• 접착 및 계면
• /
• 제10권2호
• /
• pp.84-89
• /
• 2009

The objective of this research was to investigate the curing behavior and adhesion performance of urea-melamine-formaldehyde (UMF) resin for the four types of UMF-1, UMF-2, UMF-3, and UMF-4 which synthesized by the staged addition of melamine. Also, various network structures of these resin types were discussed based on their different curing behavior and adhesion performance. The curing behavior was evaluated by DMTA and thermal stability was checked by TGA. Adhesion performance was evaluated by dry and wet shear strengths and the pH value of each cured resin was checked to see its effect on the adhesion performance. The results indicated that the UMF-1 resin type by the addition of melamine initially with the urea and formaldehyde at the same F/(U+M) rate showed the lowest thermal stability, rigidity (${\Delta}E^{\prime}$), temperature of tan ${\delta}$ maximum ($T_{tan}\;_{\delta}$), and wet shear strength, and pH value of cured resin. In wet shear strength, however, the UMF-4 resin type appears to be slightly higher than UMF-1 resin type.

• 한국염색가공학회지
• /
• 제9권4호
• /
• pp.1-6
• /
• 1997

Water repellent finish was carried out using water repellent agent(AG-480), melamine resin(Sumitex Resin MK), and catalyst(Sumitex Accelerator ACX). PET/nylon fabrics were treated with melamine resin by pad-dry-cure method and subsequently washed and dried. Durable water repellency was controlled by the melamine resin and catalyst. Water repellency was tested by spray rating method and durability of water repellency were measured by launder-O-meter and pilling tester. The optimum conditions of durable water repellent finish for new synthetic fabric were as follows; concentration of water repellent finishing agent 20g/l; concentration of melamine & catalyst 0.5g/l; curing condition $160^{\circ}$ ${\times}$ 30sec. Water repellency after washing and rubbing is improved by melamine resin and catalyst.

• Journal of the Korean Wood Science and Technology
• /
• 제12권1호
• /
• pp.38-43
• /
• 1984

Water soluble urea-melamine-phenol copolymer adhesive manufactured with 80 percent of urea resin contents was manufactured by different molar ratio for a high temperature curing type, and their properties and strengthes were examined through manufactures of plywood with Kapur (Dryobalanops spp.) veneers. The results are summarized as follows: 1. Specific gravities of air dried plywood manufactured from each adhesive ranged from 0.78 to 0.84 and their moisture contents met the KS requirement. 2. In dry and wet shear strength, $U_{80}M_{10}P_{10}$ copolymer resin showed the highest value and urea resin was the lowest, indicating that melamine and phenol were effective for increasing glue shear strength of urea resin. 3. In case of glue shear strength after boiling test, phenolic resin was the nest and melamine was not so effective as phenol on reinforcement of boiling water resistance of urea resin.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.75-78
• /
• 2003

This study is to investigate the probability to develop the AE Water-reducing agent which can decrease the bleeding by mixing melamine type super-plasticizer(SP) and methyl cellulose(MC) viscosity agent. According to the result, as the mixing ratio of melamine type SP and MC viscosity agent increases, the bleeding is reduced due to a increase of the air content. When the mixing ratio of melamine type SP and MC viscosity agent is 1:2 and 1;3 at the water content of 165kg/$m^3$ and 175kg/$m^3$ respectively, slump and air content are satisfied and bleeding is reduced to some extent, so this is determined as the mixing ratio of AE water reducing agent for reduction of bleeding. It is prove that the developed AE water reducing agent for reduction of bleeding can reduce the amount of bleeding and prohibit the plastic shrinkage crack by slowing down the bleeding speed. Compressive strength of hardened concrete does not make any difference in comparison with plain concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1242-1247
• /
• 2000

