• Korean Journal of Medicinal Crop Science
• /
• v.10 no.1
• /
• pp.46-50
• /
• 2002

In DNA level, genetic study of Angelica species was firstly conducted to discriminate the bolting-resistant or low bolting variety, so called as Manchu, from other Korea collected lines and also this technuque was applied to identify the origin of commercial dried materials obtained from current oriental medicinal market. By RAPD analysis with 72 primers including sixty of 10-mers and twelve of 20-mers, respectively, three primers, which were related to the bolting resistant traits of Angelica gigas, were identified. Comparing the RAPD bands, URP04 primer showed the 1.7 kb specific band, which seemed to be related to delaying bolting traits, since it was observed only in Jinbu elite lines but not in others. On the other hand, since 1.2 kb band amplified by OPD11 was observed in other collected lines but not in Manchu var. and Jinbu line, this primer also could be considered as a selection marker for identifying bolting resistant or delaying bolting traits. In the same manner, since OPP09 did not show 1 kb major band but produced 0.8 kb and 1.2 kb bands in Manchu var., these three bands amplified by the primer could be considered one of the important key specifying Manchu var. related with the trait of Angelica gigas. OPC02 primer showed the same band patterns in all Korean collected lines, but not in other foreign introduced lines, such as A. sinensis from China, and A. acutiloba from Japan. Since these four RAPD primers, OPD11, OPP09, URP04, and OPC02 showed the specific polymorphisms in Angelica species, thus, these were useful to discriminate the three Angelica species, A. gigas, A. sinensis, and A. acutiloba.

• Journal of Korean Society of Disaster and Security
• /
• v.9 no.2
• /
• pp.93-101
• /
• 2016

In recent years, epidemics have raged with a 6-7 years period such as SARS (2002), Swine Flu (2009), MERS (2015). When an epidemic arises, the first advice is the isolation of infected patients and disease areas. Because it appears after a certain incubation period, the peoples worked with Infected (infection cause) staff and the place are largely exposed to the epidemic Risk. If you have an epidemic in the workplace, even if you close it, the business plan should be ready to continue the safety and protection measures for employees and the organization's core business. In this study We present the corresponding measures to protect the safety of the employees and to continue the core business during a pandemic outbreak and the introduction of BCP mainly corresponding practices of financial companies.

• Korean journal of applied entomology
• /
• v.22 no.2 s.55
• /
• pp.138-146
• /
• 1983

With the increase of pesticide consumption, not only pesticide handling population would grow greater but also the chances to be exposed to the pesticides would be also increased. Thus, safe use and handling of the pesticides are becoming more important and serious in these days. The pesticides are well known to most pepole, however there are very limited number of persons who have correct understanding of chamicals. Intoxication cases caused by pesticides have been reported very rarely through the mess media, even they were lack of scientific evidences. In this paper, problems related to pesticide manufacture, transportation, storage, sprays, and residues and their countermeasures were discussed in connection with public health and enviromental aspects. Acute intoxication cases by pesticide handling might be caused accidently either through manufacture, marketing, transportation, or spraying. Safety aspects of workers in manufacturing plants include not only exposure to toxic chemicals, but also posibilities of of explosion and brought about by pesticides and their diluents. The problems of water pollution by waste chemicals from the manufacturing factories were discussed. Packing and loading methods of pesticides for transportation are considered in safety scheme and discussions are given in association with traffic accidents. With regard to warehouse, the pesticide storage, location structure, keepers, and standing materials for emergency are concerned with safety aspects. Concerning the spraying of chemicals, there are some problems to be discussed about clothes, spray equipment, wind direction, spray period, and spray workers condition. After the spray, treatment of used containers, remainder of Pesticides, and spray tools are also discussed. For the dissolutions of problems on public health and environmental danger arising from pesticide residues, there are two legal sanctions; 'Pesticide Tolerances' and 'Pesticide Safe Use Standards'. These regulations are legally effective, however, some problems still remain in practices to implement the acts properly, because these provisions are followed by the far mers mostly. With these regards, most problems are concerned with various sectors and persons, affecting public health and environment from the producers to the end users and consumers. As a whole persons concerned with pesticides, every possible effort has to be assembled to protect hazards from the chemicals. For the foremost place, special training and education are required for managing groups; such as factory managers and agricultural extension workers who are responsible for training the factory workers and farmers. The education is the only way to solve the hazard problems caused by the pesticides.

