• Journal of the Korean Society of Food Science and Nutrition
• /
• v.18 no.3
• /
• pp.348-355
• /
• 1989

This experiment was conducted to investigate the characteristics of alkaline protease from Aspergillus fumigatus which was isolated from soil as a superior strain for the production of the alkaline protease. The optimum temperature for enzyme activity was $50^{\circ}C$ and optimum pH was 9.0. The enzyme was stable at pH 8.0 to 10.0 and thermal inactivation was shown $30^{\circ}C$. The activity of the enzyme was increased by the addition of $Mn^{++},\;Cu^{++},\;Ba^{++},\;Mg^{++},\;$wheras it was inhibitied by $K^+,\;Fe^{+++},\;Ag^+,\;Pb^{++},\;Na^+,\;Ca^{++},\;Hg^+,\;Zn^{++}$. EDTA. 2, 4-DNP, ${\varepsilon}-amino$ caproic acid did not show inhibitory effect on the proteolytic activity of alkaline protease but P-chloromercuribenzoic acid inhibited the enzyme activity, indicating that reactive sulfhydryl group is required for the enzymatic activity. The reaction of this enzyme followed typical Michael-Menten Kinetics with the Km value of $8.33{\times}10^{-4}mole/{\ell}$ with the Vmax of $47.62{\mu}g/min$. This enzyme had stronger proteolytic activity than trypsin on substrate such as casin and hemoglibin.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.2
• /
• pp.122-128
• /
• 2015

PURPOSE. To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (${\alpha}$=.05), respectively. RESULTS. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION. Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (< $120{\mu}m$). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

• Journal of Surface Science and Engineering
• /
• v.48 no.3
• /
• pp.121-125
• /
• 2015

We studied the blue fluorescent OLED with Mg:Ag, Al, Ni as anode materials. Blue fluorescent OLEDs were fabricated using Anode / $MoO_3$ (3 nm) / 2-TNATA (60 nm) / NPB (30 nm) / SH-1 : BD-2 (5 vol.%, 30 nm) / Bphen (40 nm) / Liq (1 nm) / Al (150 nm). Current density of OLED with Mg:Ag was not measured due to too low work function, and that of OLED with Al showed $45.2mA/cm^2$ at 12 V. Luminance and Current efficiency of OLED with Al showed $385.1cd/m^2$ and 0.9 cd/A. Current density of OLED with Ni of 8, 10, 12 nm thickness showed 10, 12.9, $37.2mA/cm^2$, respectively. Luminance and Current efficiency of OLED with Ni of 8, 10, 12 nm thickness showed 670.9, 991.2, $1,320cd/m^2$ and 6.7, 7.7, 3.6 cd/A, respectively. Transmittance of Al was 52.2% at 476 nm wavelength and that of Ni of 8, 10, 12 nm thickness was 79, 77, 74 %, respectively. In spite of best current density, OLED with Al showed the lowest luminance and current efficiency because of low work function and poor transmittance. When thickness of Ni was increased to 12nm, current efficiency was sharply lower owing to bad transmittance and unbalance of holes and electrons. Finally, OLED with Ni of 10 nm thicknes showed the highest current efficiency.

• Korean Journal of Environmental Biology
• /
• v.22 no.3
• /
• pp.394-399
• /
• 2004

A BOD sensor was prepared with S. marcescens LSY4 and was applied for measurement of BOD values of a solution containing the standard organic pollutants. The sensor sensitivity was nearly independent of the culture time in the range of 9-16 hours. It was also affected little by the cell mass in the range of 0.22-0.75 mg $cm^{-2}$. A cyclic change in the solution pH in the range of 4-9 was accompanied by a reversible variation in the sensor sensitivity. However, the reversibility was lost when the solution pH became more acidic or more basic. Heavy metal ions lowered the sensor sensitivity, which took place more precipitously in the presence of $Cu^{2+}$ and $Ag^+$ rather than in the presence of $Zn^{2+}$ and $Cd^{2+}$. The reduction of the sensor sensitivity was significantly attenuated by loading heavy metal ion tolerance induced strain. The $Cu^{2+}$tolerance induced strain was more efficient for the attenuation than $Zn^{2+}$ and $Cd^{2+}$ tolerance induced strain.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.450-450
• /
• 2006