Results from a study on the effect of the chemical agent on the flowing and setting properties of high flowing.high strength concrete using blast-furnace slag are presented in this paper. The flowing and setting properties of concrete are investigated by slump, slump-flow, flowing velocity, L-flow, velocity of V-funnel, L-spatial passability and setting time. In addition, kinds of chemical agent were composed of naphthalene type, of naphthalene and melamine and melamine type. The results indicate that dispersive capacity can be increased by naphthalene composition. Also, it shows that viscosity and early strength can be increased by melamine composition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.415-418
• /
• 2005

Nowadays the three major commercially available of organic chemical admixtures are modified lignosulfonates(LS), sulfonated naphthalene-formaldehyde resins (SNF) and sulfonated melamine-formaldehye (SMF). In this study, various sulfonated melamine-formaldehyde (SMF) superplasticizers were synthesized via four synthetic steps. Hydroxymethylation (Step 1), Sulfonation (Step 2), Polymerization (Step 3) and Neutralization and Stabilization (Step 4). In this synthesis of SMF, reaction conditions such as the mole ratio of melamine to formaldehyde and the amount of acid catalyst were changed. After application of SMF superplasticizer to cement paste and mortar, the physical properties including workability, slump loss, compressive strength were compared.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.457-460
• /
• 2008

최근의 콘크리트 기술은 시멘트 제조기술의 발전 보다는 화학 혼화제의 기술발전에 의하여 성장하였다. 현재, 콘크리트 산업에 주로 사용되고 있는 4가지 화학 혼화제로서 변형된 리그닌(LS), 나프탈렌계(SNF), 멜라민계(SMF) 및 폴리카르복실레이트계(PC)계가 있다. 본 연구에서는 SMF계 고유동화제를 멜라민과 포르말린의 몰비를 변화 시키며 4단계로 나누어 반응을 진행시켰다. 합성된 SMF계 고유동화제를 시멘트 콘크리트에 적용하여 작업성, 슬럼프 손실 및 압축강도를 SNF와 비교하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.741-744
• /
• 2003

In this study, the influence of chemical admixture on early strength development of concrete is discussed. According to the results, fluidity with variation of kinds of chemical admixture is lower in the case of acceleration type than in the case of normal type. Setting time of naphthalene acceleration type is shortened by I hour, and that of melamine is nearly same, but that of polycarbonic acid is somewhat retarded in comparison with that of naphthalene normal type. Early compressive strength gains 5MPa in about 18hours regardless of the kinds of chemical admixture. But as time elapses, compressive strength is higher in order of polycarbonic acid, naphthalene and melamine type. The relativity between compressive strength and the rebound value of P-type schmidt hammer is also favorable at early age, and compressive strength of 5MPa is estimated at the rebound value of 22.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.921-924
• /
• 2000

The purpose of this paper is to investigate the effects of admixture such as AE water reducing agent and Flyash on properties of cement mortar for floor. As for the effects of AE water reducing agent kinds, fluidity and air content increase in order for melamine type, lignine type and naphtalene type. As Flyash contents increase, fluidity shows high, but air content shows decline tendency. compressive strength according to AE water reducing agent kinds increase in order for melamine type, lignine type and naphtalene type. As AE water reducing agent content increases, it shows to be decreased. As for the effects of Flyash, it retards at early age but at later age it gains high with increase of Flyash contents due to pozzanic reaction. Drying shrinkage shows to be docreased slightly with increase of AE water reducing agent.

