• 한국진공학회지
• /
• 제9권4호
• /
• pp.394-399
• /
• 2000

Underlayer의 종류 및 두께가 Al 박막의 texture 및 면저항 변화에 미치는 영향을 연구하였다. Al의 underlayer로는 ionized physical vapor deposition(I-PVD)에 의해 제조된 Ti와 I-PVD Ti 위에 metalorganic chemical vapor deposition(MOCVD)에 의해 제조된 TiN을 적층한 구조가 사용되었으며, 각각에 대해 두께를 변화시키면서 Al 박막의 배향성, 면저항을 조사하고, $400^{\circ}C$, $N_2$분리기에서 열처리하면서 면저항의 변화를 조사하였다. I-PVD Ti만을 Al의 underlayer로 사용한 경우, Ti두께가 5 nm이어도 Al 박막이 우수한 <111> 배향성을 나타내었으나, Al-Ti반응 때문에 열처리 후 Al 배선의 면저항이 크게 상승하였다. I-PVD 와 Al 사이에 MOCVD TiN을 적용함에 의해 Al <111> 배향성의 큰 저하없이 Al-Ti 반응에 의한 면저항의 증가를 억제할 수 있었으며, MOCVD TiN의 두께가 4 nm 이하일 때 특히 우수한 Al <111> 배향성을 나타내었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1999년도 춘계학술발표강연 및 눈문개요집
• /
• pp.102-102
• /
• 1999

• 한국진공학회지
• /
• 제14권4호
• /
• pp.222-228
• /
• 2005

2단계 성장법으로 c-plane 사파이어 단결정 기판 위에 metalorganic chemical vapor deposition(MOCVD)법으로 undoped GaN 에피층을 성장시켰다. 고온 성장시 성장 온도 변화가 undoped GaN 에피층의 표면형상과 거칠기, 구조적 결정성, 광학적 성질, 전기적 성질에 미치는 영향을 연구하였다. 수평형 MOCVD 장치를 이용해 압력 300 Torr 저압에서 성장시켰으며, 저온 핵생성층 성장조건은 $500^{\circ}C$로 고정시키고, 2단계 성장 온도를 $850\~1050^{\circ}C$범위로 변화시켰다. 형성된 undoped GaN 에피층을 원자력현미경, 고분해능 X-선회절장치, 광발광측정, 홀 효과 측정 장치 등을 이용하여 분석, 고찰하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.73-78
• /
• 2003

The InP thin films grown by metalorganic chemical vapor deposition (MOCVD) are widely used to optoelectronic devices such as laser diodes, wave-guides and optical modulators. Effects of various parameters controlling film growth rate such as gas-phase reaction rate constant, surface reaction rate constant and mass diffusivity are numerically investigated. Results show that at the upstream region where film growth rate increases with the flow direction, diffusion including thermal diffusion plays an important role. At the downstream region where the growth rate decreases with flow direction, film deposition mechanism is revealed as a mass-transport limited. Mass transport characteristics are also studied using systematic analyses.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.21-26
• /
• 2002

Textured CeO2 buffer layers for YBCO coated conductors were deposited on biaxially textured Ni substrate by metalorganic chemical vapor deposition (MOCVD). The degree of texture of deposited $CeO_2$ films was strong1y dependent on the deposition temperature (Td) and oxygen Partial Pressure(PO2). ($\ell$00) textured $CeO_2$ films were well deposited at T=500~52$0^{\circ}C$. PO2=0.90~3.33 Torr. The surface morphology showed that the films consisted of columnar CeO2 films grown from the Ni substrates. The root mean square roughness of CeO$_2$ films estimated by atomic force microscopy(AFM) increased as the deposition temperature(Td) increa- sed. The growth rate of the $CeO_2$ films deposited at T=52$0^{\circ}C$ and PO2=2.30 Torr was 150~200 nm/min that was much faster than that of other Physical deposition methods.

• Transactions on Electrical and Electronic Materials
• /
• 제6권1호
• /
• pp.14-17
• /
• 2005

The SrRuO_{3}$ films for application of the bottom electrode were deposited on p-Si (001) substrates by metalorganic chemical vapor deposition (MOCVD). The films are characterized by various deposition parameters. The optimum deposition condition for SRO films is the deposition temperature of $500{\circ}C$, Sr/Ru input mol ratio of 1.0, and a flow rate of precursors of 15 ml/h. The films deposited by an optimum condition exhibited a single phase of SrRuO_{3}$, an rms roughness of 8 nm, and a resistivity of approximately $900{\mu}{\Omega}{\cdot}cm$. The high resistivity of the films for application of a bottom electrode should be improved through a characterization of an interface.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 추계학술발표회
• /
• pp.129-129
• /
• 1997

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.214-219
• /
• 2002

In order to elucidate the crystallographic orientation dependence of electrical properties of carbon (C)-doped GaAs epilayers, C incorporation into GaAs epilayers on high-index GaAs substrates with various crystallographic orientations from (100) to (111)A has been performed by a low pressure metalorganic chemical vapor deposition using C tetrabromide ($CBt_4$) as a C source. The hole concentration of C-doped GaAs epilayers rapidly decreases with a hump at (311)A with increasing the offset angle. Although the growth temperature and the V/III ratio are varied, the crystallographic orientation dependence of hole concentration show a same trend. The above behaviors indicate that the bonding strength of As sites on a glowing surface plays an important role in the C incorporation into the high-index GaAs substrates.

• 한국전기전자재료학회논문지
• /
• 제18권6호
• /
• pp.527-531
• /
• 2005

Fully coherent self-assembled InAs quantum dots(QDs) grown on Si (100) substrates by atmospheric pressure metalorganic chemical vapor deposition(APMOCVD) were grown and the effect of growth conditions such as growth rate and growth time on quantum dots' morphology such as densities and sizes was investigated. InAs QDs of 30 - 80 nm in diameters with densities in the range of (0.6 - 1.7) x $10^{10}\;cm^{-2}$ were achieved on Si substrates and InAs layer was changed from 2 dimensional growth to 3 dimensional one at a nominal thickness less than 0.48 ML. This is attributed to the higher ambient pressure of APMOCVD suppressing of In segregation from the 2 dimensional InAs layer. This In segregation looked to disturb the dot formation especially when the growth rate was low so that the dots became less dense and bigger as the growth rate was lower.

• 반도체디스플레이기술학회지
• /
• 제4권4호
• /
• pp.9-12
• /
• 2005

Characteristics of ZnO films grown on $Si-SiO_2$ substrates at temperatures of $200\sim400^{\circ}C$ by metalorganic chemical vapor deposition were investigated. The growth rates and mobilities of ZnO films were dependent on growth temperatures. The field-effect mobilities measured in thin-film transistor structure were $15cm^2/Vsec$.