Organic light-emitting diodes (OLED) as pixels for flat panel displays are being actively pursued because of their relatively simple structure, high brightness, and self-emitting nature [1, 2]. The top-emitting diode structure is preferred because of their geometrical advantage allowing high pixel resolution [3]. To enhance the performance of TOLEDs, it is important to deposit transparent top cathode films, such as transparent conducting oxides (TCOs), which have high transparency as well as low resistance. In this work, we report on investigation of the characteristics of an indium tin oxide (ITO) cathode electrode, which was deposited on organic films by using a radio-frequency magnetron sputtering method, for use in top-emitting organic light emitting diodes (TOLED). The cathode electrode composed of a very thin layer of Mg-Ag and an overlaying ITO film. The Mg-Ag reduces the contact resistivity and plasma damage to the underlying organic layer during the ITO sputtering process. Transfer length method (TLM) patterns were defined by the standard shadow mask for measuring specific contact resistances. The spacing between the TLM pads varied from 30 to $75\;{\mu}m$. The electrical properties of ITO as a function of the deposition and annealing conditions were investigated. The surface roughness as a function of the plasma conditions was determined by Atomic Force Microscopes (AFM).

• The Plant Pathology Journal
• /
• v.17 no.1
• /
• pp.36-39
• /
• 2001

The secondary effects of pencycuron on cell membrane of Rhizoctonia solani AG4 were investigated by the observation of giant protoplast formation and lipid peroxidation. Compared to protoplasts of R. solani R-C (sensitive strain) and Rh-131 (non-sensitive strain) increased in their size by 2.0-3.5 times 12 h after incubation in potato-dextrose broth containing novozyme (7 mg/$m\ell$) and $\beta$-glucuronidase ($60\mu\textrm{g}/$\textrm{ml}) with 0.6 M mannitol (pH 5.2). The increase of protoplast size in R-C was slightly inhibited from $13.8\textrm{mg}/\textrm{ml}$ without pencycuron to 10.3 ${\mu}{\textrm}{m}$ with 1.0$\mu\textrm{g}$/$m\ell$ of pencycuron. However, the size of giant protoplast of Rh-131 was not affected by the pencycuron treatment. Both strains R-C and Rh-131 did not exhibit the lipid peroxidation 12 h after the application of 1.0 $\mu\textrm{g}$/$m\ell$ pencycuron. The remarkable peroxidation of membrane lipid was observed only in R-C 24 h after pencycuron application, but not in Rh-131. Althought the inhibition of giant protoplast formation and the membrane lipid peroxidation were observed only in the sensitive strain R-C by pencycuron, it is difficult to conclude that these are the primary mechanism of pencycuron. The mild activity of pencycuron on the inhibition of giant protoplast formation and late membrane lipid peroxidation in the fungicide-sensitive strain did not noincid with the dramatic activity of pencycuron in R. solani. Therefore, our results suggest that inhibition of giant protoplast formation and membrane lipid peroxidation is the secondary effect of pencycuron.

• Journal of Plant Biotechnology
• /
• v.41 no.4
• /
• pp.236-241
• /
• 2014

An efficient regeneration protocol for stem disc culture of Populus euramericana, which is important species for bioenergy resource in agroforestry, was established. The number of explants that were obtained and the number of explants that regenerated varied with the genotypes. However, in all the genotypes, stem disc culture produced more regenerated shoots than did in axillary bud culture. A comparison of the effects of cytokinin type and concentration on shoot regeneration in different explants (i.e., petiole, leaf, and root segments of P. euramericana) revealed that a concentration of $0.002mg\;l^{-1}$ thidiazuron (TDZ) used on petiole segments resulted in the greatest shoot regeneration (95.83%). The hormonal requirements for the greatest shoot regeneration in the three explant types varied. Different concentrations of $AgNO_3$ and $CoCl_2$ were added separately to the medium to stop the yellowing and subsequent necrosis of the regenerated shoots. Lower concentrations (3 and $5mg\;l^{-1}$) of these compounds improved shoot regeneration and elongation, compared with the control. The in vitro-regenerated shoots were transferred to rooting medium and subsequently acclimatized. The highly efficient regeneration system of P. euramericana reported here can be used for mass propagation of this recalcitrant for regeneration, economically important tree species.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.1
• /
• pp.16-22
• /
• 2014

