• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.4
• /
• pp.193-203
• /
• 2012

In the limitless competition era of the 21st century, cost reduction is being highlighted as one of survival strategies of businesses. The first item for cost reduction of businesses is logistical costs. The most keenly required thing for this is to remove unnecessary elements, and the best way to realize it to cut down processes using automatic facilities. Packing container in logistics is like a facility. This study is intended to analyze reduction of costs, improvement of business process and reduction of working force through standardization of standardization, and logistics effects through improvement of environmental images in enterprises.

• Asia Marketing Journal
• /
• v.19 no.4
• /
• pp.61-85
• /
• 2018

Open innovation is based on a different knowledge landscape, with a different logic about the sources and uses of technologies. It implies that firms increasingly rely on external sources of innovation by emphasizing these ideas and resources. Using datasets from the UK biotechnology industry, this paper explores firms' willingness to participate in open innovation. The results indicate that the switching cost is identified as the direct predictor of the willingness to participate in open innovation. While high commitment based on the trust with partner increases switching costs, IT infrastructure within the firm decreases switching costs to open innovation. Taken together, this research broadens the study on open innovation by applying the switching cost as a medium of knowledge transfer in the biotech industry.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.3
• /
• pp.94-106
• /
• 2008

As populations inhabiting in natural ecosystem are fragmented by artificial barriers and habitats are destructed by development, extinction possibility of species is getting higher. It is necessary to design and to manage conservation areas and corridors considering animals' movement and migration for sustainable species diversity in present circumstances. 'Least-cost modeling' is one commonly employed approach in which dispersal costs are assigned to distinct habitat types and the last-costly dispersal paths among habitat patches are calculated using a geographical information system (GIS). This study aims to design ecological corridor using least-cost path method and to apply it to a regional ecological network considering movability of medium-large size mammals. This study was carried out over the metropolitan area, which has been deforested by rapid urbanization. Nevertheless there is connected with Gangwon province, Baekdudaegan mountain range and DMZ, considered where many forest species can migrate to this region. This study employs such an approach to develop least-cost path models for medium-large size mammals, have inhabited for this entire region. Considering those species, two forest areas as a source of species supply and forest areas more than 1,000ha are selected as focal forest areas. Movement and migration paths from species supply sources to focal forest areas are calculated by applying landscape permeability theory using land cover map, road density map and land slope map. Results showed least-cost paths from species supply sources to focal forest areas on two species. Wildcat and roe deer are different in some least-cost paths caused by their landscape permeability but paths show generally same specifics. The result of considering regional distribution of expected movement and migration paths to regional ecological network, low altitude mountains of western metropolitan area are evaluated important area for species connectivity. In national or regional levels ecological connectivity is essential to promote species diversity and to preserve integrated ecosystem. This study concludes that developing least-cost models from similar empirical data could significantly improve the utility of these tools.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• Journal of Veterinary Clinics
• /
• v.38 no.3
• /
• pp.135-142
• /
• 2021

The aim of this study was to evaluate the contrast effect if a saline flush following low-volume contrast medium bolus improves vascular and parenchymal enhancement using a saphenous vein in abdominal CT for small animals. Six clinically healthy beagle dogs underwent abdominal contrast-enhanced CT. They were divided into nine groups (each group, n = 6), according to the volume of contrast medium 1, 2, and 3 mL/kg, and volume of the saline solution 0, 5, and 10 mL. Dynamic CT scanning was performed at the hepatic hilum level. The maximum contrast enhancement, time to maximum enhancement, and time to equilibrium phase were calculated from the time attenuation curves. Mean attenuation values for all groups were measured in the aorta, portal vein, and liver. After contrast enhancement, grading of image quality regarding surrounding artifacts and evaluation of the hepatic hilum structures was performed. For comparison of the effect of the contrast material and saline solution doses, differences in mean attenuation values between the contrast medium 2 mL/kg without saline flush group and the remaining groups, and between contrast medium 3 mL/kg without saline flush group and the remaining groups, were analyzed for statistical significance. There were no significant differences between with and without saline flushing at the same contrast medium dose groups. There were no significant differences in peak values between the 3 mL/kg dose of contrast medium alone and the 2 mL/kg dose of contrast medium with saline solution flush. However, there was a significant difference in peak values between the 3 mL/kg dose of the contrast medium without the saline flush group and the 2 mL/kg dose of the contrast medium alone group. Grades of the artifacts were not significantly different in the saline flush regardless of the dose of the contrast medium. Using 2 mL/kg of contrast medium with saline solution flush resulted in similar liver parenchyma attenuation, compared with using 3 mL/kg of contrast medium without saline solution flush. In CT evaluation of hepatic parenchymal diseases, using 2 mL/kg of contrast medium with saline solution flush may yield decreased risk of contrast nephropathy and cost-saving.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.3
• /
• pp.31-37
• /
• 2014

