• 한국자동차공학회논문집
• /
• 제16권1호
• /
• pp.86-92
• /
• 2008

Recently, the use of tubes in the manufacturing of the automobile parts has increased and therefore many automotive manufactures have tried to use hydro-forming technology. The hydro-forming technology may cause many advantages to automotive applications in terms of better structural integrity of the parts, lower cost from fewer part count, material saving, weight reduction, lower spring-back, improved strength and durability and design flexibility. In this study, the whole process of front engine cradle (or front sub-frame) parts development by tube hydro-forming using steel material having tensile strength of 440MPa grade is presented. At the part design stage, it requires feasibility study and process design aided by CAE (Computer Aided Design) to confirm hydro-formability in details. Effects of parameters such as internal pressure, axial feeding and geometry shape on automotive sub-frame by hydro-forming process were carefully investigated. Overall possibility of hydro-formable sub-frame parts could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending, preforming and hydro-forming. At the die design stage, all the components of prototyping tools are designed and interference with press is examined from the point of geometry and thinning.

• Computers and Concrete
• /
• 제26권3호
• /
• pp.203-211
• /
• 2020

Turkey is located in one of the most seismically active regions of in Europe. The majority of the population living in big cities are at high seismic risk due to insufficient structural resistance of the existing buildings. Such a seismic risk brings the need for a comprehensive seismic evaluation based on the risk analysis in Turkey. Determining the seismic resistance level of existing building stock against the earthquakes is the first step to reduce the damages in a possible earthquake. Recently in January 2020, the Elazig earthquake brought the importance of the issue again in the public. However, the excessive amount of building stock, labor, and resource problems made the implementation phase almost impossible and revealed the necessity to carry out alternative studies on this issue. This study aims for a detailed investigation of residential buildings in Antalya, Turkey. The approach proposed here can be considered an improved state of building survey methods previously identified in Turkey's Design Code. Antalya, Turkey's fifth most populous city, with a population over 2.5 Million, was investigated as divided into sub-regions to understand the vulnerability, and a threshold value found for the study area. In this study, 26,610 reinforced concrete buildings between 1 to 7 stories in Antalya were examined by using the rapid visual assessment method. A specific threshold value for the city of Antalya was determined with the second level examination and statistical methods carried out in the determined sub-region. With the micro zonation process, regions below the threshold value are defined as the priority areas that need to be examined in detail. The developed methodology can be easily calibrated for application in other cities and can be used to determine new threshold values for those cities.

• 한국콘텐츠학회논문지
• /
• 제5권3호
• /
• pp.9-17
• /
• 2005

최근 정보통신기술의 급속한 발달로 무선인터넷을 이용한 전자상거래 사용자가 폭발적으로 증가하고 유선에서 유/무선 통합 환경으로 변화함에 따라 보안상의 많은 문제점이 제시되고 있다. 현재 무선 전자상 거래에서 사용하는 WPP는 WAP의 무선과 유선을 연계하는 GW에서 보안 취약점이 있고 또 다른 AIP는 인중서 체인 이용으로 계산량이 많고 사용자의 신원이 노출되는 단점이 있다. 이 논문에서는 기존 AIP 프로토콜을 기반으로 하는 특수한 타원곡선인 Weil Pairing을 적용한 ID 기반 공개키 암호기법을 사용하여 거래정보의 기밀성을 보장하고 은닉전자서명 기법을 통한 인증서를 사용하여 프라이버시 보호와, 공개키와 사용자 인증 및 부인방지를 해결하였으며 또한 두 객체만 공유하는 세션키를 사용하여 종 단간 보안을 제공하는 특정 무선 플랫폼에 독립적이며 안전하고 효율적인 지불 프로토콜을 제안한다.

