• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(I)
• /
• pp.295-298
• /
• 2005

Coupled shear wall(CSW) has been adopted as a lateral force resisting system in building frame structures. New Zealand code recommends the capacity design in designing the CSW. Capacity design based on using moment redistribution of member force may provide the economical benefit to designer. In this study, CSW's are designed by both capacity design and strength -based design. The design results and the seismic performance are compared by using nonlinear static analyses. The amount of reinforcement of shear wall and the section area of steel coupling beams by capacity design appear to be reduced by 19$\%$ and 17$\%$, respectively. Also CSW designed by capacity design shows good seismic performance at the ultimate state.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.169-170
• /
• 2009

CFT 구조는 강재 또는 철근콘크리트로 이루어진 일반 구조용 부재와 비교해서 많은 이점을 가진다. 강재 박스와 콘크리트의 구속효과에 의한 전체구조물의 연성도, 강성 및 하중지지능력의 증가 때문에 CFT 구조는 기둥 부재에 광범위하게 적용되고 있다. 이러한 CFT 구조의 장점들 때문에 최근들어 CFT 부재는 거더부재로 교량구조물에 확대 적용되고 있다. 본 연구의 목적은 CFT 구조, 아치형상 및 긴장재로 이루어진 CFTA 거더교의 해석모델을 개발하고 이를 적용한 설계법을 제안하기 위함이다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1988년도 가을 학술발표회 논문집
• /
• pp.55-60
• /
• 1988

This paper concentrates on the development of simplified and effective algorithm for optimum reinforced concrete(RC) member design. After constructing the data base of predetermined RC sections which are arranged in the order of increasing resistant capacity. Then, the relationship between the section identification numbers and resistant capacities of sections is estabilished by regression and it can be used to obtain the initial solution(section) which satisfies the design constraints imposed. Assuming that there exists the optimum section near the initially selected one, the direct search is conducted to find the discrete optimum solution. The optimization of the entire structure is accomplished through the individual member optimization.

• 한국산업융합학회 논문집
• /
• 제9권3호
• /
• pp.183-190
• /
• 2006

Generally, application of steel pile as deep foundation member needs specials requirement for the connection method between steel pipe and concrete footing. To investigate real compressive behavior of connection member between steel pipe pile and concrete footing, three specimens were tested with carefully designed experimental system. Main test variable is the connection method between steel pipe pile and concrete footing. The bolted bonding method and hook bonding method was considered as the connection method in this study. From the test results gained from experiment, it was conformed that two types of connection method have the almost same compressive resistance capacity. Therefore, we can conclude that these two connection methods can be used as the strengthening method to verify the compressive composite action of concrete and steel pipe pile.

• 소성∙가공
• /
• 제12권4호
• /
• pp.320-327
• /
• 2003

This paper is concerned with forming analysis of Front Side Members and effects of the forming analysis on crash analysis of an auto-body. For efficient forming analysis, equivalent draw-bead restraining forces are calculated with ABAQUS/Standard and then used as the boundary condition in forming simulation. In order to demonstrate the validity of the forming analysis, the thickness variation in the numerical simulation result is compared quantitatively with the one in the real product. Forming histories obtained kom the forming analysis are utilized as the initial condition of the crash analysis for accurate assessment of the crashworthiness. Crashworthiness such as the load-carrying capacity, crash mode and the energy absorption is evaluated and investigated for the identification of forming effects.

• Steel and Composite Structures
• /
• 제43권4호
• /
• pp.447-456
• /
• 2022

Recent experimental studies showed that deep steel I-shaped profiles classified as high ductility class sections in seismic design international codes exhibit low deformation capacity when subjected to cyclic loading. This paper presents an innovative retrofit solution to increase the rotation capacity of beams using bonded carbon fiber reinforced polymers (CFRP) patches validated with advanced finite element analysis. This investigation focuses on the flexural cyclic behaviour of I-shaped hot rolled steel deep section used as beams in moment-resisting frames (MRF) retrofitted with CFRP patches on the web. The main goal of this CFRP reinforcement is to increase the rotation capacity of the member without increasing the overstrength in order to avoid compromising the strong column-weak beam condition in MRF. A finite element model that simulates the cyclic plasticity behavior of the steel and the damage in the adhesive layer is developed. The damage is modelled using the cohesive zone modelling (CZM) technique that is able to capture the crack initiation and propagation. Details on the modelling techniques including the mesh sensitivity near the fracture zone are presented. The effectiveness of the retrofit solution depends strongly on the selection of the appropriate adhesive. Different adhesive types are investigated where the CZM parameters are calibrated from high fidelity fracture mechanics tests that are thoroughly validated in the literature. This includes a rigid adhesive commonly found in the construction industry and two tough adhesives used in the automotive industry. The results revealed that the CFRP patch can increase the rotation capacity of a steel member considerably when using tough adhesives.

