• Journal of the Korean Chemical Society
• /
• v.65 no.3
• /
• pp.197-202
• /
• 2021

In this study, activated clay treated with H₂SO₄ (20% by weight) and heat at 90 ℃ for 8 h for acid white soil was used as an adsorbent for the removal of PO₄^3--P in water. Prior to the adsorption experiment, the characteristics of activated clay was examined by X-ray Fluorescence Spectrometry (XRF) and BET surface area analyser. The adsorption of PO₄^3--P on activated clay was steeply increased within 0.25 h and reached equilibrium at 4 h. At 5 mg/L of low PO₄^3--P concentration, roughly 98% of adsorption efficiency was accomplished by activated clay. The adsorption data of PO₄^3--P were introduced to the adsorption isotherm and kinetic models. It was seen that both Freundlich and Langmuir isotherms were applied well to describe the adsorption behavior of PO₄^3--P on activated clay. For adsorption PO₄^3--P on activated clay, the Freundlich and Langmuir isotherm coefficients, K_F and Q, were found to be 8.3 and 20.0 mg/g, respectively. The pseudo-second-order kinetics model was more suitable for adsorption of PO₄^3--P in water/activated clay system owing to the higher correlation coefficient R² and the more proximity value of the experimental value q_e,exp and the calculated value q_e,cal than the pseudo-first-order kinetics model. The results of study indicate that activated clay could be used as an efficient adsorbent for the removal of PO₄³-P from water.

• Archives of Obesity and Metabolism
• /
• v.1 no.1
• /
• pp.4-13
• /
• 2022

Currently, pharmacotherapy is becoming essential for obesity, owing to its expanding and increasing epidemiology. In this review, novel peptide-based drugs of four classes are covered: GLP-1 receptor agonist, GIP/GLP-1 receptor dual agonist, glucagon/GLP-1 receptor dual agonist, and a combination of amylin receptor agonist/GLP-1 receptor agonist. Semaglutide is a next-generation GLP-1 receptor agonist with a longer duration and stronger weight and glucose reduction effects than liraglutide and dulaglutide. In the STEP1 trial, semaglutide 2.4 mg reduced body weight by approximately 15% in people with obesity with similar or milder adverse events than liraglutide 3.0 mg. Tirzepatide, a GIP/GLP-1 receptor dual agonist, also has a long duration and strong weight- and glucose-lowering effect. According to SURPASS-2, 3, and 4, in patients with BMI≥25 kg/m² and type 2 diabetes mellitus (T2DM), tirzepatide 15 mg reduced the initial body weight by >13%. Cotadutide, a glucagon/GLP-1 receptor dual agonist, showed weaker weight-lowering effects than semaglutide and tirzepatide, while it was comparable to that of liraglutide in a phase 2 clinical trial for non-alcoholic fatty liver disease in patients with BMI≥25 kg/m² and T2DM. Additionally, its effect on the liver was noticeable. The long-acting amylin receptor agonist cargrilintide combined with semaglutide can be another effective option for obesity treatment. Even in a small phase 1 trial with a short study period of 20 weeks, cargrilintide 2.4 mg/semaglutide 2.4 mg reduced by 17% of initial body weight in people with BMI 27-39.9 kg/m². In coming several years, semaglutide, tirzepatide, and cargrilintide/semaglutide will become available for obesity treatment in Korea.

• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.25-30
• /
• 2016

We investigated the possibility of a bio-monitoring system for detecting hypoxic water in coastal area using shell valve movements of Pacific oyster (Crassostrea gigas), which showed most aquaculture production in Korea, with Hall element sensor. In filtrating water to confirm shell valve movement (SVM) under normal condition, it showed spikes which mean a relatively fast closing condition after opened condition of average 5~12 mm, and then the SVM showed back to opening condition slower than closing speed SVM numbers during light period were similar to that of dark period (p<0.05). When dissolved oxygen (DO) concentration was reduced from 7 mg l^-1 to 3 mg l^-1, SVM numbers were increasing with decreasing of DO, and showed abnormality SVMs as compare with normal condition. Moreover, in the condition of 2 mg l^-1, Distance between light and left shell showed gradually decreased, and then we could not detected SVMs due to closed condition. Thus, if we quickly detect abnormal environmental variations as hypoxia water using bio-monitoring of SVM, it may be contribute to increased productivity by dramatically reducing damages in aquaculture.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.3
• /
• pp.22-27
• /
• 2023