• 한국콘텐츠학회논문지
• /
• 제9권2호
• /
• pp.432-438
• /
• 2009

본 연구에서는 마이크로 라만 스펙트럼을 이용한 급성 알코올성 간 손상과 만성 에탄올 간섬유증의 진단을 위해, 전처리 과정을 거친 스펙트럼으로부터 변별력 있는 피크를 추출하여 자동 분류기를 이용한 진단하는 방법을 살펴보았다. 전처리 단계에서는 기준선의 왜곡을 제거한 후 피크 보존에 유용한 Savitzky-Golay 필터를 이용하여 smoothing하였다. 전처리 후 급성 알코올성 간 손상과 만성 에탄올성 간섬유증을 구분할 수 있는 변별력 있는 스펙트럼 피크를 확인하고 이를 이용하여 MAP과 신경망으로 분류하였으며 실험 결과에 의하면 제안한 전처리 방법과 자동 분류기로 만성 에탄올성 간섬유증과 급성 알코올성 간 손상을 80% 이상 분류할 수 있었고, 이는 특징 벡터로 사용한 피크가 간 질병 진단에 사용될 수 있는 가능성을 보여준다고 할 수 있다.

• 한국재료학회지
• /
• 제26권10호
• /
• pp.561-569
• /
• 2016

$SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ phosphorescent phosphors were synthesized using the polymerized complex method. Generally, phosphorescent phosphors synthesized by conventional solid state reaction show a micro-sized particle diameter; thus, this process is restricted to applications such as phosphorescent ink and paint. However, it is possible to synthesize homogeneous multi-component powders with fine particle diameter by wet process such as the polymerized complex method. The characteristics of $SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ powders prepared by polymerized complex method with one and two step calcination processes were comparatively analyzed. Temperatures of organic material removal and crystallization were observed through TG-DTA analysis. The crystalline phase and crystallite size of the $SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ phosphorescent phosphors were analyzed by XRD. Microstructures and afterglow characteristics of the $SrAl_2O_4$: $Eu^{2+}$ and $Dy^{3+}$ phosphors were measured by SEM and spectrofluorometry, respectively.

• 상하수도학회지
• /
• 제21권2호
• /
• pp.243-252
• /
• 2007

Effects of alum dosage on the particle growth were investigated by monitoring particle counts in a rapid mixing process. Kaolin was used for turbid water sample and several other chemicals were added to adjust pH and ionic strength. The range of velocity gradient and mixing time applied for rapid mixing were $200{\sim}300sec^{-1}$ and 30~180 sec, respectively. Particle distribution in the synthetic water sample was close to the natural water where their turbidity was same. The number of particles in the range of $10.0{\sim}12.0{\mu}m$ increased rapidly with rapid mixing time at alum dose of 20mg/L, however, the number of $8.0{\sim}9.0{\mu}m$ particles increased at alum dose of 50mg/L. The number of $14.0{\sim}25.0{\mu}m$ particles at alum dose of 20mg/L was 10 times higher than them at alum dose of 50mg/L. Dominant particle growth was monitored at the lower alum dose than the optimum dose from a jar test at an extended rapid mixing time(about 120 sec). The number of $8.0{\sim}14.0{\mu}m$ particles was lower both at a higher alum doses and higher G values. At G value of $200sec^{-1}$ and at alum dose of 10-20mg/L, residual turbidity was lower as the mixing time increased. But at alum dose above 40mg/L and at same G value, lower residual turbidity occurred in a short rapid mixing time. Low residual turbidity at G value of $300sec^{-1}$ occurred both at lower alum doses and at shorter mixing time comparing to the results at G value of $200sec^{-1}$.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권2호
• /
• pp.111-124
• /
• 2002

The ferroelectric RAM (FeRAM) has a great advantage for a system on a chip (SOC) and mobile product memory, since FeRAM not only supports non-volatility but also delivers a fast memory access similar to that of DRAM and SRAM. This work develops at three levels: 1) low voltage operation with boost voltage control of bitline and plateline, 2) reducing bitline capacitance with multiple divided sub cell array, and 3) increasing chip performance with write operation sharing both active and precharge time period. The key techniques are implemented on the proposed hierarchy bitline scheme with proposed hybrid-bitline and high voltage boost control. The test chip and simulation results show the performance of sub-1.5 voltage operation with single step pumping voltage and self-boost control in a cell array block of 1024 ($64{\;}{\times}{\;}16$) rows and 64 columns.

