• Journal of the Korea Computer Graphics Society
• /
• v.19 no.1
• /
• pp.11-20
• /
• 2013

This paper introduces a user interface for large 3D meshes in mobile systems, which have limited memory, screen size and battery power. A large 3D mesh is divided into partitions and simplified in multi-resolutions so a large file is transformed into a number of small data files and saved in a PC server. Only selected small files specified by the user are hierarchically transmitted to the mobile system for 3D browsing and rendering. A 3D preview in a pop-up shows a simplified mesh in the lowest resolution. The next step displays simplified meshes whose resolutions are automatically controlled by the user interactions. The last step is to render a set of detailed original partitions in a selected range. As a result, while minimizing using mobile system resources, our interface enables us to browse and display 3D meshes in mobile systems through real-time interactions. A mobile 3D viewer and a 3D app are also presented to show the utility of the proposed user interface.

• Analytical Science and Technology
• /
• v.14 no.6
• /
• pp.486-493
• /
• 2001

The effect of SIMS analysis conditions such as mesh grid, offset voltage and ion species on the in-depth profile for bismuth titanate thin film was examined in terms of charging effect and detection limit. The results shows that the use of offset voltage -40 V reduces the charging effect and the detection limit. The employment of mesh grid in sample preparation leads to the reduction of the charging effect in small amount, but deteriorate the detection limit. Utilization of primary $O^-$ ion for SIMS analysis of bismuth titanate thin film showed almost the same effect as using offset voltage -40 V. However, it takes approximately triple acquisition time than using $O_2{^+}$ ion due to the poor beam current of the source in the experiment.

• Journal of Veterinary Clinics
• /
• v.41 no.1
• /
• pp.24-29
• /
• 2024

A 6-year-old spayed female French Bulldog presented with a left-sided chest wall tumor. Physical examination revealed that the tumor was firmly adhered to the chest wall. A preoperative punch biopsy of the tumor revealed a grade 2 soft tissue sarcoma (STS). On computed tomography, the tumor's dimensions were assessed as 6.5 × 5.7 × 3.5 cm, and it exhibited invasiveness near the tissue surrounding the ninth rib. The tumor size was large in comparison to the dog's chest wall area. Hence, if the traditional wide-margin resection surgery were to be performed, primary wound closure seemed impractical and could potentially result in respiratory function complications. Therefore, considering the extent of tumor invasion and grade, deep margins were established to include the removal of the eighth to tenth ribs, and a 1-cm lateral margin was designated to enable primary wound closure. To reconstruct the chest wall, polypropylene mesh was attached to the adjacent ribs and the remaining muscles were sutured and covered over the mesh. The dog exhibited a rapid recovery beginning the day after the operation. Postoperative biopsy confirmed that the tumor was a grade 2 STS, and the surgical margins were evaluated as incomplete. The owner chose to pursue follow-up observation instead of chemotherapy. In this study, the surgical approach was chosen based on the importance of functional recovery after surgery. Recent research indicates that the tumor grade is more critical for postoperative prognosis than the extent of surgical margins when removing an STS.

• Journal of KIISE:Software and Applications
• /
• v.30 no.1_2
• /
• pp.153-163
• /
• 2003

In this paper, we propose a new technique of image based rendering(IBR) for the pose transformation of a face by using only a frontal face image and its mesh without a three-dimensional model. To substitute the 3D geometric model, first, we make up a standard mesh set of a certain person for several face sides ; front. left, right, half-left and half-right sides. For the given person, we compose only the frontal mesh of the frontal face image to be transformed. The other mesh is automatically generated based on the standard mesh set. And then, the frontal face image is geometrically transformed to give different view by using Invertible Meshwarp Algorithm, which is improved to tolerate the overlap or inversion of neighbor vertexes in the mesh. The same warping algorithm is used to generate the opening or closing effect of both eyes and a mouth. To evaluate the transformation performance, we capture dynamic images from 10 persons rotating their heads horizontally. And we measure the location error of 14 main features between the corresponding original and transformed facial images. That is, the average difference is calculated between the distances from the center of both eyes to each feature point for the corresponding original and transformed images. As a result, the average error in feature location is about 7.0% of the distance from the center of both eyes to the center of a mouth.

