• 한국식품위생안전성학회지
• /
• 제8권4호
• /
• pp.231-240
• /
• 1993

This study was carried out to find out the content of injurious heavy metals, such as mercury, lead, cadmium and arsenic of marine fish which had been captured in adjacent sea of Korea. From March, 1 to April, 30 in 1993. 60 sample of fishes were collected the adult fish and young fish. These samples were analyzed by the Mercury Analyzer and Inductively Coupled Plasma Emission Spectro Analyzer. The results of the study were summarized as follows: (1) The content of mercury in Therafra chalcograma was 0.112$\pm$0.034 ppm which was higher than other fishes, but Pseudosciaena manchurica and Pampus argenteus had lower (P<0.05). Although lead content of Trichiurus lepturus was 0.359$\pm$0.056 ppm, which was higher than other fishes. The lead content of Theragra chalcograma had lower to the almost same level. The cadmium content of the Theragra chalcograma was 0.069$\pm$0.010 ppm which was higher than other samples, but Pseudosciaena manchurica had 0.039$\pm$0.020 ppm to lower level. Though there was some fluctuation in the arsenic content which was 0.433~3.752 ppm, the arsenic content of Therafra chalcograma was 3.752$\pm$2.873 ppm which was the higher than any other fishes. But there are not statistical significances. (2) Heavy metal content by the maturity of the fishes: Mercury content of the old Pseudosciaena manchurica was 0.055$\pm$0.15 ppm comparing to the young's result of 0.030$\pm$0.009 ppm (P<0.05). Though there were some differences according to the maturity, but thee was no statistical significance. (3) In view of the correlation of the heavy metal content, for Pseudosciaena manchurica, high correlation was founded to r=0.6437 between mercury and cadmium (P<0.05). Though the content of mercury, arsenic cadmium and lead had positive correlation (r=0.2725) and negative correlation (r=-0.3958), but there was no significance at all. The other fishes were not found correlation between the heavy metal content. Positive correlation was found between age with mercury in Pseudociaena manchurica (r=0.7018, P<0.05). The negative correlation of age with lead content in the Pseudociaena Manchurica was signigicant (P<0.05). The correlation coefficient was r=-0.7623. The age with mercury content in Coloabis saira had high correlation (r=0.7201, P<0.05). Through the above analysis, it can get conclusion that injurious heavy metal content of the fishes in Korea such a mercury, lead, cadmium and arsenic were at the level of natural content. At present, guidelines of maximum residue level allowed at foreign countries about the injurious heavy metal have been used according to the kinds of fish but our government guideline for the marine fishes in only total mercury below 0.7 ppm and lead below 2 ppm. So more aggressive guidelines for the allowance level of heavy metals in marine fishes are required for the safety of foods.

• 한국토양비료학회지
• /
• 제49권6호
• /
• pp.768-775
• /
• 2016

Heavy metal pollution in arable field is an critical problem due to crop safety. For this reason, national survey of heavy metal pollution in the arable field near at the industrial area has been conducted from 1999 in Korea. The main purpose of this research was to monitor heavy metal pollution in Chungnam/chungbuk province and to evaluate pollution index (PI) in soil. Total of 15 sampling locations were examined and average concentration of each heavy metals were following: As - $2.99{\pm}2.63$, Cd - $0.23{\pm}0.07$, Cu - $9.35{\pm}6.48$, Ni - $9.26{\pm}8.03$, Pb - $10.18{\pm}3.32$, Zn - $52.9{\pm}17.18$. No sampling site was exceeded threshold level of each heavy metals. Calculated PI in soil was ranged between 0.03 - 0.27 indicating that also no heavy metal pollution is occurred in examined sampling locations. Although, no heavy metal pollution was observed in the examined sites but monitoring of heavy metal pollution should be continued for possible accidental pollution in arable field near at the industrial area.

• 한국음향학회지
• /
• 제11권2호
• /
• pp.28-37
• /
• 1992

본 연구에서는 압전 특성이 우수한 PZT계 압전세라믹스를 원판상으로 박판화하여 금속 진동판에 부착시킨 PZT/Metal음향변환기를 제작하였다. 이 때 압전 세라믹스를 박판화하기 위해 'tape casting 방법‘을 사용했으며, 제작된 PZT/Metal 음향 변환기를 압전 부자, 압전 스피커등의 소자에 응용 시키기 위해 음향특성을 연구하였다. 연구 결과, 세라믹스의 압전 계수($d_{31}$)이 증가함에 따라 레벨(dB)이 -6dB에서 - 14dB로 증가된다. 음향 변환기의 직경비 ${\eta}$가 0.7-08이고, 두꺼비 (${\beta}$)가 1일 때 최적 음압 특성을 나타냈으며, 음압은 -15~-16dB정도이었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권4호
• /
• pp.8-14
• /
• 2015

