• 한국재료학회지
• /
• 제27권2호
• /
• pp.100-106
• /
• 2017

Nanosized and aggregated $Y_2O_3:Eu$ Red phosphors were prepared by template method from metal salt impregnated into crystalline cellulose. The particle size and photoluminescent property of $Y_2O_3:Eu$ red phosphors were controlled by variation of the calcination temperature and time. Dispersed nanosol was also obtained from the aggregated $Y_2O_3:Eu$ Red phosphor under bead mill wet process. The dispersion property of the $Y_2O_3:Eu$ nanosol was optimized by controlling the bead size, bead content ratio and milling time. The median particle size ($D_{50}$) of $Y_2O_3:Eu$ nanosol was found to be around 100 nm, and to be below 90 nm after centrifuging. In spite of the low photoluminescent properties of $Y_2O_3:Eu$ nanosol, it was observed that the photoluminescent property recovered after re-calcination. The dispersion and photoluminescent properties of $Y_2O_3:Eu$ nanosol were investigated using a particle size analyzer, FE-SEM, and a fluorescence spectrometer.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.534-543
• /
• 2017

$Gd_2O_3:Eu^{3+}$ red phosphors were prepared by template method from crystalline cellulose impregnated by metal salt. The crystallite size and photoluminescence(PL) property of $Gd_2O_3:Eu^{3+}$ red phosphors were controlled by varying the calcination temperature and $Eu^{3+}$ mol ratio. The nano dispersion of $Gd_2O_3:Eu^{3+}$ was also conducted with a bead mill wet process. Dependent on the time of bead milling, $Gd_2O_3:Eu^{3+}$ nanosol of around 100 nm (median particle size : $D_{50}$) was produced. As the bead milling process proceeded, the luminescent efficiency decreased due to the low crystallinity of the $Gd_2O_3:Eu^{3+}$ nanoparticles. In spite of the low PL property of $Gd_2O_3:Eu^{3+}$ nanosol, it was observed that the photoluminescent property was recovered after re-calcination. In addition, in the dispersed nanosol treated at $85^{\circ}C$, a self assembly phenomenon between particles appeared, and the particles changed from spherical to rod-shaped. These results indicate that particle growth occurs due to mutual assembly of $Gd(OH)_3$ particles, which is the hydration of $Gd_2O_3$ particles, in aqueous solvent at $85^{\circ}C$.

• 통상정보연구
• /
• 제18권1호
• /
• pp.235-258
• /
• 2016

본 연구는 산업연관표를 중심으로 2011년~2013년 기간의 실측표기준의 투입산출물표(Input-output Table)를 사용하여 동 기간의 국내 해외직접투자(FDI) 유입액을 한국표준산업분류(KSIC 30부문)기준으로 재분류 및 통합하여 적용한 결과 3개년 평균 국내 외국인직접투자 유입액은 15조 3,000억원이고, 평균총생산유발액은 45조 8,000억원으로 추계되었다. 국내 외국인직접투자 유입의 특징은 감응도계수 및 영향력계수가 큰 산업인 화학제품, 전기 및 전자기기, 금속제품에 편중되어 있다. 특히 중간재로 활용되는 감응도계수가 큰 산업에 국내 외국인직접투자 유치가 이루어지면 국내 경제적 산업파급효과가 큰 것으로 나타난다.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.28-33
• /
• 2014

This paper describes the surface modification effect of a Ti substrate for improved dispersibility of the catalytic metal. Etching of a pure titanium substrate was conducted in 50% $H_2SO_4$, $50^{\circ}C$ for 1 h-12 h to observe the surface roughness as a function of the etching time. At 1 h, the grain boundaries were obvious and the crystal grains were distinguishable. The grain surface showed micro-porosities owing to the formation of micro-pits less than $1{\mu}m$ in diameter. The depths of the grain boundary and micro-pits appear to increase with etching time. After synthesizing the catalytic metal and growing the carbon nano tube (CNT) on Ti substrate with varying surface roughness, the distribution trends of the catalytic metal and grown CNT on Ti substrate are discussed from a micro-structural perspective.

