• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.865-870
• /
• 2004

This paper describes the generation of chordal surface for various shell structures, such as automobile bodies, plastic injection mold components and shell metal parts. After one-layered tetrahedral mesh is generated by an advancing front algorithm, the chordal surface is generated by cutting a tetrahedral element. It is generated one or two elements at a tetrahedral element and the chordal surface is composed with triangular or quadrilateral elements. This algorithm has been tested on several models with rib structure.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.3
• /
• pp.604-608
• /
• 2010

An electric fan for cooling high density electronic devices is limited and operated in very low efficiency. The corona discharge is utilized as the driving mechanism for an ionic gas pump, which allows for air flow control and generation with low noise and no moving parts. These ideal characteristics of ionic pump give rise to variety applications. However, all of these applications would benefit from maximizing the flow velocities and yields of the ionic pump. In this study, a needle-mesh type ionic pump has been investigated by focusing on the radius of curvature of corona needle points elevating the ionic wind velocity and efficiency. It is found that the radius of curvature of the corona discharge needle point influences significantly to produce the ionic wind and efficiency. As a result, an elevated ionic wind velocity and increased ionic wind generation yield can be obtained by optimized the radius of curvature of the corona needle electrode.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.2
• /
• pp.144-149
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.784-787
• /
• 2002

The NURBS surfaces are widely employed for exchanging geometric models between different CAD/CAE systems. However if the input NURBS surfaces are poorly parameterized, most surface meshing algorithms may fail or the constructed meshes can be ill-conditioned. In this paper presents a new method is presented that can generate well conditioned meshes even on poorly parameterized NURBS surfaces by regenerating NURBS surfaces. To begin with, adequate Points are sample on original poorly parameterized surfaces and new surfaces are created by interpolating these points. And then. mesh generation is performed on new surfaces. With this method, models with poorly parameterized NURBS surfaces can be meshed successfully.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.12
• /
• pp.3159-3174
• /
• 1994

A simple octree encoding algorithm based on a tetrahedron root has been developed to be used for fully automatic generation of three dimensional finite element meshes. This algorithm starts octree decomposition from a tetrahedron root node instead of a hexahedron root node so that the terminal mode has the same topology as the final tetrahedral mesh. As a result, the terminal octant can be used as a tetrahedral finite element without transforming its topology. In this part(I) of the thesis, an efficient algorithm for the tetrahedron-based octree is proposed. For this development, the following problems have been solved, : (1) an efficient data structure for storing the octree and finite elements, (2) an encoding scheme of a tetrahedral octree, (3) a neighbor finding technique for the tetrahedron-based octree.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2006

This paper describes a novel automated analysis system for bellows of piping system. An automatic finite element (FE) mesh generation technique, which is based on the fuzzy theory and computational geometry technique, is incorporated into the system, together with one of commercial FE analysis codes and one of commercial solid modelers. In this system, a geometric model, i.e. an analysis model, is first defined using a commercial solid modelers for 3-D shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay triangulation technique is introduced as a basic tool for element generation. The triangular elements are converted to quadrilateral elements. Practical performances of the present system are demonstrated through several analysis for bellows of piping system.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.1
• /
• pp.10-18
• /
• 2003

FEM (Finite Element Method) is a fundamental numerical analysis technique in wide spread use in engineering application. As the solving time occupies small portion of entire FEM analysis time because of development of hardware, the relative lime to the whole analysis time to make mesh mod-els is growing. In particular, in the case of stiffeners such as features attached to plate in ship structure, the line constraints are imposed on mesh model together with other constraints such as holes. To auto-matically generate two dimensional quadrilateral mesh with the line constraints, an algorithm is pro-posed based on the constrained Delaunay triangulation and Q-Morph algorithm in which the line constraints are not considered. The performance of the proposed algorithm is evaluated. And some numerical results of our proposed algorithm ate presented.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1953-1955
• /
• 2002

An efficient automatic mesh generator suitable for the harsh model, which contains abrupt regions and thin layers, is implemented. It adopts two kinds of node placement scheme. In the beginning, the initial nodes on the boundary are generated automatically by an efficient boundary node generation scheme. And then the inner nodes are placed using nodal spacing value technique repeatedly from the initial mesh to final mesh. The effectiveness of the proposed technique is verified by a thin film micro-strip line modeling, where the final mesh contains no sliver elements.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2009

Triangular mesh models are widely used in reverse engineering, computer graphics, rapid prototyping and NC(numerical controller) tool-path generation. Triangular mesh models are generated from point clouds, surface models and solid models. A halfedge-based triangular mesh data structure is proposed and the development considerations are presented. In the presented data structure, halfedge is the key data structure. Halfedge stores its triangle index and the order in the triangle. Triangles do not store the halfedge lists explicitly. Halfedge is referred by value and defined when it is required. Proposed data structure supports four design requirements: efficient rendering, compact memory, supporting efficient algorithms and easy programming.

• Journal of the Society of Disaster Information
• /
• v.15 no.3
• /
• pp.427-439
• /
• 2019

Purpose: We generated geospatial information of unmanned aerial vehicle based on various SW and analyzed the location accuracy of orthoimage and DSM and texture mapping of 3D mesh. Method: The same unmanned aerial image data is processed using two different SW, and spatial information is generated. Among the generated spatial information, the orthoimage and DSM were compared with the spatial information generation results of the unmanned aerial photogrammetry SW by performing quantitative analysis by calculating RMSE of horizontal position and vertical position error and performing qualitative analysis. Results: There were no significant differences in the positional accuracy of the orthoimage and DSM generated by each SW, and differences in texture mapping in 3D mesh. The creation of the 3D mesh indicated the impact of the Unmanned Aerial Photogrammetry SW. Conclusion: It is shown that there is no effect of SW on the creation of orthoimage and DSM for geospatial analysis based on unmanned aerial vehicle. However, when 3D visualization is performed, texture mapping results are different depending on SW.