• Journal of Microbiology and Biotechnology
• /
• v.28 no.11
• /
• pp.1928-1936
• /
• 2018

Recently, human infections caused by severe fever with thrombocytopenia syndrome virus (SFTSV), which can lead to fatality, have dramatically increased in East Asia. With the unavailability of vaccines or antiviral drugs to prevent and/or treat SFTSV infection, early rapid diagnosis is critical for prevention and control of the disease. Here, we report the development of a simple, rapid and sensitive portable detection method for SFTSV infection applying reverse transcription-loop mediated isothermal amplification (RT-LAMP) combined with one-pot colorimetric visualization and electro-free reaction platform. This method utilizes a pocket warmer to facilitate diagnosis in a resource-limited setting. Specific primers were designed to target the highly-conserved region of L gene of SFTSV. The detection limit of the RT-LAMP assay was approximately $10^0$ viral genome copies from three different SFTSV strains. This assay exhibited comparable sensitivity to qRT-PCR and 10-fold more sensitivity than conventional RT-PCR, with a rapid detection time of 30 to 60 minutes. The RT-LAMP assay using SFTSV clinical specimens has demonstrated a similar detection rate to qRT-PCR and a higher detection rate compared to conventional RT-PCR. Moreover, there was no observed cross-reactive amplification of other human infectious viruses including Japanese Encephalitis Virus (JEV), Dengue, Enterovirus, Zika, Influenza and Middle East Respiratory Syndrome Coronavirus (MERS-CoV). This highly sensitive, electro- and equipment-free rapid colorimetric visualization method is feasible for resource-limited SFTSV field diagnosis.

• Journal of agricultural medicine and community health
• /
• v.43 no.2
• /
• pp.63-73
• /
• 2018

Objectives: The purpose of this study was to review the disaster preparation and response programs and the status of disaster preparation in public health center. Methods: In depth interview was performed in September 2017 using 5 open questions to the persons who are in charge of disaster response services in 5 public health centers of different levels in Korea. The questions included general characteristics of public health center, disaster programs and future issues. The research hired a quality method. Results: In general, the persons in charge recognized the cooperative agency of local government in disaster management. There were no disaster preparation programs developed by the public health centers. Most of the preparation were passive activities such as emergency support, crisis management on communicable disease and quarantine, participation in biological disaster response training, and education etc. The persons in charge emphasized necessity of disaster preparation programs. Conclusions: Disaster preparation and responsiveness is an evolving issue in public health centers in Korea. Medical support system and communicable disease management system are being set up in the national level. A comprehensive system covering health management, nutritional support, mental health, environment management of shelter, and volunteers supports on public health center level needs to be developed along with a easy-to-follow manual.

• Fibers and Polymers
• /
• v.6 no.1
• /
• pp.19-27
• /
• 2005

High-speed melt spinning of syndiotactic polystyrene was carried out using high and low molecular weight poly­mers, HM s-PS and LM s-PS, at the throughput rates of 3 and 6 g/min. The effect of take-up velocity on the structure and properties of as-spun fibers was investigated. Wide angle X-ray diffraction (WAXD) patterns of the as-spun fibers revealed that the orientation-induced crystallization started to occur at the take-up velocities of 2-3 km/min. The crystal modification was a-form. Birefringence of as-spun fibers showed negative value, and the absolute value of birefringence increased with an increase in the take-up velocity. The cold crystallization temperature analyzed through the differential scanning calorimetry (OSC) decreased with an increase in the take-up velocity in the low speed region, whereas as the melting temperature increased after the on-set of orientation-induced crystallization. It was found that the fiber structure development proceeded from lower take-up velocities when the spinning conditions of higher molecular weight and lower throughput rate were adopted. The highest tensile modulus of 6.5 GPa was obtained for the fibers prepared at the spinning conditions of LM s-PS, 6 g/min and 5 km/min, whereas the highest tensile strength of 160 MPa was obtained for the HM s-PS fibers at the take-up velocity of 2 km/min. Elongation at break of as-spun fibers showed an abrupt increase, which was regarded as the brittle-duc­tile transition, in the low speed region, and subsequently decreased with an increase in the take-up velocity. There was a uni­versal relation between the thermal and mechanical properties of as-spun fibers and the birefringence of as-spun fibers when the fibers were still amorphous. The orientation-induced crystallization was found to start when the birefringence reached -0.02. After the starting of the orientation-induced crystallization, thermal and mechanical properties of as-spun fibers with similar level of birefringence varied significantly depending on the processing conditions.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.141-146
• /
• 2017