• 한국지능시스템학회논문지
• /
• 제14권7호
• /
• pp.871-877
• /
• 2004

본 논문은 맞춤형 신발제작을 위하여 신발에 필요한 화형제작용 데이터를 3차원 측정 장치를 통해 획득한 발의 형상을 인공지능 기법을 기반으로 하는 최적화된 형상을 복원하는 방법을 제시하고자 한다. 본 연구를 위해 개발된 시스템은 PC를 기반으로 하는 기존의 3차원측정 방식을 이용하여 상, 하, 좌, 우로 각각 장착된8대의 CCD 카메라와 4대의 laser를 통해 화형 및 발의 형상 데이터를 획득한다. 획득된 데이터들은 인공지능 기법을 이용한 영상처리 알고리즘으로 처리되며, 처리 결과는 기존의 지능 기법을 도입하지 않은 시스템에 비해 노이즈제거 특성이 향상되었고, 후처리과정을 간소화 할 수 있다. 따라서 본 논문에서는 3차원 측정을 위해 하드웨어적인 부분과 이를 제어하기 위한 소프트웨어 및 GUI로 전체 시스템을 구성하고, 본 논문에서는 데이터 처리용 소프트웨어에서 입력영상의 전처리 과정 중 영상의 이진화 단계에서 임계값을 결정하기 위하여 신경망을 사용하였으며, 이에 대한 결과를 제시하고자 한다.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제2권1호
• /
• pp.29-37
• /
• 2014

본 연구에서는 저 레이놀즈수에서의 Kline-Fogleman 익형과 이를 적용한 날개의 공력특성을 분석하였다. 레이놀즈수 $2.4{\times}10^5$ 이하 영역에서 양항비가 향상됨을 확인하였으며, 특히 레이놀즈수 $1{\times}10^4$에서 양항비가 26% 향상되었다. 양항비 측면에서 Kline-Fogleman 익형이 날개 중앙에 위치하는 것이 가장 유리하며, 전체 날개에 대한 Kline-Fogleman 익형의 면적이 80%일 때 양항비가 20% 증가함을 확인하였다. 이 때 항속시간은 12% 향상되었다. 또한 날개의 구조적 안정성과 양항비 향상률을 고려하였을 때 Kline-Fogleman 익형의 면적을 50%에서 80%사이로 설계하는 것이 유리할 것으로 판단된다.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.679-698
• /
• 2020

In this paper, the meshless local Petrov-Galerkin (MLPG) method is developed for dynamic analysis of non-symmetric nanocomposite cylindrical shell equations of elastic wave motion with nonlinear grading patterns under shock loading. The mechanical properties of the nanocomposite cylinder are obtained based on a micro-mechanical model. In this study, four kinds of grading patterns are assumed for carbon nanotube mechanical properties. The displacements can be approximated using shape function so, the multiquadrics (MQ) Radial Basis Functions (RBF) are used as the shape function. In order to discretize the derived equations in time domains, the Newmark time approximation scheme with suitable time step is used. To demonstrate the accuracy of the present method for dynamic analysis, at the first a problem verifies with analytical solution and then the present method compares with the finite element method (FEM), finally, the present method verifies by using the element free Galerkin (EFG) method. The comparison shows the high capacity and accuracy of the present method in the dynamic analysis of cylindrical shells. The capability of the present method to dynamic analysis of non-symmetric nanocomposite cylindrical shell is demonstrated by dynamic analysis of the cylinder with different kinds of grading patterns and angle of nanocomposite reinforcements. The present method shows high accuracy, efficiency and capability to dynamic analysis of non-symmetric nanocomposite cylindrical shell, which it furnishes a ground for a more flexible design.