• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1659-1664
• /
• 2014

A porous metal-organic framework (MOF), MIL-101, was synthesized in the presence of sulfated zirconia (SZ) to produce acidic SZ/MIL-101 composites for the first time. The composites were characterized with XRD, nitrogen adsorption, FT-IR, scanning electron microscope, chemical analysis and so on. The composites (SZ/MIL-101s) were successfully applied in a liquid-phase esterification for a high yield of ester. This catalytic result of SZ/MIL-101, compared with that of pure SZ or MIL-101 (showing a negligible yield of ester), suggests that the SZ in the composite is highly active in the acid catalysis probably because of the well-dispersed active species of SZ. Moreover, the esterification is catalyzed in heterogeneous mode as confirmed by negligible esterification after filtration of the catalyst. Finally, microwaves can be efficiently applied both in the synthesis of the composites and the esterification reaction to accelerate the two processes of synthesis and esterification by about 5 times.

• Journal of Sensor Science and Technology
• /
• 제26권6호
• /
• pp.379-385
• /
• 2017

In this study, an amperometric non-enzymatic glucose sensor was developed on the surface of a glassy carbon electrode by simply drop-casting the synthesized homogeneous suspension of hexagonal boron nitride (h-BN) nanosheets with a copper metal-organic framework (Cu-MOF) composite. Comprehensive analytical methods, including field-emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), cyclic voltammetry, electrochemical impedance spectroscopy, and amperometry, were used to investigate the surface and electrochemical characteristics of the h-BN-Cu-MOF composite. The FE-SEM, FT-IR, and XRD results showed that the h-BN-Cu-MOF composite was formed successfully and exhibited a good porous structure. The electrochemical results showed a sensor sensitivity of $18.1{\mu}A{\mu}M^{-1}cm^{-2}$ with a dynamic linearity range of $10-900{\mu}M$ glucose and a detection limit of $5.5{\mu}M$ glucose with a rapid turnaround time (less than 2 min). Additionally, the developed sensor exhibited satisfactory anti-interference ability against dopamine, ascorbic acid, uric acid, urea, and nitrate, and thus, can be applied to the design and development of non-enzymatic glucose sensors.

• Applied Chemistry for Engineering
• /
• 제16권6호
• /
• pp.857-864
• /
• 2005

Dealuminated and alkali/alkaline-earth metal exchanged Y-type and ZSM-5 zeolites were prepared as catalytic materials. Comparing with the composition of starting material, the magnitude of Si/Al ratio was increased after dealumination and cation exchange process. The ratio of Si/Al on surface was appeared to be larger than that in bulk. The destruction of basic frame in catalysts observed was understood to be due to a detachment of aluminum, which results in reducing framework while increasing non-framework. This phenomenon becomes more serious with increasing time of steam treatment and even more significant for the cation exchanged catalysts. The desorption peaks of the NO-TPD profiles taken after dealumination and cation exchanged Y-type and ZSM-5 zeolites shifted to the low temperature region. It was also found that the longer the steam treatment time, the degree of shift toward low temperature region was increased. The catalytic activities are dependent on the nature of cation exchanged, the ratio of Si/Al and the ratio of framework/non-framework by a change in basic frame.

• Applied Chemistry for Engineering
• /
• 제31권3호
• /
• pp.258-266
• /
• 2020

The chemical fixation of CO₂ into cyclic carbonates is considered to be one of the most promising way to alleviate global warming and produce fine chemicals. In this work, the catalytic applicability of metal-organic frameworks (MOFs) as porous crystalline materials for the synthesis of five-membered cyclic carbonate from CO₂ and epoxides was reviewed. In addition, we have briefly classified the materials based on their different structural features and compositions. The studies revealed that MOFs exhibited good catalytic performance towards cyclic carbonate synthesis because of the synergistic effect between the acid sites of MOFs and nucleophile. Moreover, the effect of structure of designed MOFs and mechanism for the cycloaddition of CO₂ were suggested.

• Bulletin of the Korean Chemical Society
• /
• 제30권12호
• /
• pp.2921-2926
• /
• 2009

Cu-BTC[$Cu_3(BTC)_2(H_2O)_3$, BTC = 1,3,5-benzenetricarboxylate], one of the most well-known metal-organic framework materials (MOF), has been synthesized under atmospheric pressure and room temperature by using ultrasound. The Cu-BTC can be obtained in 1 min in the presence of DMF (N,N-dimethylformamide), suggesting the possibility of continuous production of Cu-BTC. Moreover, the surface area and pore volume show that the concentration of DMF is important for the synthesis of Cu-BTC having high porosity. The morphology and phase also depend on the concentration of DMF : Cu-BTC cannot be obtained at room temperature in the absence of DMF and aggregated Cu-BTC (with low surface area) is produced in the presence of high concentration of DMF. It seems that the deprotonation of benzenetricarboxylic acid by base (such as DMF) is inevitable for the room temperature syntheses.

