• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.11a
• /
• pp.229-232
• /
• 2006

The HPFRCCs show that the multiple crack propagation, high tensile strength and ductility due to the interfacial bonding of the fibers to the cement matrix. Moreover, performance of cement composites varies according to type and weight contents of reinforcing fiber. and HPFRCCs with hybrid fiber have better performance than HPFRCCs with single fiber in damage tolerance. Total four cylindrical specimens were tested, and the main variables were the type and weight contents of fiber, which was polyvinylalchol (PVA), polyethylene (PE). In order to clarify effect of hybrid types on the characteristics of fracture and damage process in cement composites, AE method was performed to detect micro-cracking in HPFRCCs under cyclic compression. Loading conditions of the uniaxial compression test were monotonic and cyclic loading. And from AE parameter value, it is found that the second and third compressive load cycles resulted in successive decrease of the amplitude as compared with the first compressive load cvcle.

• Applied Science and Convergence Technology
• /
• v.25 no.5
• /
• pp.92-97
• /
• 2016

Surface erosion using focused ion beam irradiation is the most promising technology for the realization of micro/nanofabrication. However, accurate fabrication of predefined structures is still challenging. This article introduces a single step surface driving method to fabricated predefined curved structures. The previously reported multi step surface driving method (MSDM) has been modified so that a single ion dose profile can be used instead of multiple ion dose profiles. Experimental realization of the method is presented with the fabrication of predefined curved surfaces as well as reference to surface propagation theory. For the purpose of verification, simulations are performed on the basis of a sound mathematical model.

• Nuclear Engineering and Technology
• /
• v.34 no.2
• /
• pp.132-141
• /
• 2002

The effects of microstructure on fretting wear were investigated in Inconel 690 tube. The microstructure observation indicated that the solution annealing temperature and time affected the grain size of the Inconel 690 tubes. The carbide morphology, along grain boundaries, was mainly affected by thermal treatment time and temperature. The wear test results showed that specimens with larger grain size and with coarse carbides along grain boundaries had better wear resistance. Cracks were found in specimens with carbides along the grain boundary, while few cracks were found in carbide free specimens. It seemed that the carbides on grain boundary assisted crack formation and propagation in carbide containing specimens. On the other hand, the micro-hardness of specimen did not have a major role in fretting wear. It could be inferred from the SEM images of worn surfaces that the main wear mechanism of carbide containing specimen was delamination, while that of carbide free specimen was abrasion.

• Smart Structures and Systems
• /
• v.29 no.6
• /
• pp.799-805
• /
• 2022

Permanent magnet synchronous motors (PMSMs) are widely used in systems requiring high control precision, efficiency, and reliability. Predicting the remaining useful life (RUL) with health monitoring of PMSMs prevents catastrophic failure and ensures reliable operation of system. In this study, a model-based method for predicting the RUL of PMSMs using phase current and vibration signals is proposed. The proposed method includes feature selection and RUL prediction based on a particle filter with a degradation model. The Paris-Erdogan model describing micro fatigue crack propagation is used as the degradation model. An experimental set-up to conduct accelerated life test, capable of monitoring various signals was designed in this study. Phase current and vibration data obtained from an accelerated life test of the PMSMs were used to verify the proposed approach. Features extracted from the data were clustered based on monotonicity and correlation clustering, respectively. The results identify the effectiveness of using the current data in predicting the RUL of PMSMs.

• Korean Journal of Environment and Ecology
• /
• v.33 no.6
• /
• pp.686-694
• /
• 2019

This study was carried out to identify the long-term changes to beech forest due to climate change in Ulleung-do. To study the traits of the stand structure of beech forest with micro-topography, we investigated the distribution of the basal area, important values, and indicated species in a small ridge between Albong basin and Seongin-bong peak, and 1-ha stands (20 m × 20 m, 25 sites) dominated beech species including on the upper slope and valley parts. The result showed that the indicator species characterizing the vegetation communities were Tsuga sieboldii, Rhododendron brachycarpum, and Mitchella undulata in the small ridge and Celtis jessoensis, Dryopteris crassirhizoma, and Ulmus laciniata in the valley part. Moreover, the individuals with the total DBH < 10 cm were more predominant in the small ridge and upper slope than in the valley part, the individuals with DBH = 10-25 cm were predominant in the small slope, and individuals with DBH = 25-45 cm and DBH > 45 cm were predominant in the upper slope. The reason for the predominant distribution of beech stand with DBH<10 cm in all terrains is suggested to be germination by nutritional propagation rather than secondary succession caused by artificial disturbances and seed propagation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• Korean Journal of Plant Resources
• /
• v.24 no.2
• /
• pp.121-129
• /
• 2011

