• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제28회 춘계학술대회논문집
• /
• pp.281-285
• /
• 2007

추력기의 성능 등을 예측하려면 기하학적 모양과 압력비를 고려한 노즐 유동 특성을 해석해야 한다. 이 논문에서는 연속체 역학 역학의 가정이 성립하는 한계를 파악하기 위해서 인공위성 자세 제어용으로 사용되는 실제 축대칭 노즐에서의 유동을 계산하였다. 유동은 정상 상태의 비반응 압축성 유동이고 비정렬 격자계를 사용하였다. 추력기의 면적비는 56이고 주위 압력의 진공도를 변경하면서 해석하였는데 그 압력이 $10^{-3}$ 기압 이하가 되면 연속체 역학은 더 이상 타당하지 않게 된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.392-392
• /
• 2011

Carbon nanotubes (CNT) emitter has widely become an attractive mechanism that draws growing interests for cold cathode field emission.$^{1,2}$ CNT yarns have demonstrated its potential as excellent field emitters.$^3$ Extensive simulations were carried out in designing a CNT yarn-based cathode assembly. The focal spot size dependence on the anode surface of the geometric parameters such as axial distance of the electrostatic focus lens from the cathode and the applied bias voltages at the cathode, grid mesh and electrostatic focus lens were studied. The detailed computer simulations using Opera 3D electromagnetic software$^4$ had revealed that a remarkable size of focal spot under a focusing lens triode type set-up design was achieved. The result of this optimization simulation would then be applied for the construction of the CNT yarn based micro-focus x-ray tube with its field emission characteristics evaluated.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권3호
• /
• pp.159-167
• /
• 2005

Quantization effects (QEs), which manifests when the device dimensions are comparable to the de Brogile wavelength, are becoming common physical phenomena in the present micro-/nanometer technology era. While most novel devices take advantage of QEs to achieve fast switching speed, miniature size and extremely small power consumption, the mainstream CMOS devices (with the exception of EEPROMs) are generally suffering in performance from these effects. In this paper, an analytical model accounting for the QEs and poly-depletion effects (PDEs) at the silicon (Si)/dielectric interface describing the capacitance-voltage (C-V) and current-voltage (I-V) characteristics of MOS devices with thin oxides is developed. It is also applicable to multi-layer gate-stack structures, since a general procedure is used for calculating the quantum inversion charge density. Using this inversion charge density, device characteristics are obtained. Also solutions for C-V can be quickly obtained without computational burden of solving over a physical grid. We conclude with comparison of the results obtained with our model and those obtained by self-consistent solution of the $Schr{\ddot{o}}dinger$ and Poisson equations and simulations reported previously in the literature. A good agreement was observed between them.

• 전력전자학회논문지
• /
• 제6권1호
• /
• pp.34-42
• /
• 2001

전지는 화학에너지를 기계적인 처리과정 없이 전기에너지로 직접 전환하는 장치이다. 부하전압과 부하전류의 용량에 따라 단위전지를 직.병렬 연결하여 사용하게 되며, 전지의 병렬운전은 단독운전 보다 전압강하를 더 천천히 발생시키므로 전압강하에 민감한 전력변환장치들의 효율에 밀접한 관계를 가지고 있다. 병렬운전의 필요성과 장점 때문에 대부분의 축전지를 사용하는 시스템은 병렬운전을 하고 있고, 반면에 선.구 축전지 사이에서 순환 전류가 흐르고, 자가방전이 일어나는 단점 또한 가지고 있다. 신 축전지에서 충.방전 전류가 과다하게 흐르는 불평형 현상과 이로 인해 축전지의 수명단축을 일으키게된다. 본 논문에서는 마이크로 프로세서를 사용하여 선.구 축전지 사이의 볼평형 전류를 검출하고 외부저항을 첨가시켜 내부저항의 차이에 대한 감소효과를 얻어 불평형 전류를 보상하였다. 이를 실험을 통해 구현하였다.

• 한국태양에너지학회 논문집
• /
• 제39권6호
• /
• pp.93-112
• /
• 2019

In this paper, a very new web-based software for renewable energy system (RES) design and economic evaluation was introduced. This solution would provide the precise RES estimation service including not only photovoltaic (PV), wind turbine (WT) and fuel cell (FC) individually but also energy storage system (ESS) as combined forms with PV or WT. The three reasons why we ought to develop it are: First, the standardized tool suitable to the domestic environment for estimating power generation from RES facilities and economic evaluation is required. Secondly, the standardized tool is needed to spread domestic RES supply policy and to promote the new industry in the micro-grid field. The last, the reliability of economic evaluation should be enhanced more for new facilities. To achieve those aims, the weather database of one hundred locations have established and the RES facility database has also constructed. For the energy management, mathematical models for PV, WT, ESS and FC were developed. As a final phase, the analytical process to evaluate economics has performed with field data verification.