Magnetic properties of MgB₂ superconducting powder were investigated. M(H), the magnetic field H dependence of magnetization M, was measured and analyzed using a PPMS instrument. The MgB₂ superconducting powder showed high critical current density J_c > ~ 10⁷ A/cm² and clean limit superconducting properties. The equilibrium magnetization M_eq properties of MgB₂ powders exhibiting various superconducting properties were studied. We find that the equilibrium magnetization M_eq(H) properties of MgB₂ powders showing conventional BCS properties deviate from the predictions of the standard local-London theory at temperatures below T = 19 K and are in good agreement with the generalized nonlocal-London theory. Nonlocal-London analysis was used to determine and analyze the nonlocal parameters. The temperature dependence of the London penetration depth values λ(T) was studied.

• Korean Journal of Materials Research
• /
• v.33 no.1
• /
• pp.15-20
• /
• 2023

'Tracers' are bullets that emit light at the backside so that the shooter can see the trajectory of their flight. These light-emitting bullets allow snipers to hit targets faster and more accurately. Conventional tracers are all combustion type which use the heat generated upon ignition. However, the conventional tracer has a fire risk at the impact site due to the residual flame and has a by-product that can contaminate the inside of the gun and lead to firearm failure. To resolve these problems, it is necessary to develop non-combustion-type tracers that can convert heat to luminance, so-called 'thermoluminescence (TL)'. Here, we highly improve the thermoluminescence properties of MgB₄O₇ through co-doping of Dy³⁺+Ce³⁺ and Dy³⁺+Na⁺. The presence of doping materials (Dy³⁺, Ce³⁺, Na⁺) was confirmed by XPS (X-ray photoelectron spectroscopy). The as-synthesized co-doped MgB₄O₇ was irradiated with a specific radiation dose and heated to 500 ℃under dark conditions. Different thermoluminescence characteristics were exhibited depending on the type or amounts of doping elements, and the highest luminance of 370 cd/m² was obtained when Dy 10 % and Na 5 % were co-doped.

• Clean Technology
• /
• v.27 no.4
• /
• pp.359-366
• /
• 2021

Halloysite nanotubes (HNTs), the multiwalled clay mineral with the composition of Al₂Si₂O₅(OH)₄·nH₂O, have been highlighted as a low-cost adsorbent for the removal of dyes from wastewater. Although a powder of halloysite presents a high specific surface area, forming media are significantly considered due to sludge-clogging induced by the water-bound agglomeration. However, higher firing temperature to achieve the structural durability of the media and lower utilization rate due to longer penetration depth into the media act as hurdles to increase the dye-adsorption capacity. In this work, the retention of the adsorption capacity of halloysite was evaluated with methylene blue solution after the heat treatment at 750 ℃. In order to improve the utilization rate, tubular media were fabricated by extrusion. The images taken by transmission electron microscopy show that HNTs present excellent structural stability under heat treatment. The HNTs also provide superb capacity retention for MB adsorption (93%, 18.5 mg g^-1), while the diatomite and Magnesol^® XL show 22% (7.65 mg g^-1) and 6% (11.7 mg g^-1), respectively. Additionally, compositing with lignin enhances adsorption capacity, and the heat treatment under the hydrogen atmosphere accelerates the adsorption in the early stage. Compared to the rod-type, the tubular halloysite media rapidly increases methylene blue adsorption capacity.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.483-488
• /
• 2015

This study examined the adsorption characteristics of $Cr^{6+}$ and $As^{3+}$ in the aqueous solution by Hizikia susiformis biochar which was collected from Jeju Island. The optimal pH for $Cr^{6+}$ and $As^{3+}$ adsorption were 2 and pH 6, respectively. Kinetic data showed that the adsorption occurred during the first 100 min, and the most of heavy metals were bound to biochars within 300 min. Moreover, the kinetic data presented that the course of adsorption follows the Pseudo first and second order models. The equilibrium data were well fitted by the Langmuir model and the $Cr^{6+}$ adsorption capacity (25.91 mg/g) was higher than that of $As^{3+}$ (16.54 mg/g). From these results, the seaweed biochar was shown to be a efficient adsorbent for $Cr^{6+}$ and $As^{3+}$ metals in a contaminated environment.