New infectious diseases such as MERS have been in need of many measures such as initial discovery, isolation, and crisis response. In addition, the culture of hospitals is changing, such as the general public 's visiting and Nursing Care Integration Services. However, as the qualifications and regulations of medical personnel in hospitals become rigid, overseas such as linens, wastes movements are replacing possible works with robots. we have developed a hospital logistics robot that can carry out various goods delivery within a hospital, and can move various kinds of objects safely to a desired location. In this thesis, we have studied a hospital logistics robot that can carry out various kinds of goods delivery within the hospital, and can move various kinds of objects such as waste, and linen safely to a desired location. The movement of a robot in a hospital may cause a collision between a person and an object, so that the collision must be prevented. In order to prevent collision, it is necessary to recognize whether or not an object exists in the movement path of the robot. And if there is an object, it should recognize whether it moves or not. In order to recognize human beings and objects, we recognize the person with face/body recognition technology and generate the context awareness of the object using 3D Vision image segmentation technology. We use the generated information to create a map that considers objects and person in the robot moving range. Thus, the robot can be operated safely and efficiently.

• FLOWER RESEARCH JOURNAL
• /
• v.19 no.4
• /
• pp.225-230
• /
• 2011

This research was performed for making data-base of cross-breeding between Cymbidium goeringii cultivars. Morphological characteristics were investigated and then genetic relationship was analyzed. Collected 20 Cymbidium goeringii cultivars were clustered into 2 groups. Seven cultivars were clustered into group I, and thirteen cultivars were clustered into group II. Group I doesn't have leaf pattern. Group have leaf pattern. The genetic relationship among collected 20 Cymbidium goeringii cultivars was anaylzed using RAPD with ten 10-mers random primer. Eighty-nine bands were generated by RAPD. Among the rest, three bands were monomorphic and eight-six bands were polymorphic. Overall similarity degree ranged from 0.521 to 0.862. The result of RAPD analysis was clustered into 2 groups, too. Sixteen cultivars were clustered into GroupX, and four cultivars were clustered into GroupY. Result of classification with morphological characteristics and RAPD showed different pattern, but 4 cultivars of GroupY by RAPD analysis were included in groupby morphological characteristics. Crossbreeding combination among low related coltivars in RAPD analysis may get more efficient result.

• Korean Journal of Clinical Laboratory Science
• /
• v.54 no.4
• /
• pp.293-297
• /
• 2022

In 2022, Korea reported a total of 224 perfusionists, employing nurses or clinical laboratory technologists (also known as medical technologists) to provide hospital self-education or reliable education. In 2021, the total number of perfusionists in Japan was 2,100, mainly supported by clinical engineering technologists. During the same period, the number of perfusionists reported in the United States was 4,212, who had received training in the master's program, post-bachelor certificate program, and bachelor's program. Most personnel in the USA were graduates of healthcare sciences or life sciences. Perfusionists must be knowledgeable in heart anatomy, physiology, pharmacology, pathology, hemodynamics, laboratory analysis, and quality assurance, as well as techniques to operate the cardiopulmonary bypass machine (heart-lung bypass machine). These are jobs similarly handled by clinical laboratory technologists. The importance of perfusionists became more prominent during two major crises: the MERS-CoV and COVID-19 pandemic. Currently, perfusionists play a significant role in the rapidly expanding field of extracorporeal membrane oxygenation (ECMO) and extracorporeal circulation during cardiac surgery. Results of the current study indicate that hospitals offering cardiac surgery and infectious disease hospitalization need to be institutionalized to secure a certain number of qualified perfusionists. In the future, we look forward to establishing a perfusion technology association under the Korean Society for Clinical Laboratory Physiology to provide academic exchanges.

• Journal of Service Research and Studies
• /
• v.12 no.4
• /
• pp.72-81
• /
• 2022

As new disasters such as COVID-19, MERS, and earthquakes appear in modern society, the nation's ability to manage uncertain risks is becoming more important. The government is promoting a disaster safety management policy closely related to daily life by reinforcing on-site response capabilities. Therefore, in order to respond more effectively to disasters that have recently been enlarged, complicated, and delocalized, there is a limit to only disaster-related organizations in the public sector. It is necessary to check it and find ways to develop it. In the event of an unpredictable national disaster or infection, the government needs disaster safety management measures closely related to daily life. Accordingly, as an efficient response and strategy such as procedures and methods for funeral support at the scene of a national disaster were needed, a designated funeral home was introduced. In the event of a major disaster, a large number of casualties that exceed the daily work level of the relevant department occur and rapid changes in relief, medical care, funeral and administrative procedures occur accordingly. The purpose of this study is to derive basic operating directions and prompt funeral support plans for funeral homes designated for national disaster preparedness.