In the latest, it's increasing an applied technology to be related with growth of industry circles. It's one of them a software to be used in industry circles. and It's most important part to apply an industrial equipment, so software to take charge of major part is indicative performance of quipment. At this time, it's inspired an evaluation and measurement of software quality to have within industrial equipment, and it's forming the research and development by the inside and outside of the country. For this, it's constructed a valuation metric to be based on ISO/IEC 12119, the International Standard for general the terms desired of quality of software and ISO/IEC 9126-2, the International Standard of the terms valuation of qualify for evaluation and measure, and for this accomplishment, It has been designed and developed industrial software international standard compatible approval system which approve a quality based on quality test result of industrial software using the ISO/IEC 14598-6 that international standard for organization of evaluation module.
Single path routing schemes using dynamic routing metric amy find out the dynamic network status and recompute paths to keep the traffic from the highly loaded regions of the network. This type of routing approach, however, may lead to a routing oscillation, and further, it cannot exploit multi-paths that may frequently exist in the real network. We propose a multipath routing scheme with dynamic load balancing, called MP-DLB, which is capable of reducing the overhead incurred by the multipath routing with dynamic load balancing approach while taking advantage of the high routing performance provided by the approach. According to the analysis of Internet packet traces which show that a high percentage of network traffic is destined for a small number of networks, MP-DLB applies the multipath routing with dynamic load balancing only to a limited subset of all the destinations in the network. For the rest of the destinations, it applies traditional single path routing scheme. This approach may reduce overall routing overheads by limiting the number of destinations to apply the more complicated routing scheme while it can keep the routing performance high by providing efficient routing for the most significant traffic in the routing performance. A series of simulations are done to analyze the performance of MP-DLB. The simulation results show that MP-DLB may effectively cope with the congestion and achieve high routing performance by distributing traffic streams that are generated from varying sources and heading toward a specific hot destination over multi-paths.
We suppose that Poback-cheok appeared with wearing clothes in the ancient times. At first, man used body as a scale, and it is gradually diversified with social development. It is clear that also in the time of Shilla-Dynasty, the United Shilla-Dynasty and the Goryeo-Dynasty, the system of degree existed in historical relation to that of China. But we don't know it's real length, because there is no recording until the beginning of the Yi-Dynasty. The first recording about Poback-cheok appeared in the time of the King Sejong. Hwangjong-Cheok which is a original vessel of the degree system appears in the 7th years of the King Sejong. In the 12th years of the King Sejong, Ju-cheok, Youngjo-cheok and Joyegi-cheok appeared. In the 13th years of the King Sejong, Poback-cheok appeared as a new changed one. At that time, the length of Poback-cheok is recorded as 44.75cm in chapter of Oye and Jonsoo Pobaek-cheok is recorded as 46.73cm in Jeonjesangjeongso's picture, and it is recorded as 46.80cm in the Kyunggugdaijeon. The scale system is put in good order in the time of King Sejong. But it is confused by the war of 1636 after King Seonjo period. In the 26 th year of King Youngjo, it is reappeared as one of the King Sejong, and it is fixed as 46.80cm. The length is used until the proclamation in the 6th years of the Kwangmu(1902), and then the length of Pobaek-cheok is changed as 48.48 cm, that is measured by a Gok-cheok. After that time, the scale system is very confused during the introduction of new civilization and the Korean-Japanes Unit. So it is used longer or shorter(that is, 49.24cm or 48.91cm). And the metric system is introduced by Japanes in 1926, and it reached the present time. According to use, the actual thing with is used in the end of the Yi-Dynasty is various from 30cm to 70cm. And according to material and craft-man, it can be devided into Hwa-gag scale, Najeon-blacklacquer-scale, bamboo-scale, wooden-scale. The way of expression of measure is always followed by the decimal system. The other half part, except the part of expression of graduation, is put on decorate with a pattern. Also we can see the idea of living on this point.
