• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1097-1106
• /
• 2007

Rail provides running tract for train and broadly and widely conveys the weight of the train exerted from the train wheels that the rail directly supports onto the cross tie and roadbed, and supports the cross-sectional pressure exerted by centrifugal force at curvatures. That is, stationary rail provides surface on which dynamic train runs and guarantees cross-sectional resistance to enable the vertical snake motion of the train wheels as well as to maintain lateral force at curvatures. Rail provides running surface on which train wheels can run smoothly, and secures vertical and lateral force. However, it undergoes continuous destructive reactions (wearing and damages) and abrasion of the cladding by the train wheels. It is obvious that wearing will result when two metal parts act against each other. However, occurrence of abnormal wearing such as rapid wearing of the rail side due to complex generation of various mechanisms at the contact surface between the rail and train wheel flange. It is not easy to simply examine the causes of occurrence of abnormal wearing of rail and train wheel flange. Although countless number of academicians and specialists are conducting researches on abnormal wearing of rail and vertical wearing of train wheels, I believe it is too early to argue on pros and cons due to insufficiency of officially verified information on the issue. This review will be focusing on the examples of repairs that reduced the generation of abnormal wearing of rail by reviewing and improving characteristics of wearing and slack, speed of the train and cant as well as status of lubricator by choosing the compound curves present in the section between the $Anguk{\sim}Jongno3-ga$ Stations of the Route No. 3 among the compound curve tracks of the Seoul Metro Routes No. 3 & 4 at which abnormal wearing is generated continuously.

• 한국철도학회논문집
• /
• 제11권3호
• /
• pp.326-333
• /
• 2008

본 논문은 누적통과톤수에 의한 레일교체기준 개정을 위한 기초 데이터를 제시하는데 목적이 있다. 본 연구에서는 국외의 누적통과톤수에 의한 레일교체기준의 산정근거를 조사하였으며, 일본에서 조사된 레일용접부 결합유형 및 원인과 국내 철도운영기관인 서울메트로의 궤도유지관리이력을 조사하여 실제 레일절손과 누적통과톤수의 상관관계를 분석하였다. 또한, 누적통과톤수 기준치에 도래한 노후레일 용접부를 현장에서 발췌하여 레일용접부 휨시험을 수행하였다. 그 결과, 누적통과톤수와 레일절손간의 상관관계는 뚜렷하지 않았으며 레일용접부의 시공불량에 의한 절손사례가 많은 것으로 분석되었다. 또한, 노후레일휨시험 결과 신규레일용접부에 비해 파괴강도가 $17{\sim}18%$만이 저하된 것으로 나타나 레안교체기준에 도래한 노후레일은 사용성 측면에서 충분한 내구성 및 내하력을 확보하고 있는 것으로 분석되었다.

• 문화기술의 융합
• /
• 제4권4호
• /
• pp.413-418
• /
• 2018

본 연구에서는 도시철도 콘크리트 궤도(STEDEF)구조에 발생된 레일파상마모의 발생원인과 이에 따른 궤도부 담력의 수준을 분석하고자 실 운행열차를 대상으로 현장측정을 수행하여 동적 윤중, 레일저부휨응력 및 침목변위를 측정하였다. 동적 윤중 측정데이터를 이용한 주파수 분석을 통해 측정구간에 발생된 파상마모의 발생원인을 실험적으로 입증하였으며, 파상마모가 동적 윤중, 레일휨응력 및 침목변위 증가에 미치는 영향을 분석하였다. 연구결과, 레일 표면에 발생된 주기적인 요철형상의 파상마모는 동적 윤중을 증폭시키고 이에 따라 레일 휨응력 및 침목변위를 최대 1.7배 이사 크게 증가시킬 수 있는 것으로 분석되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.58-68
• /
• 2007

철도차량 옥상 정비시 산업재해를 방지하기 위해서는 안전성을 확보한 철저한 준비 및 검토가 선행 되어야한다. 차량의 정비시 공정별 위험요소 및 제반 문제점을 도출하여 해결함으로써, 산업 재해를 방지 할수 있다. 차량의 중 정비시 추락 재해는 옥상 작업인 차량의 옥상에서 발생한다. 정비의 특성상 차량을 분리하고, 차량의 대차를 분리 한후, 받침대 위에 차량을 올려놓은 상태에서, 옥상 작업은 안전 시설의 효과적인 설치 및 활용이 어렵다. 4M 에 의한 분석을 통하여, 옥상 작업시 차량의 지붕에 안전 난간을 설치하여, 추락 재해를 방지하고, 심리적 불안감을 해소하여, 안전하게 작업할 수 있는 방안을 연구 하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.324-329
• /
• 2010

