• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2489-2497
• /
• 2023

Co and Eu impurities in the SSCs are nuclides that dominantly influence the neutron-induced radioactive inventory in metal and concrete radwastes (radioactive wastes) during NPP decommission. The impurity concentrations provided by NUREG/CR-3474 were used for the practical range of Co and Eu impurity concentrations to be applied to the code calculations. Metal structures near the core were evaluated to be ILW (intermediate-level waste) for the whole range of Co impurity concentration, so the boundary line between ILW and LLW (low-level waste) has no change for the whole concentration range provided by NUREG/CR-3474. Also, the boundary line between VLLW (very low-level waste) and CW (clearance waste) in the concrete shield could alter a little depending on the Eu impurity concentration within the range provided by NUREG/CR-3474. From this work, it is found that the concentration of material impurities of SSCs gives no critical impact on determining radwaste levels.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.1
• /
• pp.25-32
• /
• 2009

The analyzed results of the heavy metal concentration of air and soil at the D iron-manufacturing company area were as follows; The concentration of $PM_{2.5}$ in the case area exceeded the air standard level in 3 seasons except summer. The $PM_{10}$ level was similar to the standard level, which was similar to the standard level, which was $50{\mu}g/m^3$. The Pb concentration of air in the case area was $0.13{\mu}g/m^3$, which was slightly higher than $0.11{\mu}g/m^3$ in the control area. The concentration of Cd and Cr were higher in the control area. The heavy metal (Pb) concentration of soil in the case area was $10.7{\mu}g/m^3$, which was higher than that of the control area. For these results, it is necessary for the D iron-manufacturing company area to consider a counter plan for dusts and are duction plan for the heavy metal (Pb).

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.337-354
• /
• 1989

In order to evaluate the noisy environment and hearing loss of workers served in noisy working environment, the author investigated 212 manufacturing industries located in Ulsan Industrial District that could be observed for 3 successive years from 1986 to 1988. The obtained results were as follows: 1. There was increased tendency in the number of workers served in noisy working environment and that of examined of hearing loss for three years. 2. In the noise level of working environment, the number of industries less than 89dB(A) was increased every year, while more than 90dB(A) was in decreasing tendency. 3. Mean hearing loss by frequency was the most prominent in 4,000Hz, the level of hearing loss was in increasing tendency yearly, and that of left eat was higher than right ear in almost all type of industry. 4. In 1986, the level of hearing loss by type of industry was highest in manufacture of electric and electronic, and followed by paper and plywood, and metal products in right ear: that was in the order of manufacture of electric and electronic, metal products and textile products in left ear. In 1987, that was in the order of manufacture of metal products, machinery and others in right ear, and metal products, machinery and food stuff in left ear in 1988, manufacture of others, food stuff and machinery in both ear. 5. In hearing loss by service duration, right ear of 5-9 years group was higher than that of less than 5 years in 1987, whereas in 1988, the longer in service duration, the higher in the level of hearing loss in both ear. 6. In 1986, 1987 and 1988, the prevalence rate of noise-induced hearing loss were showed increasing tendency as 0.4% ,0.8% and 1.5% , respectively, and manufacture of textile products was highest(1.0%) in 1986, machinery(1.2%) in 1987 and others(2.8%) in 1988. 7. The proportion of grade E in early loss index were 76.1% (1986), 78.2% (1987) and 80.5% (1988) in left ear, 75.9% (1986), 76.4% (1987) and 75.9% (1988) in right ear.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.821-826
• /
• 2003

Laboratory experiments were peformed to understand physical properties of soil-cement column under the influence of acidic flow including metal contaminants and its retaining capacity against metal migration. The contaminant used in this study was nitric acid with Cu and Cd. The Permeability of soil-cement column decreased when pH of the column began to drop below 12. Decreases in pH led to significant reduction of compressive strength of clayey soil-cement specimen, while relatively marginal reduction for sandy soil-cement specimen. The metal contaminants did not leachate from soil-cement column until pH of soil-cement dropped below 7∼8 for Cu and 9∼10 for Cd. Metal contaminants were precipitated and trapped inside the soil-cement column at pHs higher than those mentioned as verified with metal analysis and visual inspection. This indicated that soil-cement column not only performs well as a cut-off wall, but also helps alleviating the level of contamination of the surrounding environment.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.05a
• /
• pp.61-64
• /
• 2002

Fiber reinforced metal laminate(FRML) consists of alternations layers of metal and fiber reinforced composite. The difference in the coefficients of thermal expansion between metal and composite layer produces remarkable amount of thermal residual stresses between layers. Generally, FRML shows a tensile stress in metal layers, a compressive stress in composite layers after curing. In this study, the thermal residual stresses of several types of FRML are investigated to get the best combination of metal and composite which can reduce the thermal residual stresses. The residual stress level is compared with the strength of each layers to explain the fracture mechanism of FRML.