Plants grown in metal-contaminated sites have to be managed and disposed of safely even in phytoremediation because heavy metals can be transferred to other organisms through the food chain, which could result in bioaccumulation in organisms of a higher trophic level. However, if the harvested plants could be used for bioenergy, the ecological risk is reduced and phytoremediation improves economic feasibility. This study researched the effects of EDDS (Ethylenediamine disuccinate) on the heavy metal uptake performance of Brassica campetris and Sorghum biocolor, both of which have potential as bioenergy plants. The results showed that EDDS could increase Pb, Cu, Ni, Cd, and Zn concentrations in the roots and shoots of both of these plants. Furthermore, EDDS reduced the metal inhibition of the S. bicolor length growth. The translocation factors (TF) of S. bicolor and B. campestris are smaller than one for all five heavy metals tested and decreased by the following order: heavy metal + EDDS > heavy metals only > uncontaminated soil. The results suggest that with regard to plant growth and metal accumulation, S. bicolor treated with EDDS is more suitable than is B. campestris for the phytoremediation of soils contaminated with multiple metal species.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.129.2-129.2
• /
• 2013

Electron injection enhancement at OLED (organic light-emitting diodes) cathode side has mostly been achieved by insertion of a low work function layer between metal electrode and emissive layer. We investigated the interfacial chemical reactions and electronic structures of alkaline-earth metal (Ca, Ba)/Alq3 [tris(8-hydroxyquinolinato)aluminium] and Ca/BaF2/Alq3 using in-situ X-ray & ultraviolet photoelectron spectroscopy. The alkaline-earth metal deposited on Alq3 generates two energetically separated gap states in sequential manner. This phenomenon is explained by step-by-step charge transfer from alkali-earth metal to the lowest unoccupied molecular orbital (LUMO) states of Alq3, forming new occupied states below Fermi level. The BaF2 interlayer initially prevents from direct contact between Alq3 and reactive Ca metal, but it is dissociated into Ba and CaF2. However, as the Ca thickness increases, the Ca penetrates the interlayer to directly participate in the reaction with underlying Alq3. The influence of the multiple gap state formation by the interfacial chemical reaction on the OLED performance will be discussed.

• Environmental Engineering Research
• /
• 제24권1호
• /
• pp.82-90
• /
• 2019

Meeting the regulations based on the short-term leaching tests may not necessarily assure the environmental and human health safety of reusing mine wastes. This study investigated heavy metal leachability of four metal mine waste samples (e.g., Z, Y, H, and M) and human health risk of reusing them as construction materials. The heavy metal leachability did not depend on the total heavy metal contents. For example, the Z sample contained greater amounts of As and Fe than Zn, but the leachates contained only Zn at a detectable level. This can be attributed to the crystalline structure and heavy metal fractions of the mine wastes. The leaching test results suggested that the four mine waste samples are potentially reusable. But the Z and M samples reused in industrial areas imposed carcinogenic risks. This was largely attributed to As that is exposed via dermal contact. The Y and H samples reused in residential areas imposed carcinogenic risk. The major exposure route was the ingestion of crops grown on the mine wastes and Cr was the major concern. The two-stage assessment involving leaching tests and risk assessment can be used to promote safe reuse of mine wastes.

• 보존과학회지
• /
• 제31권3호
• /
• pp.287-298
• /
• 2015

포름알데히드의 금속 손상은 보편적으로 알려진 것에 비해 손상농도와 손상정도의 정량화는 명확하지 않다. 본 연구는 금속시편(은, 구리, 철, 납, 황동)을 대상으로 가스부식시험기를 이용하여 포름알데히드 0.5, 1, 10, 100, 500ppm 농도에서의 손상, 손상농도에서 온 습도 조건에 따른 손상 가중, 손상농도에서 열화금속시편의 손상을 광학적, 화학적, 물리적 측정방법으로 평가하였다. 이 결과, 포름알데히드 농도 500ppm/day에서 납시편의 광학적, 화학적, 물리적 손상과 전체금속시편의 광학적 손상이 확인되었다. 기본조건($25^{\circ}C$, 50%), 고온조건($30^{\circ}C$, 50%)에서는 일부시편의 광학적 손상이 가중되었고, 고온 고습조건($30^{\circ}C$, 80%), 고습조건($25^{\circ}C$, 80%)에서는 납시편의 화학적 손상이 각각 2.8배, 1.3배 가중되었다. 열화금속시편의 포름산이온 농도 결과, 철시편, 황동시편의 부식 생성물은 포름알데히드 가스와 활발히 반응하는 것으로 나타났으며, 납시편의 표면 산화막은 포름알데히드 가스와의 반응을 감소시키거나 차단하는 것으로 확인되었다.