Medieval European practical art and style of costume is studied through referring to the literatures. The type of clothing that was seen on tapestries arts and crafts paintings and wall paintings and appeared in the architecture such as church. There were symbolic aspects of color motifs at this period and some restraints for clothing according to the social class, It was a period that draped garments due to the War of Crusades is appeared. Be-cause the medieval taste and decorative character is not only 'formative art' but also the taste beyoud 'mode' and atomsphere of that times it could be seen the strong reflec-tion of customs in the clothing of that times which is shown in works of art. 1) The purpose of Christian art which was found in mosaics stained glasses wall pain-tings and statues of architecture was not just the revival of natural phenomena but visuali-zation of sacred and invisible things. It was valuable to understandin of the spiritual through the sense organ It was a monumental art that was combined with decorative func-tion and role of the Bible. It revealed what was about the religious spiritual miracle, 2) In the medieval European painting characteristic and beautiful creativity was the basis of an argument. Both "Worship of East-ern" that is painted ion a parchment and "Cor-onation of Charles VI" were described decor-ation motifs on the edge of buildings geo-metric patterns and others with outstanding skill. there were precise technologic skill of architect and glassmen and lots of patience of craftsmen. " The Labour of the Months" and the scene of"A Trial at the Court" is also de-scribed elaborately. 3) Tapestry was developed in France Ger-many Swiss at the 14th century. Religionary and historical themes unicorn lady bird flowering plants and others were major motifs. It was very important as decorative wall coverings and as practical door arch and bed hangings. It was made through patient hard work with simple technique and it was con-sidered as an art for practical use. Tapestry was what everyone wish to have. It is reckoned for the item of the best gift. The royalty and nobility ordered and used custom-made tapestries. Sometimes the subject of motifs consisted of series which were deeply related to living 4) Decorative arts and crafts was the art that used materials such as precious metals jewels and others and that accorded with the luxurious and gorgeous taste of the royalty and nobility. Christian considered splendid and beautiful color of light as a symbol of glory. They used also for church appliances, There were metal crafts wood crafts textile crafts and others, As was stated above the costume appeared on the arts and crafts for living revealed the process of changes saw how the politic econ-omic and social organizations were developed.and social organizations were developed.
Kim, Myung-Hyun;Han, Min-Su;Nam, Hyung-Kyu;Kang, Kee-Kyung;Kim, Miran
Korean Journal of Soil Science and Fertilizer
/
v.45
no.6
/
pp.1136-1142
/
2012
The roles of paddy fields are re-evaluated as an artificial wetland. Although 44% of total aquatic invertebrates in South Korea are observed in a rice paddy, information of their distribution and characteristics of habitat use is limited yet. This study was carried out to provide information and characterizing distribution of community of aquatic invertebrates using a rice paddy through the South Korea. Aquatic invertebrates were collected at 284 sites of a rice paddy in South Korea from June to August, 2005, 2006 and 2007. We grouped sampling sites according to its species and population of aquatic invertebrates using a non-metric multidimensional scaling (NMDS). Total 21 orders 60 families 114 species were collected from a rice paddy. Coleoptera (25%), Heteroptera (17%), Diptera (17%) and Odonata (12%) were observed. Aquatic invertebrates were classified into three groups (Group 1: Gangwon, Gyeonggi and Chungbuk; Group 2: Chungnam, Jeonbuk, Jeonnam and Jeju; Group 3: Gyeongbuk and Kyeongnam). In Group 1, Muljarus japonicas distributed mainly Gangwondo and Chungbuk. In Group 2, Sigara nigroventralis and S. substriata were mainly observed. In Group 3, higher density of Daphnia sp. and Chironomidae gen. spp. was found in the southern part of Korea.
In order to evaluate the residual effects of bituminous coal fly ash, gypsum, oyster shell as soil amendments, Chinese cabbage was cultivated on acidic sandy loam soils with low boron content. The soils were amended in the upper 15cm with amendments in previous year and the growth and qualities of plants were analyzed. Amendments treated one year before were, in metric tons per hectare, i) none(Check) ; ii) 80 fly ash(FA) ; iii) 4 shell(SH) ; iv) 56 fly ash + 24 gypsum (FG) ; v) 40 fly ash + 24 gypsum + 0.8 shell(FGS). Yield response in fresh weight of Chinese cabbage was in order of 834% for FGS > 780% for FG > 755% FA > 193% for SH plants. Reducing sugar, vitamin-C, and total nitrogen contents of leaves depending on treatments showed the same tendencies as that in yields, whereas crude fibre opposite to them. In particular, FA, FG, and FGS plants showed normal growth without both boron deficiency symptoms which appeared in Check and SH plants and possibilities of accumulation of heavy metals. In any soils treated with the above amendments, however, magnesium was insufficient.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.35
no.1
/
pp.1-10
/
1999
