• Journal of Environmental Science International
• /
• v.12 no.6
• /
• pp.665-676
• /
• 2003

To investigate the chemical characteristics of PM$\_$2.5/ in Seoul, Korea, atmospheric particulate matters were collected using a PM$\_$10/ dichotomous sampler including PM$\_$10/ and PM$\_$2.5/ inlet during the period of October 2000 to September 2001. The Inductively Coupled Plasma-Mass Spectromety (ICP-MS), ion Chromatography (IC) methods were used to determine the concentration of both metal and ionic species. A statistical analysis was performed for the heavy metals data set using a principal component analysis (PCA) to derived important factors inherent in the interactions among the variables. The mean concentrations of ambient PM$\_$2.5/ and PM/sub10/ were 24.47 and 45.27 $\mu\textrm{g}$/㎥, respectively. PM$\_$2.5/ masses also showed temporal variations both yearly and seasonally. The ratios of PM$\_$2.5/PM$\_$10/ was 0.54, which similar to the value of 0.60 in North America. Soil-related chemical components (such as Al, Ca, Fe, Si, and Mn) were abundant in PM$\_$10/, while anthropogenic components (such as As, Cd, Cr, V, Zn and Pb) were abundant in PM2s. Total water soluble ions constituted 30∼50 % of PM$\_$2.5/ mass, and sulfate, nitrate and ammonium were main components in water soluble ions. Reactive farms of NH$_4$$\^$+/were considered as NH$_4$NO$_3$ and (NH$_4$)$_2$SO$_4$ during the sampling periods. In the results of PCA for PM$\_$2.5/, we identified three principal components. Major contribution to PM$\_$2.5/ seemed to be soil, oil combustion, unidentified source. Further study, the detailed interpretation of these data will need efforts in order to identify emission sources.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.145-152
• /
• 2006

The purpose of this study was to evaluate electroless plating as a method of increasing the diameter of an orthodontic wire in comparison with eletroplating. After pretreatment plating of the 0.016 inch stainless steel orthodontic wire, electroless plating was performed at $90^{\circ}C$ until the diameter of the wire was increased to 0.018 inch. During the process of electroless plating, the diameter of the wire was measured every 5 minutes to examine the increasing ratio of the wire's diameter per time unit. And to examine the uniformity, the diameter at 3 points on the electroless-plated orthodontic wire was measured. An X-ray diffraction test for analyzing the nature of the plated metal and a 3-point bending test for analyzing the physical property were performed. The electroless-plated wire group showed a increased tendency for stiffness, yield strength, and ultimate strength than the electroplated wire group. And there was a statistically significant difference between the two groups for stiffness and ultimate strength. In the electroless-plated wire group, the increasing ratio of the diameter was $0.00461{\pm}0.00003mm/5min$ (0.00092 mm/min). In the electroplated wire group, it was $0.00821{\pm}0.00015mm/min$. The results of the uniformity test showed a tendency for uniformity in both the plating methods. The results of this study suggest that electroless plating of the wire is closer to the ready-made wire than electroplating wire in terms of the physical property. However, the length of plating time needs further consideration for the clinical application of electroless plating.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.252-257
• /
• 2001

To get the basic information for the water quality improvement and control of water resource at Mankyeong river stream, the water quality in four site of main stream and three site of branch stream at the upper stream were investigated mainly from February to August in 2000. The water temperature was affected by depth, flow rate of the water, and air temperature, and ranged 6.4 to $30.8^{\circ}C$. The pH, DO and BOD values of the water was $5.9{\sim}9.7$, $4.6{\sim}14.50\;mg/L$, and $0.1{\sim}11.8\;mg/L$ range, respectively. The content of total nitrogen, $NO_3-N$ and $NH_4-N$ was $1.19{\sim}10.61\;mg/L$, $1.00{\sim}5.93\;mg/L$, and ND $(non\;detected){\sim}2.79$ mg/L, respectively. The concentration of total phosphorus was ND to 1.14 mg/L. The concentration of Cl ion was $3.5{\sim}196.4\;mg/L$. The content of Fe and Mn was $0.002{\sim}0.100\;mg/L$ and $ND{\sim}0.04\;mg/L$, respectively. The contents of heavy metal Cd, Cu, and Zn were $ND{\sim}0.03\;mg/L$, $ND{\sim}0.05\;mg/L$, and $0.001{\sim}0.17\;mg/L$, respectively. Pb was not detected in all the samples. The pH, total nitrogen contents, and total phosphorus content were frequently exceeded the water quality standard for agriculture. The degree of water pollution was very varied by the sampling place. The water quality was generally polluted in the dry season more than in rainy season. The highest level of water pollution observed in the area of Samyea Bridge among the 7 sites.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.272-279
• /
• 2011

