nafion을 대체할 수 있는 새로 개발된 PEM 몇 가지를 논의하였다. 또한, PEM, 혼합 PEM 및 복합 PEM에 기반한 MFC를 요약하고자 한다.

Electricity Generation Coupled with Wastewater Treatment Using a Microbial Fuel Cell Composed of a Modified Cathode with a Ceramic Membrane and Cellulose Acetate Film

  • Seo, Ha-Na;Lee, Woo-Jin;Hwang, Tae-Sik;Park, Doo-Hyun
    • Journal of Microbiology and Biotechnology
    • /
    • 제19권9호
    • /
    • pp.1019-1027
    • /
    • 2009
  • A noncompartmented microbial fuel cell (NCMFC) composed of a Mn(IV)-carbon plate and a Fe(III)-carbon plate was used for electricity generation from organic wastewater without consumption of external energy. The Fe(III)-carbon plate, coated with a porous ceramic membrane and a semipermeable cellulose acetate film, was used as a cathode, which substituted for the catholyte and cathode. The Mn(IV)-carbon plate was used as an anode without a membrane or film coating. A solar cell connected to the NCMFC activated electricity generation and bacterial consumption of organic matter contained in the wastewater. More than 99% of the organic matter was biochemically oxidized during wastewater flow through the four NCMFC units. A predominant bacterium isolated from the anode surface in both the conventional and the solar cell-linked NCMFC was found to be more than 99% similar to a Mn(II)-oxidizing bacterium and Burkeholderia sp., based on 16S rDNA sequence analysis. The isolate reacted electrochemically with the Mn(IV)-modified anode and produced electricity in the NCMFC. After 90 days of incubation, a bacterial species that was enriched on the Mn(IV)-modified anode surface in all of the NCMFC units was found to be very similar to the initially isolated predominant species by comparing 16S rDNA sequences.

스텐철사를 전극으로 이용하는 미생물연료전지의 전류 발생 (Current Generation from Microbial Fuel Cell Using Stainless Steel Wire as Anode Electrode)

  • 장재경;김경민;변성아;유영선;장인섭;강연구;김영화
    • 대한환경공학회지
    • /
    • 제36권11호
    • /
    • pp.753-757
    • /
    • 2014
  • 산화전극부 전극은 단순히 전자를 받아 전달할 수 있는 역할 뿐만 아니라 공극이 많아 표면적이 큰 구조로 미생물을 고정화할 수 있는 표면적을 제공할 수 있어야 한다. 미생물의 수가 많을수록 폐수처리 효율과 전류발생을 높일 수 있기 때문이다. 따라서 전극은 미생물연료전지의 효율을 높일 수 있는 중요한 역할을 하는 인자 중의 하나이다. 본 연구는 미생물연료전지에 사용하는 고가의 흑연펠트를 스텐철사 타래(철 수세미)로 대체할 수 있는지 알아보기 위한 것이다. 이 연구에 사용된 가축분뇨는 전처리를 거친 후 유기오염물질(COD)로 500 mg/L로 희석한 것을 이용하였고, 이때 전류 발생은 스텐철사 타래를 적용하였을 때 약 5% 정도 낮았지만 큰 차이가 없는 것으로 나타났다. 유기오염물질(COD)의 감소는 스텐철사 타래를 이용하였을 때 88.3%이었으며, 흑연펠트를 사용하였을 때 82.4%로 스텐철사 타래의 제거율이 더 높게 나타났다. 암모니아성 질소 이온의 경우는 두 경우 모두 반응시간에 따라 농도 변화가 거의 없는 것으로 나타났다. 이 결과 스텐철사 타래를 적용하였을 때 전류발생이나 수처리 측면 모두 효과가 유사하거나 더 좋은 결과를 보였으며, 초기 시스템을 구축하는 비용을 약 1/50 정도로 줄일 수 있는 것으로 예상되어. 흑연펠트 대체제로 적용이 가능할 것으로 판단된다.