The north-west sea area of Cheju Island is where originate two layer current in the summer season. The case of the fishing operations in this sea area is almost impossible for normal expansion of the net gear for shooting net, and is happened to be frequent occasions for rise of tension suddenly in purseline by changes of the net shapes in the operation. Therefore, the safety of the operations is often obstructed by the above mentioned. In connection with the above, model experiments on the purse seine in the circulating water tank was carried out in comparison and analysis on the changes of tension in the pruseline by deformation of purse seine in the sea area of two layer current. THe results obtained are as follows;In the case of the required time for pursing of 20 minutes in the no current set, the increasing curve for tension of purseline can be expressed as:Y=0.0004x3+0.0098x2+0.3000x(r=0.9989)where Y is tension(metric tons) of a purseline, x is required time(minutes) for pursing. And, the maximum value of tension in this time was an increase of 31.3 percent at 15 minutes, and was a decrease of 30.3 percent at 30 minutes than that of 20 minutes.When the bottom margin of net is held on the position in velocity of 0.5 knot at three-eighths of net in the bottom current to the net height, the maximum tension of the required time for pursing of 30 minutes in tight set and loose set were decrease of 29.5 percent and 28.7 percent respectively than that of 20 minutes.The work load during the required time for pursing of 20 minutes were calculated 5.79×106 kgf·m in no current set, 7.89×106 kgf·m in tight set and 5.15×106 kgf·m in loose set, therefore it was an increase of 22.3 percent in tight set, and was a decrease of 11.1 percent in loose set than that of the no current set. Where tight set and loose set is a range of the bottom current with velocity of 0.5 knot at three-eighths of net to the net height.
We investigated the effects of feeding rate on the growth performance, blood components, and histology of growing olive flounder Paralichthys olivaceus. Optimum feeding rate (initial fish mean weight : $316.7{\pm}6.18g$) was determined under the optimum water temperature. Two replicated groups of fish were fed a commercial diet at rates of 0%, 0.4%, 0.6%, and 0.8% of body weight (BW) per day, and to satiation. Feeding trial was conducted using a flow-through system with 10 1.2-metric ton aquaria receiving filtered seawater at $21-24^{\circ}C$ for 3 weeks. Weight gain (WG) and specific growth rate (SGR) were significantly higher in fish fed to satiation (1.0% BW/day) than in those in other treatments. These parameters were negative and significantly lower in the starved fish than in fish fed the experimental diet at all feeding rates. There were no significant differences in WG and SGR among fish fed at 0.4%, 0.6%, and 0.8% BW/day. Hematocrit and hemoglobin in fish fed to satiation were significantly lower than those in other treatments. Histological changes of fish fed at 0.6% BW/day indicated that this group was in the best condition; differences were not found in tissues of fish fed at 0%, 0.6% and 1.0% BW/day. Broken-line regression analysis of weight gain showed that the optimum feeding rate of olive flounder weighing 317 g was 0.99% BW per day at the optimum water temperature.
The problems to compute the distances or similarities of multiple strings have been vigorously studied in such diverse fields as pattern matching, web searching, bioinformatics, computer security, etc. One well-known method to compare multiple strings in the given set is finding a consensus string which is a representative of the given set. There are two objective functions that are frequently used to find a consensus string, one is the radius and the other is the consensus error. The radius of a string x with respect to a set S of strings is the smallest number r such that the distance between the string x and each string in S is at most r. A consensus string based on radius is a string that minimizes the radius with respect to a given set. The consensus error of a string with respect to a given set S is the sum of the distances between x and all the strings in S. A consensus string of S based on consensus error is a string that minimizes the consensus error with respect to S. In this paper, we show that the problem of finding a consensus string based on radius is NP-complete when the distance function is a metric.
Mobile Internet Device (MID) allows users to flexibly use various forms of wireless internet such as Wi-Fi, GSM, CDMA, and 3G. Using such Internet, MID users can utilize application services. MID usage is expected to grow due to the benefits of portability, Internet accessibility, and other convenience. However, it has resource constraints such as limited CPU power, small memory size, limited battery life, and small screen size. Consequently, MIDs are not capable to hold large-sized complex applications and to process a large amount of data in memory. An effective solution to remedy these limitations is to develop cloud services for the required application functionality, to deploy them on the server side, and to let MID users access the services through internet. A major concern on running cloud services for MIDs is the potential problems with low Quality of Service (QoS) due to the characteristics of MIDs. Even measuring the QoS of such services is more technically challenging than conventional quality measurements. In this paper, we first identify the characteristics of MIDs and cloud services for MIDs. Based on these observations, we derive a number of quality attributes and their metrics for measuring QoS of mobile services. A case study of applying the proposed quality model is presented to show its effectiveness and applicability.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.