Purpose: The purpose of this study was to assess the marginal and mesial fitness of zirconia single copings and 3-unit fixed partial dentures (FPDs) manufactured with an identical model. Materials and Methods: An epoxy model in which the maxillary right 2nd premolar is lost and maxillary 1st premolar and 2nd molar are formed as abutments was manufactured and scanned by using a laser scanner. A ten units of zirconia single copings were manufactured for maxillary 1st premolar and 2nd molar, respectively and the same number of 3-unit FPDs were manufactured. For the measurements of fitness, the manufactured silicone replicas were divided into four parts and the fitness were measured by digital microscope at measurement points (P1, P2, P3, P4 and P5) of each plane. The measured gaps were classified into three categories: marginal gap (MG, P1), axial gap (AG, average of P2 and P3), occlusal gap (OG, average of P4 and P5). Results: The ranges of MG, AG and OG for single copings were 18.47 - 40.54 ${\mu}m$, 39.73 - 73.61 ${\mu}m$ and 116.90 - 134.69 ${\mu}m$, respectively. The ranges of MG, AG and OG for 3-unit FPDs were 45.95 - 87.44 ${\mu}m$, 23.78 - 57.00 ${\mu}m$ and 99.89 - 131.06 ${\mu}m$, respectively. Conclusion: The result of the study shows that the MGs for 3-unit FPDs were higher than those of single copings, though they are within the range of clinical acceptance, indicating that the use of more homogeneous zirconia block and modification of sintering processes are needed to ensure the prevention of increase of gap in 3-unit FPDs.

• Animal cells and systems
• /
• v.15 no.3
• /
• pp.203-210
• /
• 2011

In the present study, we examined the effects of caffeine on food intake and body weight, and pro-opiomelanocortin (POMC) and agouti-related protein (AgRP) expression in the hypothalamus. Rats were administered intraperitoneally with 100 mg/kg caffeine (a high, non-toxic dose) or saline during the light phase. Intraperitoneal administration of caffeine induced a significant reduction in food intake and body weight 12 hr after treatment. In addition, POMC expression was significantly increased and AgRP expression was decreased in the arcuate nucleus (Arc) after caffeine treatment. These results demonstrate that administration of caffeine up-regulates POMC expression and down-regulates AgRP expression in the Arc, suggesting that the activation of the hypothalamic POMC neurons and inhibition of the AgRP neurons might play a role in the regulation of food intake and body weight by caffeine.

• Progress in Superconductivity and Cryogenics
• /
• v.5 no.3
• /
• pp.15-19
• /
• 2003

For the purpose of standardization of the critical current measurement, it is meaningful to describe how $I_{c}$ will behave as the stress/strain level changes. In this study, strain dependencies of the critical current $I_{c}$ in Ag-alloy sheathed multifilamentary Bi(2212) and Bi(2223) superconducting tapes were evaluated at 77K, 0T. The external reinforcement was accomplished by soldering AgMgNi alloy tapes onto single or both sides of the sample. With the external reinforcement to the Bi(2212) tape, the strength of the tapes increased but the critical current at the strain free state, $I_{c0}$ decreased in some cases. The strain for onset of the $I_{c}$ degradation, $\varepsilon$$_{\irr}$, increased with an increase of the reinforcing volume and then saturated to a certain value. The effect of external reinforcement on the degradation of $I_{c}$ due to the bending strain in the Bi(2223) tape was also examined. Contrary to the expectation, it showed a significant $I_{c}$ degradation even at a small strain of 0.4 %. The observations of damage morphologies gave a good explanation to the $I_{c}$ behavior.c/ behavior.r.