Copper cyanide is a chemical produced in large quantities with 2,500 tonnes being produced in 2006. It is mainly used for electroplating copper, particularly alkali-Cu plate and brass plating. The purpose of this study is to reassess the physicochemical properties and environmental fate of copper cyanide based on reliable data and and to conduct an ecotoxicity test according to the OECD test guidelines as an initial environmental risk assessment (need to state where this was done). Metal containing inorganic substances are not subject to degradation, biodegradation or hydrolysis. Aquatic toxicity tests of copper cyanide were conducted according to OECD test guideline 201, 202 and 203 for green algae, daphnia, and fish, respectively. The following acute toxicity test results were obtained for aquatic species: 0.089 mg $L^{-1}$ (Algae, 72 Hr-$EC_{50}$); 0.21 mg $L^{-1}$ (flea, 48 Hr-$LC_{50}$); 0.62 mg $L^{-1}$ (Fish, 96 Hr-$ErC_{50}$). The chemical possesses properties indicating a hazard for the aquatic environment (acute toxicity in fish, daphnia and algae below 1.0 mg $L^{-1}$). As a result of this study, copper cyanide has become a candidate for detailed risk assessment. Countries that produce this chemical in significant quantities are recommended to perform specific assessments.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.209-216
• /
• 2007

The present study investigated anti-oxidative and anti-inflammatory activity of glycoprotein isolated from Morus Indica Linne (MIL glycoprotein). We found that MIL glycoprotein has a molecular weight of 32 kD and consists of carbohydrate (40.03%) and protein (59.97%), and that it has a strong scavenging activity against 1,1-diphenyl-2-picrylhydrazyl (DPPH), hydroxyl radical $({\cdot}OH)$, and superoxide anion $(O_2{\cdot}\;^-)$ radicals. In addition, MIL glycoprotein had a stable character and an optimal DPPH radical scavenging activity in the alkaline and neutral pH solution, and up to at 105. However, the results indicated that it has a minimal scavenging activity in the metal ionic solution ($Ca^{2+}$, $Mn^{2+}$, and $Mg^{2+}$) in the presence of EDTA. In addition, we further investigated whether MIL glycoprotein scavenges oxygen radicals and blocks inflammation-related signals in the bisphenol A (BPA)-stimulated Raw 264.7 cells. The results in this study showed that it has a character to scavenge the productions of reactive oxygen species (ROS) and nitric oxide (NO) dose-dependently. Also it blocked the activities of inflammation-related signals such as nuclear factor-kappa B ($NF-{\kappa}B$) and inducible nitric oxide synthase (iNOS). For example, it had an inhibitory effect on the activation of $NF-{\kappa}B$ (p50) and iNOS proteins at 200 ${\mu}g/mL$ MIL glycoprotein. Here, we speculate that MIL glycoprotein is one of natural antioxidants and of modulators of the BPA-induced inflammation.

• Korean Journal of Poultry Science
• /
• v.36 no.4
• /
• pp.337-342
• /
• 2009

This work was conducted to investigate the manure excreta and chemical compositions of layers. Two hundred 1-d-old ISA Brown layers were used in this work, and ten of 200 layers were selected for measurement of manure excreta with feeding phase. Means of the manure excreta per bird, the moisture content of poultry, and the dried manure were $124.7\;{\pm}\;27.5\;g$/bird/day, $76.9\;{\pm}\;1.9%$, and $29.1\;{\pm}\;3.9\;g$/bird/day, respectively. N, $P_2O_5$, and $K_2O$ of manure (55 weeks) were $1.39\;{\pm}\;0.139$, $0.62\;{\pm}\;0.11$ and $0.68\;{\pm}\;0.09%$, respectively. pH, $BOD_5$, $COD_{Mn}$, and suspended solids (SS) were $8.19\;{\pm}\;0.71$, $50,266\;{\pm}\;621\;mg/L$, $62,832\;{\pm}\;803\;mg/L$, and $121,725\;{\pm}\;16,165\;mg/L$, respectively. Heavy metal contents in the manure were $0.003\;{\pm}\;0.0013\;ppm$ for Hg and $0.008\;{\pm}\;0.0012\;ppm$ for Pb, the latter of which was highly low compared with the standard (150 ppm), but no Cd was detected. The results of this work show the average excretion amounts and chemical compositions of layer's manure, which is used as an organic fertilizer.

• Journal of Food Hygiene and Safety
• /
• v.15 no.3
• /
• pp.209-218
• /
• 2000

This study was conducted to determine the content of trace metals in crops cultivated in Han-riverside, Anyang stream, Tan stream, and Jungryang stream. Trace metals (Pb, Cr, Cd, Fe, Zn, Cu, Hg) were detected in 36 crops, 285 samples by Atomic Absorption Spectrophotometer and Mercury Analyzer. The average concentration of trace metals in crop samples was in the order of Fe (34.592 ppm)>Mn (11.071 ppm)$\geq$Zn(8.853 ppm)>Cu(1.795 ppm)>Cr(0.237 ppm)>Pb(0.100 ppm)>Cd(0.011 ppm)>Hg(0.003 ppm). In crop samples, the contents of Fe, Cu, Mn, and Zn, which ranges were 0.004-203.083 ppm, 0.017~22.727 ppm, 0.000~74.373 ppm, 0.080~37.166 ppm, respectively, were relatively higher than those of Pb, Cd, Cr, and Hg, which ranges were 0.000~0.654 ppm, 0.000~0.270 ppm, 0.000~l.229 ppm, 0.000~0.037 ppm, respectively. The concentration of trace metals in crop samples was in the order of leafy vegetables > stem vegetables > root vegetables > fruity vegetables. In the root vegetables, such as radish, the content of Pb was leaf(0.055 ppm)>root(0.035 ppm), that of Cr, leaf (0.118 ppm)>root(0.031 ppm), that of Cd, leaf(0.004 ppm)>root(0.001 ppm), that of Hg, leaf(0.004 ppm)>root(0.001 ppm). As the results, it could be thought that root is the organ which doesn't accumulate the heavy metal ions, but absorb them.