• 세라미스트
• /
• 제23권2호
• /
• pp.200-210
• /
• 2020

Supported catalysts are at the heart of manufacturing essential chemical, agricultural and pharmaceutical products. While the longevity of such systems is critically hinged on the durability of metal nanoparticles, the conventional deposition/dispersion techniques are difficult to enhance the stability of the metal nanoparticles due to the lack of control over the interaction between metal-support. Regarding this matter, ex-solution has begun to be recognized as one of the most promising methodologies to develop thermally and chemically robust nanoparticles. By dissolving desired catalysts as a cation form into a parent oxide, fine and uniformly distributed metal nano-catalysts can be subsequently grown in situ under reductive heat treatment, which is referred to ex-solution. Over the several years, ex-solved analog has resulted in tremendous progress in the chemical-electrochemical applications due to the exceptional robustness coupled with ease synthesis. Herein, we describe the ex-solution process in detail which therein introducing the unique characteristics of ex-solved particles that distinguish them from conventionally dispersed nanoparticles. We then go through the history of science regarding the ex-solution phenomena and summarize several major research achievements which embrace the ex-solved nanoparticles to markedly promote the catalytic performances. In conclusion, we address the remaining challenges and the future perspectives of this rapidly growing field.

• 한국가스학회지
• /
• 제13권5호
• /
• pp.26-32
• /
• 2009

Ni 금속을 바탕으로 중형 기공성 실리카와 상용 실리카를 담체로 사용하여 메탄화 반응용 촉매를 제조, 특성 비교를 수행하였다. TPR, XRD 분석 결과, 중형 기공성 실리카에 담지된 Ni촉매는 상용 실리카에 담지된 Ni 촉매에 비하여 보다 작은 크기로 Ni 금속이 분산되었으며 보다 강한 금속-담체 상호 결합력을 가짐을 확인하였다. 이와 같은 특성으로 인하여 중형 기공성 실리카를 사용한 촉매와 상용 실리카를 사용한 촉매의 수율은 각각 65%, 58%로 중형 기공성 실리카를 사용한 촉매가 메탄화 반응에서 보다 높은 활성을 보였으며, 반응 후에 회수된 촉매의 특성 분석 결과로부터 중형 기공성 실리카를 사용한 촉매가 구조의 붕괴, 금속 소결 현상으로 인하여 촉매의 비활성화가 진행된 상용 실리카 촉매에 비하여 상대적으로 안정하다는 것을 확인하였다.

• 공업화학
• /
• 제31권6호
• /
• pp.674-678
• /
• 2020

본 연구에서는 상온 조건에서 추가적인 에너지원 없이 H2 산화가 가능한 Pd/TiO2 촉매를 제조하였고, 지지체인 TiO2의 비표면적은 Pd/TiO2 촉매의 H2 산화 반응 성능과 비례하지는 않은 것을 확인하였다. 또한 촉매의 물성 변화에 의한 성능 영향 평가를 위하여 La2O3를 Pd/TiO2 촉매에 첨가하였다. La2O3를 TiO2에 함량별로 첨가하여 Pd/La2O3-TiO2를 제조하였고, CO chemisorption 분석을 진행하였다. Pd/TiO2(G) 촉매의 전환율(14% at 0.5% H2)과 비교하여 Pd/La2O3-TiO2 촉매가 74% 전환율로 5배 이상의 성능 증진이 나타났다. Pd/La2O3-TiO2 촉매는 활성금속인 Pd의 metal dispersion이 클수록 H2 산화반응에 유리한 것으로 분석되었다. 하지만 첨가되는 La2O3가 10%를 초과하게 되면 촉매 성능이 다시 감소하는 것을 알 수 있었다. 마지막으로 Pd/La2O3-TiO2 촉매의 물성이 지배적인 영향을 미치는 것은 주입되는 H2가 0.3~0.5% 농도 조건까지이며, 1% 이상의 H2 농도부터는 물질전달이 촉매 반응속도를 지배하는 것으로 판단된다.

