• 디지털융복합연구
• /
• 제14권12호
• /
• pp.55-63
• /
• 2016

FTA와 비즈니스 모델이 상호 얽히고 있는 융복합산업환경에서 최근 FTA는 두 국가의 협정을 넘어 경제권역간의 소위 Mega FTA의 양상을 띠고 있다. 한국은 52개국과 15건의 FTA가 발효됨으로써 미국뿐만 아니라 ASEAN, OECD 회원국 대부분과 모두 FTA 네트워크를 완성하여 이제는 이러한 FTA를 활용하는 것이 한국 경제의 성과를 결정하는 시점에 와 있다. 본 논문은 FTA 활용에 대한 선행연구 검토와 중소기업의 FTA 활용현황과 문제점을 분석하고, FTA 활용도 향상을 위한 중소기업의 원산지관리전문인력 양성방안으로 효과적인 원산지관리 지원체계 구축, FTA 원산지관리 역량강화, FTA 지원제도의 운용 내실화, 원산지관리 담당자의 실무역량 강화 등을 모색함으로써 디지털융복합시대 향후 FTA 활용정책에 시사점을 제공하고자 한다.

• 한국건설관리학회논문집
• /
• 제15권4호
• /
• pp.30-38
• /
• 2014

시공성에 대한 연구는 활발히 진행되어 왔으며 시공성이 공기, 원가, 품질, 생산성을 높인다고 다양한 연구에서 언급하고 있다. 그러나 실제 시공성이 생산성에 미치는 영향을 정량적으로 분석한 연구는 사례조사나 설문을 통한 결과가 대부분이여서 미흡한 실정이다. 또한 시공성에 관한 연구가 세부 특정 공정의 시공성을 높이기 위한 것들이 대부분이여서 다양한 공종에 적용하기에는 다소 hard하다고 할 수 있다. 따라서 본 논문은 시공성에 영향을 주는 인자들을 도출하고 이 요인들이 각 공종의 시공성에 미치는 영향도를 분석한 후 실제 공사 데이터를 가지고 시공성 요인이 생산성에 미치는 영향을 검증하여 기존 연구에 대한 뒷받침이 되고자 한다.

• The Journal of Advanced Prosthodontics
• /
• 제13권6호
• /
• pp.343-350
• /
• 2021

PURPOSE. The success of an implant-prosthetic rehabilitation is influenced by good implant health and an excellent implant-prosthetic coupling. The stability of implant-prosthetic connection is influenced by the rotational tolerance between anti-rotational features on the implant and those on the prosthetic component. The aim of this study is to investigate the rotational tolerance of a conical connection implant system and its titanium abutment counterpart, in various conditions. MATERIAL AND METHODS. 10 preparable titanium abutments, having zero-degree angulation (MegaGen, Daegu, Korea) with an internal 5-degree conical connection, and 10 implants (MegaGen, Daegu, Korea) were used. Rotational tolerance between the connection of implant and titanium abutments was measured through the use of a tridimensional optics measuring system (Quick Scope QS250Z, Mitutoyo, Kawasaki, Japan) in the as-received condition (Time 0), after securing with a titanium screw tightening at 35 Ncm (Time 1), after tightening 4 times at 35 Ncm (Time 2), after tightening one more time at 45 Ncm (Time 3), and after tightening another 4 times at 45 Ncm (Time 4). RESULTS. The group "Time 0" had the lowest values of rotational freedom (0.22 ± 0.76 degrees), followed by the group Time 1 (0.46 ± 0.83 degrees), the group Time 2 (1.01 ± 0.20 degrees), the group Time 3 (1.30 ± 0.85 degrees), and the group Time 4 (1.49 ± 0.17 degrees). CONCLUSION. The rotational tolerance of a conical connection is low in the "as received" condition but increases with repetitive tightening and with application of a torque greater than 35 Ncm.

• 무역학회지
• /
• 제41권2호
• /
• pp.123-157
• /
• 2016

WTO·DDA 협상의 난항으로 FTA가 무역관련 규칙제정에 있어 주도적인 역할을 하고 있다. FTA 체결에 따른 이점의 하나는 GVC의 확대를 활성화시키는 잠재성에 있다. FTA는 GVC의 발전을 위해 대개의 필요한 정책상의 조치를 커버하기 때문에 이러한 목적을 달성하기에 적절한 수단이다. FTA는 글로벌 경제에 있어 GVC 운영자에게 무역장벽을 완화해 주는 역할을 한다. FTA는 즉시 관세를 경감하는 것은 아니지만 통관이나 무역원활화 조치를 가속화함으로써 비용을 경감할 수 있다. 대개의 선도적 FTA에서는 상대국에 GVC를 활성화시킬 수 있는 규제상의 조화와 같은 새로운 특성을 지속적으로 추가하고 있다. 최근 WTO와 OECD 등에서도 GVC에 대한 연구가 증가하고 있어, 무역에 대한 새로운 시각을 제공하고 있다. 본 연구에서는 FTA 확대에 따른 GVC의 활성화 방안을 도출하기 위해 최근 GVC에 대한 선행연구를 바탕으로 중소기업의 GVC 편입을 위한 글로벌 경쟁력 방안을 제시하고 있다.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제1권1호
• /
• pp.69-78
• /
• 1995