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.11 no.2
• /
• pp.33-36
• /
• 2002

As patients have concerned the esthetics of dental restorations, the porcelain fused to metal restorations have gain their popularity due to their strength and esthetic appearance for many years. However, metal collar in subgingival level of porcelain fused to metal restoration often causes black shadows. Inadequately positioned metal collar causes plaque depositions, gingival inflammations, black shadows, and discolorations of margin area. Those problems can be avoided by a clear finishing line, well-fabricated provisional restorations with precise margin and fine polishing, collarless porcelain fused to metal restoration, and all ceramic restoration. In this case report, collarless porcelain fused to metal restoration was used to treat cervical discoloration from old restorations.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.365-370
• /
• 2000

Schottky contacts on n-In$\_$0.53//Ga$\_$0.47//As have been made by metal deposition on substrates cooled to a temperature of 77K. The current-voltage and capacitance-voltage characteristics showed that the Schottky diodes formed at low temperature had a much improved barrier height compared to those formed at room temperature. The Schottky barrier height ø$\_$B/ was found to be increased from 0.2eV to 0.6eV with Ag metal. The saturation current density of the low temperature diode was about 4 orders smaller than for the room temperature diode. A current transport mechanism dominated by thermionic emission over the barrier for the low temperature diode was found from current-voltage-temperature measurement. Deep level transient spectroscopy studies exhibited a bulk electron trap at E$\_$c/-0.23eV. The low temperature process appears to reduce metal induced surface damage and may form an MIS (metal-insulator-semiconductor)-like structure at the interface.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.1
• /
• pp.93-102
• /
• 1994

This paper, presents SECRET(SEC REliability Tool), which predicts reliability problems related to the hot-carrier and electromigration effects on the submicron MOSFETs and interconnections. To simulate DC and AC lifetime for hot-carrier damaged devices, we have developed an accurate substrate current model with the geometric sensitivity, which has been verified over the wide ranges of transistor geometries. A guideline can be provided to design hot-carrier resistant circuits by the analysis of HOREL(HOT-carrier RFsistant Logic) effect, and circuit degradation with respect to physical parameter degradation such as the threshold voltage and the mobility can also be expected. In SECRET, DC and AC MTTF values of metal lines are calculated based on lossy transmission line analysis, and parasitic resistances, inductances and capacitances of metal lines are accurately considered when they operate in the condition of high speed. Also, circuit-level reliability simulation can be applied to the determination of metal line width and-that of optimal capacitor size in substrate bias generation circuit. Experimental results obtained from the several real circuits show that SECERT is very useful to estimate and analyze reliability problems.

• Journal of Environmental Health Sciences
• /
• v.18 no.1
• /
• pp.47-57
• /
• 1992

This study was performed to evaluate contamination degree of heavy metals in sediments of Han River, compared with other nation's evaluation method. The results were as follows 1. The contamination Ratio calculation method by heavy metal concentration in differnt fraction size has a limitation to apply to all of the areas of Han river because of its characteristics of sediment. As a result, this method applied to only 4 areas of Pal Dang, Wang Sook Chon, Uk Chon, and Bul Kwang Chon, and Contmination Ratio of heavy metals in those areas were relatively low of below 3. So it's considered that those areas have less contaminated from anthropogenic contaminants. 2. The Contamination Ratio calculation method by heavy metal concentration in different areasthat of upper area to be background level-has a limitation also to apply to Han river. But it is considered that this method was relatively suitable to apply, so it should be prepared evaluation standand method for them. Contamination ratio from background level as Pal Dang area were most high in An Yang Chon. So it must be prepared purification and control measure at An Yang Chon.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.64-67
• /
• 2003

본 연구는 nano-level 디바이스 제조를 위한 새로운 금속 전극인 W 과 Ti metal 표면 세정에 관한 연구이다. 기존 $SC-1(NH_4OH/H_2O_2/H_2O)$ 세정 용액에서 산화제 ($H_2O_2$)를 사용하지 않는 dilute $NH_4$OH 세정은 전극 사이 절연막 표면의 particle 제거가 가능하면서 노출된 metal 막의 세정 damage를 최소화 시키는 것을 확인했다. SC-1 용액 내에 산화제 미 첨가 효과는, metal 막의 식각 현상을 억제시키고, 절연막 표면의 particle 제거 효과에 영향을 미치지 않는 것으로 판단된다. 이러한 방법은 short time 공정이 필요한 관계로, spin type wet 장비 채택으로 세정 효과의 극대화를 얻을 수 있을 것으로 판단된다.