• Korean Journal of Environmental Biology
• /
• v.40 no.3
• /
• pp.267-274
• /
• 2022

Excess nitrogen (N) flowing from livestock manure to water systems poses a serious threat to the natural environment. Thus, livestock wastewater management has recently drawn attention to this related field. This study first attempted to obtain the optimal conditions for the further volatilization of NH₃ gas generated from pig wastewater by adjusting the amount of injected magnesia (MgO). At 0.8 wt.% of MgO (by pig wastewater weight), the volatility rate of NH₃ increased to 75.5% after a day of aeration compared to untreated samples (pig wastewater itself). This phenomenon was attributed to increases in the pH of pig wastewater as MgO dissolved in it, increasing the volatilization efficiency of NH₃. The initial pH of pig wastewater was 8.4, and the pH was 9.2 when MgO was added up to 0.8 wt.%. Second, the residual ammonia nitrogen (NH₄⁺-N) in pig wastewater was removed by precipitation in the form of struvite (NH₄MgPO₄·6H₂O) by adjusting the pH after adding MgO and H₃PO₄. Struvite produced in the pig wastewater was identified by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) analysis. White precipitates began to form at pH 6, and the higher the pH, the lower the concentration of NH₄⁺-N in pig wastewater. Of the total 86.1% of NH₄⁺-N removed, 62.4% was achieved at pH 6, which was the highest removal rate. Furthermore, how struvite changes with pH was investigated. Under conditions of pH 11 or higher, the synthesized struvite was completely decomposed. The yield of struvite in the precipitate was determined to be between 68% and 84% through a variety of analyses.

• Analytical Science and Technology
• /
• v.29 no.5
• /
• pp.209-218
• /
• 2016

PM₁₀ and PM_2.5 samples were collected at the 1100 site of Mt. Halla in Jeju Island during 2011~2012, and their ionic and elemental species were analyzed, in order to investigate the characteristics of emission sources as well as aerosol compositions. The mass concentrations of PM₁₀ and PM_2.5 were 22.0±13.1 µg/m³ and 11.3±6.1 µg/m³, respectively, showing 2.4~2.6 times lower than those of the capital city area of Korea. The composition ratios of major secondary pollutants (nss-SO₄²⁻, NH₄⁺, and NO₃⁻) were the highest as 85.5 % for PM₁₀ and 91.3 % for PM_2.5, and followed by the order of marine (Na⁺, Cl⁻, and Mg²⁺), organic acid (HCOO⁻ and CH₃COO⁻), and soil (nss-Ca²⁺) sources. Among the elemental species in PM₁₀, soil-originated components (Al, Fe, and Ca) were consisted of 50.9 %, which was higher proportion than marine and anthropogenic elements. The acidification of the fine particulate matters was found to be influenced mostly by sulfuric and nitric acids, and these acids were mainly neutralized by calcium carbonate in PM₁₀ and by ammonia in PM_2.5. The clustered back trajectories showed that 47 % of total air mass inflows was from the China, and the concentrations of NO₃⁻ and nss-Ca²⁺ were especially high corresponding to the inflows.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.59-65
• /
• 2023

Sodium hydroxide solutions are often employed as sterilization agents in the pharmaceutical industry. Here, the chloride content is considered as a critical impurity. In this study, an electrochemical method was developed to remove chloride ions (Cl^-) through the oxidative deposition of AgCl on a Ag anode. The Cl^- content in the commercially available 50% w/w NaOH solution employed was approximately 100 mg Cl^-/kg NaOH. As the OH^- content is approximately 18,000 times higher than the Cl^- content, the formation of AgCl may be expected to be thermodynamically less favorable than the formation of Ag₂O. However, activation energies for AgCl and Ag₂O formation have been reported to be approximately 3.8 and 31.2 kJ/mol, respectively, and indicate that AgCl formation is favored. AgCl can be selectively produced by controlling the anode potential. Here, the Cl^- concentration was reduced to less than 50 mg Cl^-/kg NaOH when an anode potential of 0.18 or 0.19 V vs. Hg/HgO (reference electrode) was applied for one hour at 50℃. XRD analysis and visual monitoring of the Ag anode confirmed the oxidative deposition of AgCl on the anode surface as well as the electrochemical desalination of the concentrated NaOH solution.