• 조명전기설비학회논문지
• /
• 제23권12호
• /
• pp.106-114
• /
• 2009

본 논문에서는 전력시장 환경에 있어서 신재생 에너지를 포함한 마이크로그리드의 최적운영을 위한 발전계획 방안을 제시하였다. 마이크로그리드는 전력과 동시에 열을 공급할 수 있는 소규모 전력공급시스템으로 경제성 확보를 위한 운전최적화 알고리즘이 필요하다. 따라서 신재생 에너지는 발전 즉시 부하에 전력을 공급하도록 하고, 배터리는 부하평준화에 이용한다. 동적계획법을 적용하여 마이크로그리드 운전에 따른 수익 최대화가 가능한 마이크로그리드 운전 최적화 프로그램을 개발하였으며, 독립운전 및 계통연계 운전모드에서 개발 프로그램의 사레연구를 통해 프로그램의 유효성을 보이고 있다. 제안된 마이크로그리드 최적운영 프로그램은 향후 마이크로그리드 시장이 형성 되면 마이크로그리드의 경제적 운전기법 개발에 적용이 가능하다.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.617-626
• /
• 2020

The drilling mud is essentially used in oil and gas development. There are several roles of using the drilling mud, such as cleaning the bottomhole, cooling and lubricating the drill bit and string, transporting the cuttings to the surface, keeping and adjusting the wellbore pressure, and preventing the collapse of the wellbore. The fragments from rocks and micro-sized bubbles generated by the high pressure are mixed in the drilling mud. The systems to separate those mixtures and to keep the uniformly maintained quality of drilling mud are required. In this study, the simulation is conducted to verify the performance of the mud tank's agitation capacity. The primary role of the mud tank is the mixing of mud at the surface with controlling the mud condition. The container type is chosen as a mud tank pursuing efficient transport and better management of equipment. The single- and two-phase simulations about the agitation in the mud tank are performed to analyze and identify the inner flow behavior. The convergence of results is obtained for the vertical- and axis-direction velocity vector fields based on the grid-dependency tests. The mixing time analysis depending on the multiphase flow conditions indicates that the utilization of a two-stepped impeller with a smaller size provides less time for mixing. This study's results are expected to be utilized as the preliminary data to develop the mixing and integrating equipment of the onshore drilling mud system.

• Current Photovoltaic Research
• /
• 제9권2호
• /
• pp.51-58
• /
• 2021

Solar water pumping system (SWPS) is reliable and beneficial for Indian farmers in irrigation and crop production without accessing utility. The capability of easy installation and deployment, makes it an attractive option in remote areas without grid access. The selection of portable solar based pumps is pertaining to its longer life and economic viability due to lower running cost. The work presented in this manuscript intends to demonstrate performance analysis of portable systems. Consequent investigation reveals PSWS as the emerging option for rural household and marginal farmers. This can be attributed to the fact that, a considerable portion (around 45.7%) of the country's land is farmland and irrigation options are yet to reach farmers who entirely rely on rain water at present for harvesting of the crops. According to census 2010-2011 tube wells are the main source for irrigation amongst all other sources followed by canals. Out of the total 64.57-million-hectare net irrigation area, 48.16% is accounted by small and marginal holdings, 43.77% by semi-medium and medium holdings, and 8.07% by large holdings. As per 2015-16 census data, nearly 100 million farming households would struggle to make ends meet. The work included in this manuscript, presents the performance of different commercial brands and different technologies of DC surface solar water micro pumping systems have been studied (specifically, the centrifugal and reciprocating type pumps have been considered for analysis). The performance of the pumping systems has been analyzed and data is evaluated in terms of quantity of water impelled for specific head. The reciprocating pump has been observed to deliver the best system efficiency.

• 한국수소및신에너지학회논문집
• /
• 제33권6호
• /
• pp.845-855
• /
• 2022

In response to climate change, the world is continuing efforts to reduce fossil fuels, expand renewable energy, and improve energy efficiency with the goal of achieving carbon neutrality. In particular, R&D is being made on the value chain covering the entire cycle of hydrogen production, storage, transportation, and utilization in order to shift the energy supply system to focus on hydrogen energy. Hydrogen-based energy sources can produce heat and electricity at the same time, so it is possible to utilize heat energy, which can increase overall efficiency. In this study, calculation of the optimal scale for hydrogen-based cogeneration and the composition of heat sources were reviewed. It refers to a method of the optimal heat source size according to the external heat supply and heat storage to be considered. The results of this study can be used as basic data for establishing a hydrogen-based energy supply model in the future.

• 대한전자공학회논문지SD
• /
• 제47권11호
• /
• pp.1-5
• /
• 2010

본 논문에서는 외팔보 배열 구조를 가지는 MEMS 테스트 소켓을 SOI 웨이퍼를 이용하여 개발하였다. 외팔보는 연결부분의 기계적 취약점을 보완하기 위해 모서리가 둥근 형태를 가지고 있다. 측정에 사용 된 BGA IC 패키지는 볼 수 121개, 피치가 $650{\mu}m$, 볼 직경 $300{\mu}m$, 높이 $200{\mu}m$ 을 가지고 있다. 제작된 외팔보는 길이 $350{\mu}m$, 최대 폭 $200{\mu}m$, 최소 폭 $100{\mu}m$, 두께가 $10{\mu}m$인 곡선 형태의 외팔보이다. MEMS 테스트 소켓은 lift-off 기술과 Deep RIE 기술 등의 미세전기기계시스템(MEMS) 기술로 제작되었다. MEMS 테스트 소켓은 간단한 구조와 낮은 제작비, 미세 피치, 높은 핀 수와 빠른 프로토타입을 제작할 수 있다는 장점이 있다. MEMS 테스트의 특성을 평가하기 위해 deflection에 따른 접촉힘과 금속과 팁 사이의 저항과 접촉저항을 측정하였다. 제작된 외팔보는 $90{\mu}m$ deflection에 1.3 gf의 접촉힘을 나타내었다. 신호경로저항은 $17{\Omega}$ 이하였고 접촉저항은 평균 $0.73{\Omega}$ 정도였다. 제작된 테스트 소켓은 향 후 BGA IC 패키지 테스트에 적용 가능 할 것이다.