• Journal of East-West Nursing Research
• /
• v.7 no.1
• /
• pp.68-81
• /
• 2002

The purpose of this study is to analyze the type of ego states and stress coping style on female college students who are in the course of nursing study. This study is performed in the view of Transactional Analysis and designed to scrutinize descriptive correlations between the type of ego states and stress coping style. The subject is consists of 144 freshmen and sophomore, 138 junior and senior students group, who are students of K nursing college located in Seoul. The sampling investigation period is on Sept. 14, 2002 to Oct. 26, 2002. The measuring instrument used for Transactional Analysis ego state is 50 items Ego-gram research paper devised by Dusay(1997). For studying coping style, Folkman & Lazarus's measurement(1984) was adopted, which is translated and modified by Han, and Oh,(1990). Health states is adopted by standardized health inspecting instrumental table (Cornell Medical Index:CMI) which is designed for Korean people by Ko and Park(1980) Statistic average and standard deviation were generated by using SPSS PC+, t=test and Pearson correlation. The results were as follows: 1) In the type of ego states on both groups indicated the arithmetic apex NP(maximum value), then the point A was high and the data made a down slope to point AC. In the comparison to type of ego states between two groups, only at point CP, the data value of upper year students represented higher than that of lower year ones by c(t=2.28, p=.023). 2) Stress coping style of whole students were highly and affirmatively dedicated to research. Especially hopeful aspect(t=.67, p=.05), relaxation of tension(t=-2.16, p=.03) made significant difference each other in the view of arithmetic calculation. 3) In view of nursing students' physical health states, there is significant difference in past history(t=2.50, p=.013) and in case of mental health states, there are considerable discrepancies between lower group(73.52) and upper group(75.11)(p<.05). In view of all field, state of tension(t=2.13, p=.048) has difference. 4) While verifying coping style in terms of ego states level between lower and upper students group, In type CP, high level ego states group indicated significant difference on stress coping style area than low leveled group and made such sequences as the central point of problem, In type NP, sequences such as the central point of problem, In type A, the central point of problem, In type FC, hopeful aspect and In type AC, hopeful aspect and indifference were derived significantly different (p<.05). 5) While verifying health state differences in the level of lower and upper ego states, In type FC, low level group(150.29) marked higher point than upper group(145.19), there is remarkable discrepancy and so did whole health state(p=.014), In type AC both mental state(p=.000) and whole health state (p=.015) showed differences. 6) When analyzing correlations between whole students' ego states, copying style and health state, all type of ego state showed differences(p<.001). In correlations between ego state and health state, in type FC physical state had an apex and there are inverse correlations among the other types. Especially, type FC showed inverse correlations with great discrepancies(p<.05). In mental state, type NP(${\gamma}=.198$, p<.001) and type A(${\gamma}=.166$, p<.05) represented straight correlations with remarkable differences. Especially, In type AC showed inverse correlations(${\gamma}=.282$, p<.001). In case of correlations between copying style and health state, indifference(${\gamma}=-.157$) and relaxation of tension(${\gamma}=-.158$) presented great difference(p<.05). In mental state, central point of problem and search for social support showed straight correlations with great discrepancies(p<.05), hopeful aspect and indifference showed inverse correlations with considerable differences(p<.001).

• Journal of Biomedical Engineering Research
• /
• v.19 no.1
• /
• pp.59-68
• /
• 1998