• Journal of Sensor Science and Technology
• /
• 제29권6호
• /
• pp.374-381
• /
• 2020

Hydrogen gas has attracted considerable attention as a promising candidate for future energy resources because of its eco-friendly characteristics; however, its highly combustible characteristics should be thoroughly examined to preclude potential disasters. In this regard, a highly sensitive method for the selective detection of H₂ is extremely important. To achieve excellent H₂ selectivity, the utilization of a metal-organic framework (MOF) membrane can physically screen interfering gas molecules by restricting the size of kinetic diameters that can penetrate its nanopores. This paper summarizes the various endeavors of researchers to utilize the MOF molecular sieving layer for the development of highly selective H₂ sensors. Further, the review affords useful insights into the development of highly reliable H₂ sensors.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.9-12
• /
• 2006

We performed molecular dynamics simulations on the conventional MOF, IRMOF-14 and the catenated MOF with two MOF chains, IRMOF13, to find out rational design and synthetic strategies toward efficient hydrogen storage materials. The molecular dynamics calculations were done using Universal force fields and the analysis of result was performed during the NVE dynamics after preliminary NVT dynamics at 77K. The results showed the density of adsorbed hydrogen molecules was increased in the various pores created by catenation of MOFs while the large amount of volume in conventional MOF was not effectively utilized to store hydrogen. Those calculation results commonly showed the proper control of pore si Be for hydrogen storage into MOF by catenation would be one of the efficient ways to increase hydrogen capacity of MOFs.

• Applied Chemistry for Engineering
• /
• 제31권6호
• /
• pp.591-595
• /
• 2020

Intensive pulsed light (IPL) technique enables energy to be transferred to a target substance in a short time per millisecond at room temperature under an ambient atmosphere. Due to the growing interest in flashlights with excellent functionality among various technologies, light-sintering research on metal particles using IPL has been carried out representatively. Recently, examples of the application of IPL to various material synthesis have been reported. In the present article, various strategies using IPL including the manufacture of flexible electrodes and the synthesis of metal-organic frameworks were discussed. In particular, the process of improving oxidation resistance and electrical conductivity of electrodes, and also the metal-organic framework synthesis from metal surface were explained in detail. We envision that the review article can be of great help to researchers who investigate electrode manufacturing and material synthesis using IPL.

• The Journal of Korean Academy of Prosthodontics
• /
• 제56권1호
• /
• pp.17-24
• /
• 2018

Lost wax technique of casting wax patterns has been used principally to make metal frameworks of removable partial dentures. Since the development of digital technology and CAD, metal frameworks can be built through digital surveying and framework designing. Many cases proved that resin patterns made by CAD printing method were well adapted to internal oral structure and final metal frameworks also showed good internal adaptation as well. The metal frameworks of a removable partial denture were made by both lost wax technique and CAD technique and were applied to a patient with severe alveolar bone loss. Using CAD data and fit checker, internal adaptation of both metal frameworks were evaluated by comparing the gap between surveyed crown and its structure. This study is to prove that metal frameworks by both techniques showed adaptation that can be applied in clinical field.

• Carbon letters
• /
• 제4권1호
• /
• pp.1-9
• /
• 2003

Recently, the control of pore-characteristics of nano-porous materials has been studied extensively because of their unique applications, which includes size-selective separation, gas adsorption/storage, heterogeneous catalysis, etc. The most widely adopted techniques for controlling pore characteristics include the utilization of pillar effect by metal oxide and of templates such as zeolites. More recently, coordination polymers constructed by transition metal ions and bridging organic ligands have afforded new types of nano-porous materials, porous metal-organic framework(porous MOF), with high degree and uniformity of porosity. The pore characteristics of these porous MOFs can be designed by controlling the coordination number and geometry of selected metal, e.g transition metal and rare-earth metal, and the size, rigidity, and coordination site of ligand. The synthesis of porous MOF by the assembly of metal ions with di-, tri-, and poly-topic N-bound organic linkers such as 4,4'-bipyridine(BPY) or multidentate linkers such as carboxylates, which allow for the formation of more rigid frameworks due to their ability to aggregate metal ions into M-O-C cluster, have been reported. Other porous MOF from co-ligand system or the ligand with both C-O and C-N type linkage can afford to control the shape and size of pores. Furthermore, for the rigidity and thermal stability of porous MOF, ring-type ligand such as porphyrin derivatives and ligands with ability of secondary bonding such as hydrogen and ionic bonding have been studied.