• 수산경영론집
• /
• 제37권1호
• /
• pp.1-24
• /
• 2006

Reducing fishing capacity is one of current issues in the international fisheries. This is because that increased fishing capacity has caused not only fish stocks to be depleted, but also additional fishing costs to be incurred, which resulted in reduction of economically viability of fisheries. For this reason, FAO adopted the International Plan of Action for the Management of Fishing Capacity' in 1999 and recommended member countries to estimate fishing capacity and to implement the policy to reduce fishing capacity. This study is aimed to measure fishing capacity of the Large Purse Seines Fishery that is one of offshore fisheries in Korea using both Peak - to - Peak Analysis and Data Envelopment Analysis in order to provide a policy information for preparation of domestic plan of action for the management of fishing capacity. The results of PTP Analysis were almost similar to those of DEA Analysis. The DEA results showed that the capacity utilization in 2004 was about 75%, it was obvious the capacity did not utilize enough. The sensitivity analysis on DEA results indicated that 24% of the number of ships, 26% of the tonnages, or 29% of the horse powers should be reduced if the present catch remained. In addition, if the catch remains at the MSY base level of large purse seines, the analysis suggested that the number of ships, tonnages and horse powers should be reduced by 15%, 18%, and 21% respectively.

• 한국지반공학회지:지반
• /
• 제13권3호
• /
• pp.77-86
• /
• 1997

여러층의 지오그리드로 보강된 포화된 점토질지반에 띠기초의 극한 지지력에 대한 실내모형 실험결과를 제시하였다. 최대 극한지지력을 유발하는데 필요한 최적 보강길이와 보강심도, 첫번 째층의 지오그리드 보강심도를 도출하였다. 모형실험결과를 바탕으로 극한 지지력을 도출할 수 있는 준경험 방정식을 제시하였다.

• 한국안전학회지
• /
• 제28권4호
• /
• pp.97-102
• /
• 2013

This paper presents a new strengthening method of underground box structures against seismic loads for anti-seismic capacity improvement. A threaded steel member with pressure devices(so called 'I-bracing pressure system') is used to improve seismic capacity of the RC box structure. The I-bracing pressure system is fixed the corner of opening after chemical anchor was installed by drilling hole on the box structure. The structural performance was evaluated analytically. Two bracing types of strengthening methods were used; conventional bracing method and improved I-bracing pressure system. For the performance evaluation, seismic analyses were performed on moment and shear resisting structures with and without I-bracing pressure system. Numerical results confirmed that the proposed I-bracing pressure system can enhance the seismic capacity of the underground RC box structures.

• Steel and Composite Structures
• /
• 제8권1호
• /
• pp.53-83
• /
• 2008

A rational and efficient seismic design methodology for irregular space steel frames using advanced methods of analysis in the framework of Eurocodes 8 and 3 is presented. This design methodology employs an advanced static or dynamic finite element method of analysis that takes into account geometrical and material non-linearities and member and frame imperfections. The inelastic static analysis (pushover) is employed with multimodal load along the height of the building combining the first few modes. The inelastic dynamic method in the time domain is employed with accelerograms taken from real earthquakes scaled so as to be compatible with the elastic design spectrum of Eurocode 8. The design procedure starts with assumed member sections, continues with the checking of the damage and ultimate limit states requirements, the serviceability requirements and ends with the adjustment of member sizes. Thus it can sufficiently capture the limit states of displacements, rotations, strength, stability and damage of the structure and its individual members so that separate member capacity checks through the interaction equations of Eurocode 3 or the usage of the conservative and crude q-factor suggested in Eurocode 8 are not required. Two numerical examples dealing with the seismic design of irregular space steel moment resisting frames are presented to illustrate the proposed method and demonstrate its advantages. The first considers a seven storey geometrically regular frame with in-plan eccentricities, while the second a six storey frame with a setback.