• 제목/요약/키워드: Metal cations

검색결과 245건 처리시간 0.031초

Synthesis and Characterization of Tetrathiafulvalene Charge Transfer Compounds with Iron and Antimony Halides

  • Kim Young In;Choi Sung Nak;Jung Woo Sung
    • Bulletin of the Korean Chemical Society
    • /
    • 제15권6호
    • /
    • pp.465-468
    • /
    • 1994
  • The charge transfer compounds $(TTF)_4FeCl_3{\cdot}CH_3OH,\;(TTF)_4SbCl_4\;and\;(TTF)_5(SbBr_4)_2{\cdot}CH_3COCH_3$ were prepared from reactions of the TTF (tetrathiafulvalene) and metal halides. The compounds were characterized by spectroscopic (UV,IR, EPR and XPS) methods, magnetic susceptibility and electrical conductivity measurements. The d.c electrical conductivities of the pressed pellets are in the order of $10^{-1}-10^{-3} Scm^{-1}$, which lies in the range of semiconductor region at room temperature. It means that the partially ionized TTF has stacked in low-dimensional chain in each compound. Spectroscopic properties also indicate that TTF molecules are partially ionized and charge transfer has occurred from (TTF)n to Fe(III) center in $(TTF)_4FeCl_3{\cdot}CH_3OH$ whereas to the $-SbX_4^-$ entity in $(TTF)_4SbCl_4\;and\;(TTF)_5(SbBr_4)_2{\cdot}CH_3COCH_3$. The EPR g values are consistent with TTF radical formation and EPR linewidths suggest the delocalization of unpaired electrons along TTF stacks. A signal arised from metal (Fe and Sb) ions were not detected in EPR spectra, indicating that metal ion is in the diamagnetic state in each compound. The diamagnetic state was also examined by the magnetic susceptibility measurement. The magnetic properties reveal the significant interaction between the $TTF^+$ radical cations in the stacks. The oxidation state of metal ions was also investigated by XPS spectra.

Fluorescence Sensing Properties of 2-(2'-Hydroxyphenyl)quinoline and Derivatives

  • Helal, Aasif;Lee, Sang-Hoon;Ren, Wen Xiu;Cho, Chan-Sik;Kim, Hong-Seok
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권5호
    • /
    • pp.1599-1603
    • /
    • 2011
  • Novel chemosensors based on 2-(2'-hydroxyphenyl)quinoline were prepared and evaluated for sensing metal cations. The photophysical properties of chemosensors 1-3 were examined and their ion-selectivity was evaluated by measuring their fluorescent emission responses to alkali, alkaline earth, and transition metal ions. Chemosensors 1, 2 and 3 show ratiometric and enhanced fluorescence changes with transitional metals that are efficient fluorescence quenchers, especially 3 has a high binding constant with $Hg^{+2}$ in $CH_3CN$.

4′-vinylbenzo-15-crown-5의 합성과 Di(ethylene glycol) ethyl ether acrylate와의 라디칼 공중합 (Synthesis of 4o-vinylbenzo-15-crown-5 and its copolymerization behavior with Di(ethylene glycol) ethyl ether acrylate)

  • Soukil Mah;Jin, Long-Yi;Kyuchan Han
    • 한국섬유공학회:학술대회논문집
    • /
    • 한국섬유공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.195-198
    • /
    • 2002
  • Poly(crown ether)s as a functional polymer materials have powerful and selective complexation properties with a large number of metal cations and have advantage of facility of their recovery and modification of their complexation properties in contrast to their monomeric analogues. Poly(crown ether)s having pendant macrocyclic groups can easily form 2:1-type crown ether ring-to-cation complexes with particular metal ions which are a little larger than the cavity of the crown ether ring. (omitted)

  • PDF

알라네이트 계 수소 저장 물질의 수소 방출 특성 (Hydrogen Evolution Properties of Alanate-based Hydrogen Storage Materials)

