• Proceedings of the KSRS Conference
• /
• v.1
• /
• pp.188-190
• /
• 2006

A multistage hierarchical clustering technique, which is an unsupervised technique, was suggested in this paper for classifying large remotely-sensed imagery. The multistage algorithm consists of two stages. The local segmentor of the first stage performs regiongrowing segmentation by employing the hierarchical clustering procedure of CN-chain with the restriction that pixels in a cluster must be spatially contiguous. This stage uses a sliding window strategy with boundary blocking to alleviate a computational problem in computer memory for an enormous data. The global segmentor of the second stage has not spatial constraints for merging to classify the segments resulting from the previous stage. The experimental results show that the new approach proposed in this study efficiently performs the segmentation for the images of very large size and an extensive number of bands

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.5
• /
• pp.1-10
• /
• 1998

In this paper, a new hardware-software patitioning algorithm is presented, in which the system behavioral description containing a mixture of hardware and softwae components is partitioned into the hardware part and the software part. In this research, new techniques to optimally partition a mixed system under certain specified constaints such as performance, area, and delay, have been developed. During the partitioning process, the overhead due to the communication between the hardware and software parts are considered. New featues have been added to adjust the hierarchical level of partitioning. Power consumption, memory cost, and the effect of pipelining can also be considered during partitioning. Another new feature is the ability to partition a DSP system under throughput constraints. This feature is important for real time processing. The developed partitioning system can also be used to evaluate various design alternatives and architectures.

• 전기의세계
• /
• v.30 no.6
• /
• pp.375-385
• /
• 1981

New algorithms are derived for nonlinear programming problems which are characterized by their large variables and equality and inequality constraints. The algorithms are based upon the introduction of the Dependent-Variable-Elimination method, Independent-Variable-Reduction method, Optimally-Ordered-Triangular-Factorization method, Equality-Inequality-Sequential-Satisfaction method, etc. For a case study problem relating to the optimal determination of load flow in a 10-bus, 13-line sample power system, several approaches are undertaken, such as SUMT, Lagrange's Multiplier method, sequential applications of linear and quadratic programming method. For applying the linear programming method, the conventional simplex algorithm is modified to the large-system-oriented one by the introduction of the Two-Phase method and Variable-Upper-Bounding method, thus resulting in remarkable savings in memory requirements and computing time. The case study shows the validity and effectivity of the algorithms presented herein.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.126-133
• /
• 2014

This paper addresses order-lot pegging issues in the supply chain of a semiconductor business. In such a semiconductor business (memory or system LSI) order-lot pegging issues are critical to achieving the goal of ATP (Available to Promise) and on-time production and delivery. However existing pegging system and researches do not consider capacity limit on bottleneck steps. This paper presents an order-lot pegging algorithm for assigning a lot to an order considering quality constraints of each lot and capacity of bottleneck steps along the entire FAB. As a result, a quick and accurate response can be provided to customer order enquiries and pegged lot lists for each promised orders can be shown transparently and short or late orders can be detected before fixing the order.

• International Journal of CAD/CAM
• /
• v.8 no.1
• /
• pp.41-44
• /
• 2009

This paper describes an implementation of virtual teeth modeling for a haptic dental simulation. The system allows dental students to practice dental procedures with realistic tactual feelings. The system requires fast and stable haptic rendering and volume modeling techniques working on the virtual tooth. In our implementation, a volumetric implicit surface is used for intuitive shape modification without topological constraints and haptic rendering. The volumetric implicit surface is generated from input geometric model by using a closest point transformation algorithm. And for visual rendering, we apply an adaptive polygonization method to convert volumetric teeth model to geometric model. We improve our previous system using new octree design to save memory requirement while increase the performance and visual quality.

• Information and Communications Magazine
• /
• v.10 no.10
• /
• pp.22-29
• /
• 1993

This paper describes development of a real-time voice recognition dialing system which can recognize around one hundred word vocabularies in speaker independent mode. The voice recognition algorithm is implemented on a DSP board with a telephone interface plugged in an IBM PC AT/486. In the DSP board, procedures for feature extraction, vector quantization(VQ), and end-point detection are performed simultaneously in every 10msec frame interval to satisfy real-time constraints after the word starting point detection. In addition, we optimize the VQ codebook size and the end-point detection procedure to reduce recognition time and memory requirement. The demonstration system is being displayed in MOBILAB of Korea Mobile Telecom at the Taejon EXPO '93.

• Journal of Information Technology and Architecture
• /
• v.9 no.1
• /
• pp.11-19
• /
• 2012

Generally, a suffix tree is an efficient data structure since it reveals the detailed internal structures of given sequences within linear time. However, it is difficult to implement a suffix tree for a large number of sequences because of memory size constraints. Therefore, in order to compare multi-mega base genomic sequence sets using suffix trees, there is a need to re-construct the suffix tree algorithms. We introduce a new method for constructing a suffix tree on secondary storage of a large number of sequences. Our algorithm divides three files, in a designated sequence, into parts, storing references to the locations of edges in hash tables. To execute experiments, we used 1,300,000 sequences around 300Mbyte in EST to generate a suffix tree on disk.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.26-39
• /
• 2017

The need for embedded devices to be able to exchange information with each other and with data centers is essential for the advent of the Internet of Things (IoT). Several existing communication protocols are designed for small devices including the message-queue telemetry transport (MQTT) protocol or the constrained application protocol (CoAP). However, most of the existing implementations are convenient for computers or smart phones but do not consider the strict constraints and limitations with regard resource usage, portability and configuration. In this paper, we report on an industrial research and development project which focuses on the design, implementation, testing and deployment of a MQTT module. The goal of this project is to develop this module for platforms having minimal RAM, flash code memory and processing power. This software module should be fully compliant with the MQTT protocol specification, portable, and inter-operable with other software stacks. In this paper, we present our approach based on abstraction layers to the design of the MQTT module and we discuss the compliance of the implementation with the requirements set including the MISRA static analysis requirements.

• Journal of Applied Reliability
• /
• v.18 no.2
• /
• pp.122-129
• /
• 2018

Purpose: This article develops an optimal reliability acceptance sampling plan for the case where the degradation quantity of the performance characteristic follows Weibull distribution. Method: For developing reliability acceptance sampling plans, the sample size and the acceptance constant are determined based on the accelerated characteristic of the test condition and the product. Results: The sample size and the acceptance constant are provided such that the constraints of the producer and the consumer risks are satisfied. Conclusion: Reliability acceptance sampling plans based on the accelerated degradation test method can be used for the quality control within a resonable amount of cost and time. In this article. an optimal reliability sampling plans are newly developed for this purpose.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.6B
• /
• pp.233-248
• /
• 2008

Advances in electronics and wireless communication technologies have enabled the development of large-scale wireless sensor networks (WSNs). There are numerous applications for wireless sensor networks, and security is vital for many of them. However, WSNs suffer from many constraints, including low computation capability, small memory, limited energy resources, susceptibility to physical capture, and the lack of infrastructure, all of which impose unique security challenges and make innovative approaches desirable. In this paper, we present a survey on security issues in wireless sensor networks. We address several network models for security protocols in WSNs, and explore the state of the art in research on the key distribution and management schemes, typical attacks and corresponding countermeasures, entity and message authentication protocols, security data aggregation, and privacy. In addition, we discuss some directions of future work.