• Korean Journal of Food Science and Technology
• /
• v.43 no.2
• /
• pp.230-234
• /
• 2011

According to the Codex committee, the maximum allowable level for lead in fruits is 0.1 mg/kg. This survey was conducted as a surveillance program following the establishment of safety guideline for fruits in Korea. Concentrations of lead (Pb), cadmium (Cd), arsenic (As) and mercury (Hg) were measured in 927 samples using a ICP-MS and a mercury analyzer. The recoveries of microwave digestion method were 86.0-110.4% for Pb, 81.0-104.0% for Cd and 82.0-104.7% for As by standard addition method. The recovery of direct mercury analyzer was 106.5% for Hg. The average levels of Pb in ${\mu}g/kg$ were $10.0{\pm}12.8$ for apple, $8.8{\pm}10.9$ for pear, $4.1{\pm}4.4$ for persimmons, $14.9{\pm}12.3$ for mandarin, $7.1{\pm}6.5$ for orange, $3.1{\pm}3.3$ for banana, $8.8{\pm}8.9$ for kiwi, and $9.3{\pm}9.7$ for mango. The average levels of Cd in ${\mu}g/kg$ were $0.4{\pm}0.3$ for apple, $2.0{\pm}1.6$ for pear, $0.3{\pm}0.3$ for persimmon, $0.1{\pm}0.1$ for mandarin, $0.1{\pm}0.1$ for orange, $1.3{\pm}1.8$ for banana, $0.5{\pm}0.5$ for kiwi, and $0.7{\pm}0.6$ for mango. The average levels of As in ${\mu}g/kg$ were $2.0{\pm}2.1$ for apple, $1.2{\pm}1.3$ for pear, $1.5{\pm}1.2$ for persimmon, $0.8{\pm}0.3$ for mandarin, $1.5{\pm}0.5$ for orange, $1.8{\pm}1.2$ for banana, $1.6{\pm}1.5$ for kiwi, and $1.2{\pm}1.5$ for mango. The average levels of Hg in ${\mu}g/kg$ were $0.5{\pm}0.4$ for apple, $0.3{\pm}0.2$ for pear, $0.2{\pm}0.1$ for persimmon, $0.2{\pm}0.1$ for mandarin, $0.2{\pm}0.1$ for orange, $0.2{\pm}0.0$ for banana, $0.2{\pm}0.2$ for kiwi, and $0.6{\pm}0.2$ for mango. Based on the Korean public nutrition report 2005, these levels (or amounts) are calculated only at 0.17% for Pb, 0.013% for Cd and 0.006% for Hg of those presented in provisional tolerable weekly Intake (PTWI) which has been established by FAO/WHO. Therefore, the levels presented here are presumed to be adequately safe.

• Clinics in Shoulder and Elbow
• /
• v.10 no.1
• /
• pp.112-123
• /
• 2007

Purpose: Evaluate the clinical results of humerus neck nonunion treated with Polarus intramedullary nail. Materials and Methods: 8 patients who underwent surgery for nonunion of humerus surgical neck fracture were included. All patients were female, the average age was 65 years. 5 out the total 8 cases initially received surgery, open reduction and internal fixation with metal plate in 1 case, Ender nail insertion in 2 cases, external fixator in 1 case and closed reduction and percutaneous pinning in 1 case. The other 3 non union cases initial received conservative managemnent. The average period of nonunion was 9 months in the operated group and 6.2 months in the conservative group. All 8 cases received closed reduction with intrameedullary Polarus nail and auto iliac bone graft. Union was confirmed radiologically, and functional evaluation was done with the UCLA functional criteria. Results: All 8 cases showed union on radiologic evaluation. Average time to union was 3.5 months, average follow up period was 27 months. Average UCLA shoulder evaluation score was 7.6 points preoperatively which improved to 26.3 points after surgery. Active shoulder flexion was 40.7 degrees preoperatiely which increased to 104 degrees after surgery. Shoulder abduction improved from 32.9 degrees preoperatively to 96.3 degrees after surgery. UCLA functional criteria was good in 5 cases and fair in 3 cases, which no poor cases. Conclusion: Polarus IM nailing and AIBG is a useful method for treating nonunion of humerus neck fracture with improvement in union and function.