  • 정헌도
    • 한국수소및신에너지학회논문집
    • /
    • 제28권4호
    • /
    • pp.361-368
    • /
    • 2017
  • Alanate-based materials, which were known to have high hydrogen storage capacity, were synthesized by mechanochemically metathesis reaction of metal chloride and sodium alanate without solvent. XRD patterns of synthesized materials showed that metathesis reaction of cations between metal chloride and sodium alanate was progressed favorably without any solvent. Magnesium alanate showed that 3.2 wt.% of hydrogen was evolved by the thermal decomposition. The addition of a small amount of Ti to the magnesium alanate greatly reduced hydrogen evolution temperature. Also, Ti doped magnesium alanate had a good regeneration property. Both the calcium and lithium-magnesium alanate showed the lower starting temperature of the two step hydrogen evolution and fast kinetics for the hydrogen evolution.

황사현상시 서울지역 대기분진의 성분에 관한 연구 (A Study on the Metal Ion Components of Airborn Particulates during Yellow Sand Phenomena in Seoul)

  • 신찬기;박태술;김윤신
    • 환경위생공학
    • /
    • 제6권1호
    • /
    • pp.47-62
    • /
    • 1991
  • Yellow Sand Phenomena was observed from April 8 th to 10 th in 1990. During this period particle was collected to investigate the chacteristics of chemical composition of particulate by High Volume Air Sampler and Andersen Air Sa~npler in Seoul. During this period the particle concentration was 350 yg/$m^3$ and the anions, cations, and metal concentrations were increased and the orders of these were $S0_4\;^{-2}>N0_3\;^->Cl^->F^-, Na^+>Ca^{+2}>NH_4\;^+>Mg^{2+}>K^+$, and Fe>Al>Si>Zn>Pb respectively. The principal source of Yellow Sand were identified soil and sea salt. Mn used by the trace element of soil, the persentage of contribution from soil was calculated to be about 81.3% for the particle increased by Yellow Sand Phenomena. Also the principal chemical compounds of particle were estimate metals(Fe, Al, Si, Zn) oxides, $CaSO_4, NaSO_4, MgSO_4, NaC1, MgCl_2$ and $(NH_4)_2SO_4$.

  • PDF

Enhanced Behaviors of Ionic-Polymer Metal Composite (IPMC) Actuator Coupled with Polymeric Anion-doped Polypyrrole Thin Film

  • Hong, Chan;Nam, Jae-Do;Tak, Yong-Sug
    • 전기화학회지
    • /
    • 제9권4호
    • /
    • pp.137-140
    • /
    • 2006
  • In order to overcome the weak actuation and relaxation problems during the deformation of IPMC actuator, polymeric anion (polystyrenesulfonate)-doped polypyrrole(Ppy(PSS)) was electrodeposited onto IPMC actuator. Electrochemical quartz crystal microbalance study showed that hydrated cations were instilled into Ppy(PSS) film and polymeric-anion dopants introduced during polymerization were not expelled. Ppy(PSS)-coated IPMC actuator formed two electrode/electrolyte interfaces, Pt/nafion and Ppy(PSS)/bulk solution, and additive volume expansion phenomena at interfaces induced the large deformation compensating the relaxation of actuation by back diffusion of water.

Synthesis and Binding Properties of a Calix[4]crown-6-functionalized Polymeric Ion Acceptor

  • Seol, Wan-Ho;Yang, Yu-Sun;Lee, Chil-Won;Gong, Myoung-Seon
    • Macromolecular Research
    • /
    • 제12권4호
    • /
    • pp.427-430
    • /
    • 2004
  • Calix[4]crown-6-2,4-bis(2-hydroxyethyl ether) (2), which has crown-6 moieties at the 1- and 3-positions and hydroxyethyl functions at the 2- and 4-positions, was prepared for the syntheses of polyester 3 and polyurethane 4 by reactions with adipoyl chloride and hexamethylene diisocyanate, respectively. The ion binding characteristics of monomer 2 and polymers 3 and 4 toward alkali and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. We observed that the polyurethane 4 has a higher binding affinity toward various metal cations when compared to polyester 3, which exhibits cesium ion selectivity.