The surroundings around subway are becoming more lively for project of CBD (an redevelopment project), however vibrations which are made through passing train cold spread buildings around. The structure-borne noise could be generated at the same time that makes people including developers and th citizens have negative viewpoint on railway. Especially, Seoul Metro 1-4 lines ar built alongside the road nearby houses and business district. That could make plenty of public resentments because of the structure-borne noise. Seoul Metro should make active alternative plans for their future urban environment projects which will be conducted. The case was Railway Facility which were conducted to minimize structure-borne noise from sharp curved track section (4 line, Sinyongsan~Ichon, R 250m). The section is adjacent to house district as near as 6.6m related with pusing international city project, the 4th urban environment project around international building, near Yongsan station. The interval of sleepers would be downsized in half with breaking existing case, and pad stiffness is reduced 4 ton from 10 ton. That makes structure-borne noise minimized because of vibrations are lowered about 19.1-23.0db. The structure above has remained for a year and a half from October, 2008, and had not any trouble to perform excellence with 80million ton rail accumulated tonnage.

• 한국정밀공학회지
• /
• 제28권4호
• /
• pp.427-435
• /
• 2011

This paper deals with the measurement and analysis of the squeal noise according to the curvature of rail. The squeal noise is generated by the friction between the railway with curve and the wheel. The squeal noise is a big problem in Busan Metro Line 3. If the developing panel type ANC(Active Noise Control) system which is attached to the floor can reduce 5 dB in below 500 Hz, the sound pressure level of the whole band pass can be reduced about 4-4.8 dB in squeal noise above the curvature of R400. Curve squeal noise is the intense high frequency tonal that can occur when a railway vehicle transverses a curve. The frequency range is from around 500 to almost 20,000 Hz, with noise levels up to about 15 dB in curve.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 학술대회 논문집 전문대학교육위원
• /
• pp.191-193
• /
• 2007

Pantograph sliding plate abrasion auto-detect system, one of the electric rail car auto-detecting devices, is a system that decides how much abrasion and when to replace without an inspector physically looking at the abrasion on the wet plate using machine vision, a cutting-edge technology. This paper covers the cause of deteriorating reliability that affects pantograph wet plate edge detection due to noise added to the video when it rains. In order to remove such noise, problems should be checked through Smoothing, Averaging mask and Median filter using filtering technique and stable edge detection without being affected by noise should be induced in video measurement used in machine vision technology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1301-1307
• /
• 2008

The Seoul-Metro is the first city railroad corporation to operate RIMS(Rolling-stock Information Maintenance System). The development of "RIMS Project" and trial running task were started from Mar 29, 2001. Finally, this project was completed successfully on Dec 31, 2005, as integrated systems including light or heavy maintenance works in Ji-Chuk and Chang-Dong Rolling-stock Offices. After that, from 2006 to Dec 31, 2007, we promoted a this new program to other four rolling-stock offices (Su-Seo, Gun-Ja, Sin-Jeong) and the headquarter. For the duration of trial running, we developed and applied new complementary program having made up for the weak points or defects. The series of new program which were newly developed and applied are comprised of an operation management, trouble management, wheel management, heavy maintenance table automatic creation programs and ordering prediction programs to purchase goods smoothly. The Seoul-Metro have registered these programs(RIMS) to Computer Program Protection Committee. We'd like to introduce a composition of program for enhancement of a city railroad Information Systems.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.974-980
• /
• 2006

The government makes an effort to disperse the centralization of Seoul through the its surroundings development for relieving the various social problems caused by the capital region concentration. But, the planless development of rail system in the capital region have made it difficult to approach into Seoul city center from its surroundings. Through Seoul metro line 9, constructed by private company first in Korea, that has operation plan with normal and express train together, we would like to study up on promotion of passenger service quality such as "the improvement of the accessibility to Seoul city center from its surroundings" and "service of various pattern of trains"

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.447-454
• /
• 2010

레일 피로 열화손상유형들은 크게 레일표면에서 발생하는 결함들과 레일내부에서 진전되어 발생하는 결함들로 구분되어질 수 있다. 본 연구에서는 국내에서 연간 누적통과톤수가 가장 많은 도시철도의 운행조건을 고려하여 현장측정을 통해 레일표면 요철성장률을 분석하였으며, 연마 후 누적통과톤수에 따른 시험편을 현장에서 발췌하여 현미경을 이용한 조직검사, 화학성분검사, 마이크로 비커스 경도시험을 수행하였다. 시험결과 신품레일의 경우 유효탈탄층 제거를 위해 약 0.3mm의 초기연마를 시행해야하며, 예방연마의 경우 전구간을 일괄적으로 연마할 경우와 특정 구간별로 구분하여 연마할 경우에 대하여 2가지 방안을 제시하여 레일표면에서 발생하는 RCF결함을 예방하거나 제거할 수 있도록 제시하였다.