Digital hearing aids offer many advantages over conventional analog hearing aids. With the advent of high speed digital signal processing chips, new digital techniques have been introduced to digital hearing aids. In addition, the evaluation of new ideas in hearing aids is necessarily accompanied by intensive subject-based clinical tests which requires much time and cost. In this paper, we present an objective method to evaluate and predict the performance of hearing aid systems without the help of such subject-based tests. In the hearing impairment simulation(HIS) algorithm, a sensorineural hearing impairment medel is established from auditory test data of the impaired subject being simulated. Also, the nonlinear behavior of the loudness recruitment is defined using hearing loss functions generated from the measurements. To transform the natural input sound into the impaired one, a frequency sampling filter is designed. The filter is continuously refreshed with the level-dependent frequency response function provided by the impairment model. To assess the performance, the HIS algorithm was implemented in real-time using a floating-point DSP. Signals processed with the real-time system were presented to normal subjects and their auditory data modified by the system was measured. The sensorineural hearing impairment was simulated and tested. The threshold of hearing and the speech discrimination tests exhibited the efficiency of the system in its use for the hearing impairment simulation. Using the HIS system we evaluated three typical hearing aid algorithms.

• Korea Journal of Hospital Management
• /
• v.9 no.1
• /
• pp.66-94
• /
• 2004

The objective of this study is to examine how to maximize the efficiency of hospital management by minimizing the unit cost of hospital operation. For this purpose, this paper proposes to develop a model of the profit maximization based on the cost minimization dictum using the statistical tools of arriving at the maximum likelihood values. The preliminary survey data are collected from the annual statistics and their analyses published by Korea Health Industry Development Institute and Korean Hospital Association. The maximum likelihood value statistical analyses are conducted from the information on the cost (function) of each of 36 hospitals selected by the random stratified sampling method according to the size and location (urban or rural) of hospitals. We believe that, although the size of sample is relatively small, because of the sampling method used and the high response rate, the power of estimation of the results of the statistical analyses of the sample hospitals is acceptable. The conceptual framework of analyses is adopted from the various models of the determinants of hospital costs used by the previous studies. According to this framework, the study postulates that the unit cost of hospital operation is determined by the size, scope of service, technology (production function) as measured by capacity utilization, labor capital ratio and labor input-mix variables, and by exogeneous variables. The variables to represent the above cost determinants are selected by using the step-wise regression so that only the statistically significant variables may be utilized in analyzing how these variables impact on the hospital unit cost. The results of the analyses show that the models of hospital cost determinants adopted are well chosen. The various models analyzed have the (goodness of fit) overall determination (R2) which all turned out to be significant, regardless of the variables put in to represent the cost determinants. Specifically, the size and scope of service, no matter how it is measured, i. e., number of admissions per bed, number of ambulatory visits per bed, adjusted inpatient days and adjusted outpatients, have overall effects of reducing the hospital unit costs as measured by the cost per admission, per inpatient day, or office visit implying the existence of the economy of scale in the hospital operation. Thirdly, the technology used in operating a hospital has turned out to have its ramifications on the hospital unit cost similar to those postulated in the static theory of the firm. For example, the capacity utilization as represented by the inpatient days per employee tuned out to have statistically significant negative impacts on the unit cost of hospital operation, while payroll expenses per inpatient cost has a positive effect. The input-mix of hospital operation, as represented by the ratio of the number of doctor, nurse or medical staff per general employee, supports the known thesis that the specialized manpower costs more than the general employees. The labor/capital ratio as represented by the employees per 100 beds is shown to have a positive effect on the cost as expected. As for the exogeneous variable's impacts on the cost, when this variable is represented by the percent of urban 100 population at the location where the hospital is located, the regression analysis shows that the hospitals located in the urban area have a higher cost than those in the rural area. Finally, the case study of the sample hospitals offers a specific information to hospital administrators about how they share in terms of the cost they are incurring in comparison to other hospitals. For example, if his/her hospital is of small size and located in a city, he/she can compare the various costs of his/her hospital operation with those of other similar hospitals. Therefore, he/she may be able to find the reasons why the cost of his/her hospital operation has a higher or lower cost than other similar hospitals in what factors of the hospital cost determinants.