Stress-assisted oxidation behaviour of inconel 52M/316 austenitic stainless-steel dissimilar weld joints in a simulated pressurised water reactor

  • Xu, Youwei;Yang, Binhui;Shi, Yu
    • Nuclear Engineering and Technology
    • /
    • 제54권10호
    • /
    • pp.3778-3787
    • /
    • 2022
  • The stress-assisted oxidation behaviour of Inconel 52 M/316 austenitic stainless-steel (SS) dissimilar weld joints (DMWJ) in a simulated pressurised water reactor environment was investigated. A corrosion galvanic couple formed between the Inconel 52 M and 316 SS due to differences in their nonferrous metal content. The electric field from the corrosion couple attracted metal cations (e.g. Fe2+, Cr3+) to the Inconel 52 M that were deposited as FeCr2O4. An additional corrosion galvanic couple was generated due to variations in the plastic deformation of the DMWJ. The superposition of electric fields from the different couples resulted in ridge-like oxide depositions in the fusion zone.

Pd2+ 검출용 고감도 형광화학센서 (Highly Sensitive and Selective Fluorescent Chemosensors Specific for Pd2+ Detection)

  • 왕정;하창식
    • 접착 및 계면
    • /
    • 제14권1호
    • /
    • pp.13-20
    • /
    • 2013
  • 팔라듐은 치과 및 의료용 기구, 의료용 재료, 보석 및 자동차, 고기능성 점 접착제 등을 생산하는데 중요한 역할을 한다. 팔라듐을 이용하는 반응에서의 중요성에도 불구하고 팔라듐은 최종생성물에 잔존할 경우 인체에 해로운 독성을 가지고 있다. 그 중에서도 특히 $PdCl_2$는 독성이 가장 크다. 따라서 $Pd^{2+}$ 이온 검출은 매우 중요한 연구과제인데 그 중에서도 특히 형광분석법은 가장 손쉽고 경제적이면서 감도가 높고 선택성이 높은 방법으로 알려져 있다. 본 연구에서는 알파-카보닐로 치환된 파이렌 유도체인 감마-옥소-1-파이렌부틸산(OPBA)이 수용액에 금속이온으로 감도가 크고 선택성이 우수한 것으로 밝혀졌다.

Effect of B-Cation Doping on Oxygen Vacancy Formation and Migration in LaBO3: A Density Functional Theory Study

  • Kwon, Hyunguk;Park, Jinwoo;Kim, Byung-Kook;Han, Jeong Woo
    • 한국세라믹학회지
    • /
    • 제52권5호
    • /
    • pp.331-337
    • /
    • 2015
  • $LaBO_3$ (B = Cr, Mn, Fe, Co, and Ni) perovskites, the most common perovskite-type mixed ionic-electronic conductors (MIECs), are promising candidates for intermediate-temperature solid oxide fuel cell (IT-SOFC) cathodes. The catalytic activity on MIEC-based cathodes is closely related to the bulk ionic conductivity. Doping B-site cations with other metals may be one way to enhance the ionic conductivity, which would also be sensitively influenced by the chemical composition of the dopants. Here, using density functional theory (DFT) calculations, we quantitatively assess the activation energies of bulk oxide ion diffusion in $LaBO_3$ perovskites with a wide range of combinations of B-site cations by calculating the oxygen vacancy formation and migration energies. Our results show that bulk oxide ion diffusion dominantly depends on oxygen vacancy formation energy rather than on the migration energy. As a result, we suggest that the late transition metal-based perovskites have relatively low oxygen vacancy formation energies, and thereby exhibit low activation energy barriers. Our results will provide useful insight into the design of new cathode materials with better performance.