• 한국환경보건학회지
• /
• 제32권3호
• /
• pp.199-206
• /
• 2006

Various heavy metals have been known for causing ischemic stroke. In order to describe the causative relationship between the blood levels of various heavy metals and stroke patients, 116 patients with stroke and 111 patients without stroke were selected from one Oriental medical hospital in Wonju, Korea. Total of 9 kinds of metals such as As, Cd, Co, Cu, Hg, Mn, Ni, Pb, and Zn were analyzed in blood from patients with and without stroke. There were no significant differences in the means of metal concentrations between the stroke and nonstroke patients except for the mean of Co concentration. In the case of Co, the means for stroke and non-stroke patients were 0.44 ug/l and 0.40 ug/l showing a significant difference at the level of p-value=0.05. The odds ratios for each metal ranged from 0.96 to 2.86. Most odds ratios were not significant but the odds ratio for Co, $2.86{\pm}1.49$ was significant, indicating that Co increases the risk of stroke by 2.86 times. In order to identify the specific risk level of stroke increased by a multiple interaction of metals, regression coefficients and odds ratio for a pair or multiple pair of metals were reanalyzed. However, all of regression coefficients and odds ratios were not significant. In conclusion, Co showed the significant level in blood from patients with stroke. In addition, the odds ratio of stroke was significantly different from other metals. Thus, it is considered that Co among various metals analyzed in this study is the important metal for increasing the risk of stroke.

• Structural Engineering and Mechanics
• /
• 제64권2호
• /
• pp.195-204
• /
• 2017

Analytical and experimental studies of the innovative pipe in pipe damper have been recently investigated by the authors. In this paper, by adding lead or zinc infill or slit diaphragm inside the inner pipe, it is tried to increase the equivalent viscous damping ratio improving the cyclic performance of the recently proposed multi-level control system. The damper consists of three main parts including the outer pipe, inner pipe and added complementary damping part. At first plastic deformations of the external pipe, then the internal pipe and particularly the added core and friction between them make the excellent multi-level damper act as an improved energy dissipation system. Several kinds of added lead or zinc infill and also different shapes of slit diaphragms are modeled inside the inner pipe and their effectiveness on hysteresis curves are investigated with nonlinear static analyses using finite element method by ABAQUS software. Results show that adding lead infill has no major effect on the damper stiffness while zinc infill and slit diaphragm increase damper stiffness sharply up to more than 10 times depending on the plate thickness and pipe diameter. Besides, metal infill increases the viscous damping ratio of dual damper ranging 6-9%. In addition, obtained hysteresis curves show that the multi-level control system as expected can reliably dissipate energy in different imposed energy levels.

• 대한치과보철학회지
• /
• 제45권3호
• /
• pp.295-302
• /
• 2007

Statement of problem. Fracture of the tooth-colored superstructure material is one of the main prosthetic complications in implant-supported prostheses. Purpose. The purpose of this in vitro study was to compare the fracture strength between the cement-retained implant-supported metal-ceramic crowns and the indirect composite resinveneered metal crowns under the vertical compressive load. Material and methods. Standard implants of external type (AVANA IFR 415 Pre-mount; Osstem Co., Busan, Korea) were embedded in stainless steel blocks perpendicular to their long axis. Customized abutments were fabricated using plastic UCLA abutments (Esthetic plastic cylinder; Osstem Co., Busan, Korea). Thirty standardized copings were cast with non-precious metal (Rexillium III, Pentron, Walling ford, Conn., USA). Copings were divided into two groups of 15 specimens each (n = 15). For Group I specimens, metal-ceramic crowns were fabricated. For Group II specimens, composite resin-veneered (Sinfony, 3M-ESPE, St. Paul, MN, USA) metal crowns (Sinfony-veneered crowns) were fabricated according to manufacturer's instructions. All crowns were temporary cemented and vertically loaded with an Instron universal testing machine (Instron 3366, Instron Corp., Norwood, MA, USA). The maximum load value (N) at the moment of complete failure was recorded and all data were statistically analyzed by independent sample t-test at the significance level of 0.05. The modes of failure were also investigated with visual analysis. Results. The fracture strength of Sinfony-veneered crowns ($2292.7{\pm}576.0N$) was significantly greater than that of metal-ceramic crowns ($1150.6{\pm}268.2N$) (P < 0.05). With regard to the failure mode, Sinfony-veneered crowns exhibited adhesive failure, while metal-ceramic crowns tended to fracture in a manner that resulted in combined failure. Conclusion. Sinfony-veneered crowns demonstrated a significantly higher fracture strength than that of metal-ceramic crowns in cement-retained implant-supported prostheses.