As the molecular breeding was progressed, many plant transformation techniques were attained for improving transformation accuracy and used to produce useful transgenic plants. Day by day, new varieties were developed so new transformation techniques required for these newly developed varieties. Carnation (Dianthus caryophyllus L.) is a popular and economically important ornamental plant, all over the world. Keeping this in view, we selected 18 varieties of D. caryophyllus L. commonly available in the market and did optimization of culture conditions for more efficient tissue culture and to get higher number of plants via micro-propagation. Four varieties namely Yellowdotcom, Jakarta, Belmonte, Polartessino etc. were selected for organ culture studies from single cell line. The optimum growth was recorded in the MS media supplied with sucrose 3%, NAA 1.0 mg/L and TDZ 1.0 mg/L. except Belmonte, in which, BA 1.0 mg/L was found to be the best combination, in place of TDZ, rest ingredients were same. The most efficient coagulating agent used to obtain higher number of plant from callus was phytagel 0.3%. The most effective explant for higher shoot formation was stem in which 80.2% shoot formation was recorded. It also reduced culture periods by 6 days.

• Fire Science and Engineering
• /
• v.18 no.4
• /
• pp.57-63
• /
• 2004

We investigated heat properties of connection terminal in residual current protective devices(RCD) according to contact pressure for low voltage appliance. And we analyzed voltage and current waveform and oxide propagation when the poor-contact happened between terminal and wire. When contact pressure between terminal and connection wire was not applied, the heat was generated and an oxide was formed on the surface of the wire. The temperature of the insulation surrounding terminal was ascended sharply by poor-contact, micro-sparks and continuous arc sound happened in interior terminal. When the poor-contact by vibration occurred inner conductor of terminal and wire, an oxide was propagated on contact surface and the temperature was increased at 869℃. Thus, we found that the risk of electrical disaster is high in terminal and connection wire parts.

• Composites Research
• /
• v.14 no.5
• /
• pp.46-53
• /
• 2001

In this research, damage behavior of singly oriented ply (SOP) fiber metal laminate (FML) subjected to concentrated load was studied. The static indentation tests were conducted to study fiber orientation effect on damage behavior of FML. During the static indentation tests, acoustic emission technique (AE) was adopted to study damage characteristics of FML. AE signals were obtained by using AE sensor with 150kHz resonance frequency and the signals were compared with indentation curves of FML. The damage process of SOP FML was divided by three parts, i.e., crack initiation, crack propagation, and penetration. The AE characteristics during crack initiation show that the micro crack is initiated at lower ply of the plate, then propagate along the thickness of the plate with creating tiber debonding. The crack grow along the fiber direction with occurring 60∼80dB AE signal. During the penetration, the fiber breakage was observed. As fiber orientation increases, talc fiber breakage occurs more frequently. The AE signal behaviors support these results. Cumulative AE counts could well predict crack initiation and crack propagation and AE amplitude were useful for the prediction of damage failure mode.

• Journal of Plant Biotechnology
• /
• v.49 no.2
• /
• pp.124-130
• /
• 2022

The application of traditional taro propagation methods for large-scale cultivation would be insufficient to meet the high demand for quality planting materials. Therefore, this study aimed to develop an in vitro micro-propagation technique for two local taro cultivars (cv.), Wangi and Putih. Taro cormels were collected from the Malaysian Agricultural Research and Development Institute (MARDI) germplasm (Serdang, Malaysia). Explants were taken from the shoot tip of cormels and initially cultured on Murashige and Skoog (MS) basal media for four weeks. The explants were then transferred to different multiplication media supplemented with different types and concentrations of cytokinins such as 6-benzylaminopurine (BAP ) and Thidiazuron (TDZ). Shoot production was quantified after six weeks of culture. The highest mean number of new shoots was produced by the Wangi cultivar on MS medium supplemented with 2.0 mg/l BAP (2.10 shoots), MS medium supplemented with 0.5 mg/l TDZ (2.18 shoots), and Gamborg B5 medium supplemented with 6.0 mg/l BAP (2.43 shoots). The maximum average number of the Putih cultivar shoots was obtained on MS supplemented with 2.0 mg/l BAP (3.57 shoots). MS basal media was used for root initiation, as it produced an average of 25 roots with an 11-cm length. Various types of substrate mixtures were used during acclimatization. The best acclimatization substrate for the Wangi cultivar was 100% peat soil, whereas the Putih cultivar grew optimally in a combination of peat and perlites at a 1:1 ratio. Taro plantlets require approximately 4 to 6 weeks to acclimatize before they can be transferred to the field.