• 대한치과교정학회지
• /
• 제28권4호
• /
• pp.641-657
• /
• 1998

본 연구는 열을 이용한 금속 브라켓의 재생 처리시, 기저부 형태와 브라켓 재생 방법에 따른 전단접착강도 및 브라켓 탈락 양상을 비교하고자 시행되었다. 교정 치료를 위해 발거된 건전한 소구치 252개를 수집하고, Type I, Type II, Type III 스탠다드 브라켓을 각각 재생 방법에 따라 네 군으로 나누어 준비된 소구치에 접착하고, Instron Universal Testing Machine(Model 4466)으로 전단접착강도를 측정하였으며, 브라켓의 탈락 양상을 관찰하고 브라켓 기저부의 주사전자현미경 소견을 관찰하였다. SPSS 통계처 리 프로그램을 이용하여 일원분산분석(oneway ANOVA), Scheffe's multiple range test를 실시하여 다음과 같은 결론을 얻었다. 1. 브라켓 기저부 형태에 따른 전단접착강도는 유의차가 있었으며(p<0.001), 그 크기는 Type III(round indentation, micro-etched base), Typ I(foil-mesh base), Type II(grooved integral base, micro-etched)의 순이었다. 2. 생 방법에 따른 전단접착강도는, Type I, Tpe II 브라켓에서는 Big Jane에 1분간 처리시 우수한 결과를 보였고 (p<0.05), Type III 브라켓에서는 각 군간 유의한 차이를 보이지 않았다(p>0.05). 3. Type I, Type II 브라켓은 기저부-레진 계면에서 가장 높은 빈도로 탈락하였고, Type III 브라켓에서는 레진의 절반 가량이 치면에 잔존하는 탈락 양상이 가장 많았다. 4. 탈락 양상에 따라 탈락시의 전단접착강도가 유의성 있는 차이를 보였는데(p<0.05),브라켓 탈락시 접착제의 절반 가량이 치면에 잔존하는 경우 전단접착강도가 가장 큰 것으로 나타났다. 5. 브라켓 재생 후 기저부에 남아 있는 접착제는 전단접착강도의 감소에 영향을 미치지 않았다.

• 한국세라믹학회지
• /
• 제52권6호
• /
• pp.441-448
• /
• 2015

Silicon carbide (SiC) coatings for tri-isotropic (TRISO) nuclear fuel particles were fabricated using a chemical vapor deposition (CVD) process onto graphite. A micro-tensile-testing system was developed for the mechanical characterization of SiC coatings at high temperatures. The fracture strength of the SiC coatings was characterized by the developed micro-tensile test in the range of $25^{\circ}C$ to $1000^{\circ}C$. Two types of CVD-SiC films were prepared for the micro-tensile test. SiC-A exhibited a large grain size (0.4 ~ 0.6 m) and the [111] preferred orientation, while SiC-B had a small grain size (0.2 ~ 0.3 mm) and the [220] preferred orientation. Free silicon (Si) was co-deposited onto SiC-B, and stacking faults also existed in the SiC-B structure. The fracture strengths of the CVD-SiC coatings, as measured by the high-temperature micro-tensile test, decreased with the testing temperature. The high-temperature fracture strengths of CVD-SiC coatings were related to the microstructure and defects of the CVD-SiC coatings.

• 한국재료학회지
• /
• 제18권1호
• /
• pp.38-44
• /
• 2008

The micro-structural changes, strength characteristics, and micro-fractural behaviors at the joint interface between a Sn-4.0wt%Ag-0.5wt%Cu solder ball and UBM treated by isothermal aging are reported. From the reflow process for the joint interface, a small amount of intermetallic compound was formed. With an increase in the isothermal aging time, the type and amount of the intermetallic compound changed. The interface without an isothermal treatment showed a ductile fracture. However, with an increase in the aging time, a brittle fracture occurred on the interface due mainly to the increase in the size of the intermetallic compounds and voids. As a result, a drastic degradation in the shear strength was observed. From a microshear test by a scanning electron microscope, the generation of micro-cracks was initiated from the voids at the joint interface. They propagated along the same interface, resulting in coalescence with neighboring cracks into larger cracks. With an increase in the aging time, the generation of the micro-structural cracks was enhanced and the degree of propagation also accelerated.

• 소성∙가공
• /
• 제19권3호
• /
• pp.191-196
• /
• 2010

Tungsten-carbide as typical difficult-to-cut material has excellent mechanical properties such as high thermal resistivity, mechanical strength and chemical durability. However, it is next to impossible for tungsten-carbide to be fabricated the needed parts by cutting process. In this study, for establishing the micro fabrication method of tungsten-carbide for micro injection or compression molding core, the investigation on micro cutting characteristics of tungsten-carbide green part which is made by powder injection molding process and easy to cut relatively was performed. For this, micro endmilling experiments of tungsten-carbide green part were performed according to various cutting conditions. Finally, the wear trend of micro endmill and the appearance of micro rib according to feed-rate and cutting depth per step were analyzed through SEM images of micro cutting feature and microscope images of micro tools.

• 한국정밀공학회지
• /
• 제24권6호
• /
• pp.105-112
• /
• 2007

Tungsten wire micro electrochemical machining (W-wire micro ECM) with ultra-short pulses enables precise micro machining of metal. In wire micro ECM, platinum wire has been used because it is electrochemically stable. However, the micro metal wire with low strength is easily deformed by hydrogen bubbles which are generated during the machining. The wire deformation decreases the machining accuracy. To reduce the influence of hydrogen bubbles, in this paper, the use of tungsten wire was investigated. To improve machining accuracy, suitable pulse conditions which affect generation of bubbles were also investigated. The tungsten wire micro ECM can be applied to the fabrication of various shapes. Using this method, various micro-parts and shapes were fabricated.

