• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.693-696
• /
• 2009

The ray-tracing technique was used to optimize the light guide plate for the purpose of improving the on-axis luminance on the edge-lit backlights. One-dimensional prisms and engraved V-shaped patterns were applied to the upper and the lower surfaces of the light guide plate, respectively. By optimizing the apex angles of these micro-structures, as well as the shape of the reverseprism film put over the light guide plate, highly-collimated light-output distribution could be obtained on the backlight, which may contribute to the development of mobile LCD's with low power consumption.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.258-259
• /
• 2013

본 논문에서는 저가형의 고효율 이단형 탭인덕터 벅-부스트 컨버터를 적용한 마이크로 인버터를 제안한다. 제안하는 인버터는 정상상태 연속모드(CCM)에서 단상전력계통에 고역률의 정현파전류를 공급할 수 있는 새로운 구조이다. 강압시에는 벅 모드로 동작하며, 승압시에는 탭인덕터 부스트 모드로 동작한다. 정류형태의 전류를 인버터에 공급하며, 낮은 주파수를 사용하는 전파정류 인버터가 고역률의 교류 파형으로 변환한다. 벅-부스트에 탭인덕터를 적용함으로써 권선비에 따른 시비율을 조절할 수 있어 극단적인 승압시에도 벅-부스트의 도통을 적절히 유지할 수 있다. 제안하는 인버터는 정상상태 연속모드(CCM), 200W급 하드웨어 프로토타입을 통해 동작특성 및 효율 분석을 하였다.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.343-344
• /
• 2013

본 논문에서는 바이폴라 타입 DC 마이크로그리드의 전압 불균형을 보상하기 위한 전압 밸런싱 기법과 안정도 향상을 위한 제어기법을 제안하였다. 선로 임피던스와 부하 불균형에 의한 전압 불평형 문제를 해석하고 제안하는 기법을 통해 이를 해결하였으며 과도 상태에 대한 DC 배전계통의 안정도 향상기법을 개발하였다. 제안하는 시스템의 동작 타당성을 체계적으로 분석하기 위해 PSCAD/EMTDC 소프트웨어를 이용한 시뮬레이션 모델을 개발하고 그 성능을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2527-2529
• /
• 1998

Measurement equipment, which consists of He-Ne laser, objective lens, CCD camera and position sensitive detector, was developed for the dynamic response of micromirror. This equipment can measure the tilting direction and angle, the rise time and frequency response of micromirror to the input signal. It was found that the rise time of the micromirror was less than 10${\mu}m$ and the resonant frequency was about 25kHz.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.144-149
• /
• 2004

Porous anodic alumina has been used widely for corrosion protection of aluminum surfaces or as dielectric material in micro-electronics applications. It exhibits a homogeneous morphology of parallel pores which can easily be controlled between 10 and 400nm. It has been applied as a template for fabrication of the nanometerscale composite. In this study, mechanical properties of the AAO structures are measured by the nano indentation method. Nano indentation technique is one of the most effective method to measure the mechanical properties of nano-structures. Basically, hardness and elastic modulus can be obtained by the nano-indentation. Using the nano-indentation method, we investigated the mechanical properties of the AAO structure with different size of nano-holes. In results, we find the hole effect that changes the mechanical properties as size of nano hole.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2002.12a
• /
• pp.13-13
• /
• 2002

A Spatial light modulator (SLM) is a real-time programmable device having the modulation function of the amplitude, phase or polarization of an optical wavefront as a function of position via electrical or optical control signals. Various types of reusable SLMs with two-dimensional pixel arrays are centrally important devices in volumetric recording, data processing, pattern recognition, optical computer and other optical system. (omitted)

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.423-426
• /
• 2002

Undoped-GaN thin film is deposited on Sapphire substrate by MOCVD. SAW velocity is measured with tile center frequency by HP8753C. Center frequency is 266.52 MHz and SAW velocity is 5330㎧ when wavelength was 20 Um. insertion loss, Q factor and side love attenuation is 41.265 dB, 257.41 and over 23 dB. k'i is calculated from tile measured data. k2'is from 1 % to 4 %. TCF is -61.817pp/m/$^{\circ}C$.

• Journal of electromagnetic engineering and science
• /
• v.8 no.1
• /
• pp.6-11
• /
• 2008

Advances in low power design open the possibility to harvest energy from the environment to power electronic circuits. Electrical energy can be harvested from piezoelectric transducer. Piezoelectric materials can be used as mechanisms to transfer mechanical energy usually vibrating system into electrical energy that can be stored and used to power other devices. Micro- to milli-watts power can be generated from vibrating system. We developed definitive and analytical models to predict the power generated from a cantilever beam attached with piezoelectric transducer. Analytical models are pin-force method, enhanced pin-force method and Euler-Bernoulli method. Harmonic oscillations and random noise will be the two different forcing functions used to drive each system. It has been selected the best model for generating electric power based upon the analytical results obtained.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.308-311
• /
• 2001

Most of the battery charger for electric powered forklift truck are controlled by the method of 3-phased constant current and constant voltage. However, these chargers have several disadvantages like a large charger capacity, and a short battery life time. This paper presents a digital type battery charger based on multi-mode control adding a constant power control and several assistant controls in the conventional control. The whole control system is performed by a low cost one-chip micro-controller and completely digitize. So we can get a high precision control and a good reliability.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.30-31
• /
• 2017

본 논문은 인터리브드 준공진 플라이백 컨버터에 추가회로 없이 적용된 최적의 밸리 스위칭 기법을 제안한다. 인터리브드 준공진 플라이백 컨버터는 스위치 양단 전압(Drain-Source voltage)$V_{DS}$이 최소화 되는 지점에서 스위치 턴 온이 되어 전체 시스템의 효율이 향상되고, EMI (Electro Magnetic Interference)와 EMC (Electro Magnetic Compatibility)의 영향을 최소화시킬 수 있다. 제안한 기법은 MCU (Micro Controller Unit) 기반 소용량 컨버터에 간단한 수식을 이용하여 최적의 밸리 스위칭 기법을 가능하게 한다. 제안한 기법은 시스템의 가격과 부피 상승 없이 효율을 향상시키고, EMI와 EMC의 영향을 최소화시킨다. 제안하는 기법의 성능은 시뮬레이션을 통해 확인하였다.