• 유기물자원화
• /
• 제29권4호
• /
• pp.47-54
• /
• 2021

본 연구는 수소 경제 사회에서 누출·농축 수소에 대한 안전성 확보를 위해 Pd/TiO₂ 촉매를 허니컴 형태로 코팅하여 그 성능을 평가하였다. 열원에 노출되지 않는 액상환원법을 기반으로 촉매를 제조하였으며, 2~4 nm의 매우 작은 활성입자로 존재함을 H₂-chemisorption 분석을 통해 확인하였다. 또한 환원반응온도가 증가할수록 metal dispersion 감소 및 활성입자 크기가 증가함을 확인하였으며, 활성금속 입자 크기와 수소 산화 성능은 비례관계에 있음에 따라 수소 산화 성능 감소결과와 일치함을 확인하였다. 제조된 촉매를 실 공정에 적용할 수 있도록 허니컴 형태의 지지체에 코팅하였을 때, AS-40 바인더를 20 wt%이상 코팅하였을 때 저농도 수소 조건에서 90% 이상의 산화 성능을 관찰하였다. 이는 촉매의 부착강도를 증진시키고 촉매 탈리를 방지하여 장기적인 촉매 활성을 기대할 수 있음을 SEM 분석을 통해 확인하였다. 본 연구를 통해 가스화 등과 같은 유기물 자원화를 통해 수소 생산 및 수소 인프라 구축 사회에서 안전성을 확보할 수 있는 기초연구로, 추후 예측하지 못한 안전사고를 대응할 수 있는 시스템으로써 활용될 수 있을 것으로 판단된다.

• 자원환경지질
• /
• 제9권3호
• /
• pp.143-156
• /
• 1976

The Cretaceous metal ore deposits in the Gyeongsang basin of Gyeongsangbuk-do are characterized by the formation of metallogenic provinces which show zonal distribution pattern around Yeonil province where pneumatolytic type is dominated and hydrothermal type are distributed in the order of decreasing temperature type outward. Some Cretaceous granitic rocks include zoned alkali feldspars which reflect rapid variation of $H_2O$ during emplacement and crystallization of the water-saturated granitic magma. The ore deposits are considered to be originated from upward transportation of ore solution from the excess of water exhausted from uprising magma, which seems to be intimately related to the fact that the majority of the ore deposits in Daegu area are cummulated around the granites including zoned alkali feldspars. In order to collect geochemical data necessary for geochemical exploration in the study area, certain trace elements were chosen as pathfinders from monzonite and soil in the vicinity of Dalsung Tungsten Mine by studying the dispersion patterns of trace elements: Ba and Sr show trends to decrease toward ore deposit while Cu, Pb, and Mo increase. Around mining area there are distributed apparently Equisetum arvense Linne and Mentha sachinensis Kudo which may be used as index plants. In the viewpoint of geologic structure, the trends of the ore veins in contact aureole around the Palgongsan granite body correspond with the pre- and syn- plutonism joint pattern in hornfels in the area.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제2권3호
• /
• pp.180-184
• /
• 2002

In this paper, the electrical properties of PVD Ta and $TaN_x$ gate electrodes on $SiO_2$ and their thermal stabilities are investigated. The results show that the work functions of $TaN_x$ gate electrode are modified by the amount of N, which is controlled by the flow rate of $N_2$during reactive sputtering process. The thermal stability of Ta and $TaN_x$ with RTO-grown $SiO_2$ gate dielectrics is examined by changes in equivalent oxide thickness (EOT), flat-band voltage ($V_{FB}$), and leakage current after post-metallization anneal at high temperature in $N_2$ambient. For a Ta gate electrode, the observed decrease in EOT and leakage current is due to the formation of a Ta-incorporated high-K layer during the high temperature annealing. Less change in EOT and leakage current is observed for $TaN_x$ gate electrode. It is also shown that the frequency dispersion and hysteresis of high frequency CV curves are improved significantly by a post-metallization anneal.