• Korean Journal of Food Science and Technology
• /
• v.44 no.3
• /
• pp.306-311
• /
• 2012

This study was performed to evaluate the effects on saccharification and alcohol fermentation, according to the size of the ground rice (12, 20, 35 mesh) and ultra sonication process (15, 30, 60, 120 min). After saccharification of the ground rice samples for 3 h at $60^{\circ}C$, sugar content was observed to be high in the order of cooked ground rice (CGR) > ultrasonicated ground rice (UGR) > ground rice (GR), in all sizes of ground rice. Further, higher sugar content was obtained by increasing the time of ultrasonication process. Almost 90% saccharification of CGR ($11.5^{\circ}Bx$) could be reached up to $10.2^{\circ}Bx$ by ultrasonicating 35 mesh ground rice for 120 min. After alcohol fermentation on the 35 mesh saccharified-UGR for 4 days at $25^{\circ}C$, 16.7% alcohol concentration could be obtained, as high as of CGR (17.2%). After 4 days of alcohol fermentation, UGR showed a lower pH and a higher acidity (pH 4.06-4.17, 0.99-1.1%) than CGR (pH 4.27, 0.75%).

• Transactions of the Korean Society of Automotive Engineers
• /
• v.12 no.3
• /
• pp.101-108
• /
• 2004

A FEM-based efficient method is developed for the shape optimization of 2-D structures. The combined SLP and Simplex method are coupled with finite element analysis. Selected set of master nodes on the design boundaries are employed as design variables and assigned to move towards their normal directions. The other nodes along the design boundaries are grouped into the master node. By interpolating the repositioned master nodes, the B-spline curves are formed so that the rest mid-nodes efficiently settle down on the B-spline curves. Mesh smoothing scheme is also applied for the nodes on the design boundary to maintain most finite elements in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1334-1339
• /
• 2003

An efficient method is developed for the shape optimization of 2-D structures. The sequential linear programming is used for minimization problems. Selected set of master nodes are employed as design variables and assigned to move towards the normal direction. After adapting the nodes on the design boundary, the B-spline curves and mesh smoothing schemes are used to maintain the finite element in good quality. Finally, a numerical implementation of optimum design of an automobile torque converter piston subjected to pressure and centrifugal loads is presented. The results shows additional weight up to 13% may be saved after the shape optimization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.406-410
• /
• 1993

In the industria; heat treatment fields, some parts of the continous funcae have been automated, but there are not enough interests and achievements for sutomatic charging machine. The automatic charging machine is set up to the industrial mesh belt type continuous furnace which continuously orintermittently charge and extract industrial units for the heat treatments.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.6
• /
• pp.53-59
• /
• 1987

The effect of the three types of fuel vaporizing device on the engine torque and exhaust emission was investigated. Among the three types of fuel vaporizing device designed for the experiments, a 88mm long device with mesh around the inside pipe showed stable lean mixture combustion up to 21:1 air-fuel ratio and reduced the exhaustion of CO and HC. Compared with the general trend in the decrease of engine torque it was observed that the decrease of engine torque in this lean mixture combustion with the new device was small.

• Journal of the Korean Mathematical Society
• /
• v.58 no.1
• /
• pp.1-28
• /
• 2021

We study a continuous data assimilation algorithm for the three-dimensional simplified Bardina model utilizing measurements of only two components of the velocity field. Under suitable conditions on the relaxation (nudging) parameter and the spatial mesh resolution, we obtain an asymptotic in time estimate of the difference between the approximating solution and the unknown reference solution corresponding to the measurements, in an appropriate norm, which shows exponential convergence up to zero.