"The Law of purchasing policy for market support of small and medium business" was legislated to support small and medium industry by expanding purchase and revised consistently for the activation. And then the government made the public construction direct purchase compulsory about design items designated by president on small and medium business based on this law. However, secureing quality, tardiness and field material staff's heavy duty were arisen from approximately 120 direct market purchase items. The legislative intent of law is in accord with Win-Win growth between major company and small and medium business. However material staff who works in the field based on this law has difficulties with material securing quality, JIT(Just In Time), cost push. This study reclassified procurement items of "the direct market purchase system" reasonably and then suggested performance criteria for evaluation. The suggested result will contribute to vatalize the direct market purchase system.

• Journal of Mushroom
• /
• v.7 no.1
• /
• pp.22-26
• /
• 2009

These experiments were conducted to find the optimum mixing rate of used media for saving the production cost of Flammulina velutipes. The materials for media formation was used needle-leaf tree sawdust, media that finished 1th cultivation of F. velutipes, corncob meal, and rice bran, wheat bran as nutrition source. We inoculated the F. velutipes in 14 kinds of different media types and checked the spawn growth speed, fruit body quality and quantity. Two nutrition agents, which is rice bran and wheat bran, did not affected the incubation period, but the effective stem number, quality and quantity of fruit body was better at rice bran than wheat bran. The quality of fruit body produced at mixed 20% of used media (needle-leaf tree sawdust 60% + used media 20% + rice bran 20%) was similar to control plot (needle-leaf tree sawdust 80% + rice bran 20%), but the yield was improved 10% than control plot 130g. According as the used-media mixing amount increases, quality and quantity of fruit body became low remarkably. Therefore, the optimum mixing amount of used-media was 20% and it increased 10% of fruitbody yield.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.262-267
• /
• 2008

The domestic construction market started to expand steadily since 1970s. The building market which utilizes a sandwich panel with advantages of economical construction expenses and convenient construction has grown rapidly in recent years. However, the companies which specialize in constructing sandwich panels are relatively small or medium size, compared with other construction companies. As a result, studies on the improvement of productivity have not been conducted sufficiently. In this study, the construction sites of sandwich panel are investigated, and the work processes by each team are analyzed. Additionally, the productivity and the construction cost of each construction team are analyzed by constructing a model using the Web-Cyclone. It is expected that the results of this study can be applied to estimate the productivity and the construction cost of a sandwich panel construction that is appropriate for the on-site characteristics of small and medium sized construction companies in Korea. Also, similar processes can be simulated based on the modeling constructed in this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.740-747
• /
• 2004

This research aims at investigating what the determinant factors for the use of web based logistic are and if it enhances the cost reduction and consumer satisfaction for Korean medium sized exporting firms. Furthermore I investigate if there are the interaction effects between the web based logistics and its determining factors on cost reduction and consumer satisfaction. The empirical results show that CEO' s innovativeness, exporting region, exporting share play significant roles in using the web based logistics. Moreover, the web based logistics improve the cost reduction and consumer's satisfaction. The result of two-way variance analysis indicates that there are the interaction effects between CEO's innovativeness, firm size, the activeness of information use and use of the web based logistics on the logistics performances.