• 한국산림과학회지
• /
• 제30권1호
• /
• pp.19-29
• /
• 1976

습식(濕式) 경질섬유판(硬質纖維板) 제조(製造)를 위(爲)한 보강용(補强用) 사이징제(劑)로서 실험실(實驗室) 제조(製造) 석탄산수지(石炭酸樹脂), 요소수지(尿素樹脂)(음(陰)이온 형(型), 양(陽)이온 형(型)), 요소(尿素) 메라민 공축합수지(共縮合樹脂)와 일본(日本) M사(社)의 변성(變性)메라민수지(樹脂)(P-6100)와 변성(變性) 양(陽)이온형(型) 요소수지(尿素樹脂)(P-1500)등을 사용(使用)하여 섬유판(纖維板) 재질(材質)에 미치는 영향(影響)을 검토(檢討)하였다. 공시재(供試材)는 라왕(20%)+소나무(80%)로 사용(使用)하였고 침착제(沈着劑)는 황산알미늄을 사용(使用)하였으며 열압조건(熱壓條件)은 전기가열(電氣加熱) 푸레스로 $180^{\circ}C$, $50-6-50kg/cm^2$, 시간(時間)은 1-2-7분(分)으로 S-1-S 경질섬유판(硬質纖維板)을 제조(製造)하여 일주일 기건(氣乾)시킨 후(後) 그 성질(性質)을 조사(調査)한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 섬유판(纖維板)의 비중(比重)은 각(各) 보강제(補强劑)의 처리량(處理量)에 따른 비중(比重)의 차(差)는 없으나 보강제(補强劑) 간(間)에는 고도(高度)의 유의차(有意差)가 있어 변성(變性)메라민수지(樹脂)가 제일 높고 양(陽)이온형(型), 음(陰)이온형(型) 및 요소(尿素) 메라민 공축합수지(共縮合樹脂)가 중간(中間)이며 석탄산수지(石炭酸樹脂)가 제일 낮았다. 2. 섬유판(纖維板)의 함수율(含水率)은 보강제(補强劑) 간(間)의 차(差)와 보강제(補强劑) 처리량(處理量)에 따른 함수율(含水率)의 차(差)가 전부(全部) 유의성(有意性)이 있었으며 전체적(全體的)으로 처리량(處理量)이 증가(增加)할 수록 함수율(含水率)은 떨어지나 2%와 3% 처리(處理) 간(間)의 함수율(含水率) 차(差)는 없었다. 3. 섬유판(纖維板)의 흡수율(吸水率)은 보강제(補强劑) 간(間) 및 파라핀 왁스유탁액(乳濁液) 처리량(處理量) 간(間) 모두 다 유의차(有意差)를 보이고 있다. 파라핀 왁스유탁액(乳濁液) 처리량(處理量)을 늘일수록 흡수율(吸水率)은 떨어져 내수성(耐水性)이 증가(增加)함을 보이고 있으며 P-6100 및 P-1500은 무처리(無處理)에도 표준규격(標準規格)을 만족시켜 주며 음(陰)이온형(型) 요소수지(尿素樹脂), 양(陽)이온형(型) 요소수지(尿素樹脂), 요소(尿素) 메라민 공축합수지(共縮合樹脂)의 산(酸)콜로이드는 내수제(耐水劑)를 1% 요구하고 석탄산수지(石炭酸樹脂)는 2%에 합격(合格)되고 있었다. 4. 섬유판(纖維板)의 곡강도(曲强度)는 보강제(補强劑) 간(間) 및 보강제(補强劑) 처리량(處理量) 간(間)에 모두 유의차(有意差)가 있으며 처리량(處理量)이 증가(增加)할 수록 곡강도(曲强度)는 증가(增加)하였다. P-6100이 가장 곡강도(曲强度)가 높고 P-1500, 양(陽)이온형(型) 및 음(陰)이온형(型) 요소수지(尿素樹脂), 요소(尿素) 메라민 공축합수지(共縮合樹脂)의 산(酸)콜로이드등(等)이 중간(中間)이며, 석탄산수지(石炭酸樹脂)가 곡강도(曲强度)는 제일 낮았다. 5. 섬유판(纖維板)의 품질(品質)과 경제적(經濟的)인 면(面)을 고려한다면 석탄산수지(石炭酸樹指)의 대체(代替)로서 산(酸)콜로이드 방법(方法)에 의한 요소(尿素) 메라민 공축합수지(共縮合樹脂)와 양(陽)이온형(型) 요소수지(尿素樹脂)를 사용(使用)하는 것이 가장 바람직하며 이들 변성수지(變性樹脂)에 대(對)한 개선(改善) 연구(硏究)가 계속 필요(必要)하다 하겠다.