This study is intended to understand the architectural characteristics and trends of general hospitals in Europe. The Observations, interviewes with the staff, and analyses of related materials were executed through the study-visits of sample hospitals. Some results of the study could be summarized as follows : (1) The architectural characteristics of sample hospitals could be described as the realization of horizontal design concept, application of urban design method, specialization of service departments, intergration of facility design, and planning for the emergency & disaster. (2) The architectural trends of sample hospitals could be suggested as the decentralization of functions, promotion of building standard, enhancement of interior space, consideration of environment, and autonomous management & operation of facilities. (3) The humanistic and environmental approaches from european hospitals would be preferably applicable rather than the popular concept of automation, ultra-modernization and mega-structure in Korea. First of all, the bed-center and proper facilities for disaster should be considered.

• 국제초고층학회논문집
• /
• 제4권4호
• /
• pp.241-247
• /
• 2015

In this study, an approximate computer-based method was developed to analyze the behavior of raft and piled raft foundations. Special attention is given to the improved analytical method proposed by considering raft flexibility and soil nonlinearity. The overall objective of this study is to focus on the application of a simplified analysis method for predicting the behavior of sub-structures. Through the comparative studies, it is found that the computer programs (YS-MAT and YSPR), developed in this study, is in agreement with the general trends observed by field measurements. Therefore, YS-MAT (Yonsei-Mat) and YSPR (Yonsei Piled Raft) can be effectively used for the preliminary design of a raft or a piled raft foundation for high-rise buildings.

• 천문학회보
• /
• 제39권2호
• /
• pp.39-39
• /
• 2014

Studies of compact radio sources since the discovery of quasars have revealed a variety of physical properties: both in morphology and kinematics from sub-parsec to Mega-parsec scales, radiation mechanisms at frequencies from the radio to ${\gamma}$-rays, theoretical models for relativistic jets, etc. The frontier discovery of Very Long Baseline Interferometry (VLBI) observations for the compact extragalactic radio sources have triggered the extensive studies to investigate the underlying physics of the relativistic jets. In this context, the highest resolution VLBI surveys of ultra-compact radio sources provide the potentially important statistical basis for future study. As a tool of this study, a new millimeter VLBI network in Korea, the Korean VLBI Network (KVN) will paly an important role. We present results from large VLBI surveys of compact radio sources at millimeter wavelengths and discuss the prospects with the KVN on this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.420-429
• /
• 2009

This study concerns bearing capacity of shallow and deep foundations on jointed rock mass. The main focus of this research lies on getting insight into the applicability of bearing capacity estimation methods developed by other researchers. First, an extensive literature review was performed on previous studies concerning bearing capacity of foundation on jointed rock mass. Second, a parametric study on a number of jointed rock conditions using the finite-element analysis. The results of the analysis were then compared with those computed by the bearing capacity estimation method.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1294-1299
• /
• 2009

Best value in value engineering has relation to cost and performance. But a severe problem in VE study of a project is to reduce value due to loss of performance, caused by focusing on cost reduction. Also a lack of understanding performance concept, no trial VE workshop as well as cost saving-based policy have not satisfied customer needs. A efficient and practical methodology for accomplishing best value in construction projects is proposed. This study developed a more objective approach for performance measurement approach of mega projects and suggested a systematic process of performance quantitative analysis verifying value improvement. The proposed performance measurement method would be very useful for better communication and consensus between stakeholders and VE team especially through value engineering.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제15권2호
• /
• pp.137-143
• /
• 2007

Lactate dehydrogenase (LDH) is a ubiquitous enzyme that plays a significant role in the clinical diagnosis of pathologic processes. Discovery of the LDH (BmLDH) gene in B. mori may shed light on its role in the biology of Lepidoptera species, and afford further understanding of the function of the enzyme. In this study, we used the bioinformatics tools to identify LDH gene in B. mori. Sequence analysis showed that BmLDH cDNA contains a 996 bp open reading frame, encoding 331 AA proteins, with seven introns. Compared with hHLDH (human heart LDH), BmLDH contained the same key active sites. Domain search and protein fold recognition analyses provide compelling evidences that the deduced protein is a LDH. Using the computer program MEGA3, we conducted a search for homologs of BmLDH among many eukaryotic species and confirmed that the BmLDH was conserved in all organisms investigated. This gene has been registered in GenBank under the accession number EU000385.