• Journal of Information Processing Systems
• /
• 제13권4호
• /
• pp.987-999
• /
• 2017

Extraction of influential people from their respective domains has attained the attention of scholastic community during current epoch. This study introduces an innovative interaction strength metric for retrieval of the most influential users in the online social network. The interactive strength is measured by three factors, namely re-tweet strength, commencing intensity and mentioning density. In this article, we design a novel algorithm called IPRank that considers the communications from perspectives of followers and followees in order to mine and rank the most influential people based on proposed interaction strength metric. We conducted extensive experiments to evaluate the strength and rank of each user in the micro-blog network. The comparative analysis validates that IPRank discovered high ranked people in terms of interaction strength. While the prior algorithm placed some low influenced people at high rank. The proposed model uncovers influential people due to inclusion of a novel interaction strength metric that improves results significantly in contrast with prior algorithm.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.29-34
• /
• 1992

In this experimental study, we aimed at the improvement of compressive strength of artifitial light weight aggregate concrete by using the micro powders of mudstone for concrete admixture. By it's result, there was about 10% increase of compressive strength in concrete adding the 10% amounts of powders for cement contents than that of plain concrete.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.309-317
• /
• 2012

Recent years have witnessed the use of micro shock tube in various engineering applications like micro combustion, micro propulsion, particle delivery systems etc. The flow characteristics occurring in the micro shock tube shows a considerable deviation from that of well established conventional macro shock tube due to very low Reynolds number and high Knudsen number effects. Also the diaphragm rupture process, which is considered to be instantaneous process in many of the conventional shock tubes, will be crucial for micro shock tubes in determining the near diaphragm flow field and shock formation. In the present study, an axi-symmetric CFD method has been applied to simulate the micro shock tube, with Maxwell's slip velocity and temperature jump boundary conditions. The effects of finite diaphragm rupture process on the flow field and the shock formation was investigated, in detail. The results show that the shock strength attenuates rapidly as it propagates through micro shock tubes.

• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.117-127
• /
• 1991

The purpose of this study was to evaluate the effect of surface treatment of fractured metal-ceramic crown on bond strength of porcelain repair resin. The specimens were divided into two groups for metal specimens add five groups for porcelain specimens by surface treatment methods. the metal specimens were treated by 2 methods. : micro-sandblasting with $50{\mu}m$ aluminum oxide and grinding with diamond bur. The porcelain specimens were treated by 5 methods : micro-sandblasting with $50{\mu}m$ aluminum oxide, grinding with diamond bur, etching with porcelain etching agent, combination of micro-sandblasting and etching procedure, and combination of grinding and etching procedure. After surface treatment, each specimen was bonded with composite resin and the bond strength was measured and the surface texture was observed by scanning electromicroscope(SEM). The results were as follows : 1. There was significant difference in shear bond strength between metal specimen and prorcelain specimen. 2. Bood strength of metal specimens treated with diamond bur was higher than that treated with $50{\mu}m$ aluminum oxide sandblasting. 3. Bond strength of porcelain specimen treated with diamond bur was higher than that treated with $50{\mu}m$ aluminum oxide sandblasting and porcelain etching agent. 4. There was no significant difference in shear bond strength between the group treated with diamond bur and combined treatment groups respectively. 5. The large undercuts were observed in group treated with diamond bur by SEM.

• 대한치과교정학회지
• /
• 제27권1호
• /
• pp.157-171
• /
• 1997

TiN ion-plating이 교정용 브라켓의 접착강도에 미치는 영향을 알아보기 위하여 세 종류의 서로 다른 기저면형태를 가지는 스테인레스 스틸제의 브라켓을 선택하고, TiN ion-plating 된 브라켓과 ion-plating 되지 않은 브라켓을 치아에 접착시켰을 때 초기 및 장기접착강도, 접착계면의 주사전자현미경 관찰, 파단면의 주사전자현미경 관찰을 비교 분석하여 다음과 같은 결론을 얻었다. ${\cdot}$ TiN ion-plating을 하지 않은 경우 24 시간 후의 접착강도는 Micro-Loc형이 $5.89{\pm}1.77MPa$, Foil Mesh형이 $4.27{\pm}1.12MPa$, Undercut형이 $2.64{\pm}0.58MPa$로 Micro-Loc형 이 가장 높았고, 그 다음이 Foil Mesh형 그리고 Undercut 형의 순으로 나타났다(P<0.05). ${\cdot}$ TiN ion-plating시 24시간 투의 접착강도는 Micro-Loc형이 $6.26{\pm}1.51MPa$, Foil Mesh형이 $7.45{\pm}2.01MPa$, Undercut형 이 $2.93{\pm}0.84 MPa$로 ion-plating 하지 않은 경우와 달리 Foil Mesh형이 Micro-Loc형보다 오히려 높게 나타났고, Undercut형이 역시 가장 낮은 접착강도를 나타내었다(P<0.05). Ion-plating 유무에 따른 24시간 후의 접착강도는 3가지형 모두에서 ion-plating시 증가하였으나 Foil Mesh형에서만 유의한 증가가 있었다(P<0.001). ${\cdot}$ 장기침적시 ion-plaling의 유무에 관계없이 전반적으로 초기(1일)접착강도보다 증가하였으며 접착력의 안정성을 나타내었다. ${\cdot}$ 접착계면의 주사전자현미경 관찰 결과 브라켓 기저면의 형태나 ion-plating 유무에 관계 없이 레진이 브라켓 기저면으로 잘 퍼져들어가 브라켓과 치아와의 사이에 견고한 접착면을 나타내었고, 장기침적의 경우도 같은 양상을 나타내었다. ${\cdot}$ 파단면의 주사전자현미경 관찰에서는 다양한 파괴 양상이 나타났다.