• Nuclear Medicine and Molecular Imaging
• /
• v.42 no.6
• /
• pp.469-477
• /
• 2008

Purpose: The goal of this paper is to present the design and performance of a position encoding circuit for $16{\times}16$ array of position sensitive multi-anode photomultiplier tube for small animal PET scanners. This circuit which reduces the number of readout channels from 256 to 4 channels is based on a charge division method utilizing a resistor array. Materials and Methods: The position encoding circuit was simulated with PSpice before fabrication. The position encoding circuit reads out the signals from H9500 flat panel PMTs (Hamamatsu Photonics K.K., Japan) on which $1.5{\times}1.5{\times}7.0\;mm^3$ $L_{0.9}GSO$ ($Lu_{1.8}Gd_{0.2}SiO_{5}:Ce$) crystals were mounted. For coincidence detection, two different PET modules were used. One PET module consisted of a $29{\times}29\;L_{0.9}GSO$ crystal layer, and the other PET module two $28{\times}28$ and $29{\times}29\;L_{0.9}GSO$ crystal layers which have relative offsets by half a crystal pitch in x- and y-directions. The crystal mapping algorithm was also developed to identify crystals. Results: Each crystal was clearly visible in flood images. The crystal identification capability was enhanced further by changing the values of resistors near the edge of the resistor array. Energy resolutions of individual crystal were about 11.6%(SD 1.6). The flood images were segmented well with the proposed crystal mapping algorithm. Conclusion: The position encoding circuit resulted in a clear separation of crystals and sufficient energy resolutions with H9500 flat-panel PMT and $L_{0.9}GSO$ crystals. This circuit is good enough for use in small animal PET scanners.

• Journal of Korean Ophthalmic Optics Society
• /
• v.9 no.2
• /
• pp.455-462
• /
• 2004

In this paper, we measured and analysised the power change of tear lens for 85 patients - 170 myopia eyes - who are fitted using RGP lens, considering the BGR of RGP lens, the corneal astigmatism power, and corneal curvature. We got the following results from these experiments; 1. When the BCR of RGP lens changes, the diopters of tear lens of "on-k", 0.05Pt, 01.0Ft, 0.05St, and 0.10St are -0.25D, -0.46D, -0.63D, +0.07D, and +0.26D, respectively. 2. When the corneal astigmatism power changes, the diopters of tear lens of group below 0.75D, group of 1.00D~1.25D, group of 1.50D~1.75D, and group over 2.00D in "on-k" state, are -0.25D, -0.18D, -0.09D, and -0.39D, respectively. 3. When the corneal astigmatism power changes and the BCR of test lens is changed by 0.05mm step, the change values of tear lens diopter for 0.05St and 0.05Ft approximate to ${\pm}0.25D$, while these for 0.10St and 0.10Ft don't approximate to the value below ${\pm}0.25D$.[are irregular value below ${\pm}0.25D$.] 4. When the corneal curvature and the HCR of RGP lens change, the diopters of tear lens of group below 7.50mm, group of 7.55~7.80mm, group of 7.85~8.20mm, and group over 8.25mm in "on-k" state, are -0.40D, -0.11D, -0.20D, and -0.19D, respectively. 5. When the BCR of test lens is changed by 0.05mm step and the corneal curvature increases, the change values of tear lens diopter decrease, while these over 8.25mm are mean value ${\pm}0.17D$ and the value below ${\pm}0.25D$.

• Korean Security Journal
• /
• no.22
• /
• pp.113-144
• /
• 2010

Bioterrorism is becoming more attractive to terrorist groups owing to the dramatic increase in the utility and lethality of biological weapons in line with today's cutting-edge biological science and technology. The Republic of Korea is facing both internal and external terrorist threats, as well as the possible biological warfare by North Korea. Therefore, it is essential to establish an effective bioterrorism response system in the ROK. In order to come up with the adequate response system for the ROK, an in-depth study has been conducted on the current bioterrorism response system of the U.S. whose preparedness is considered relatively adamant. As a result, the following facts have been found: (1)the legislation with regard to bioterrorism has been established or amended according to the current situation in the U.S., (2)the counter terrorism activities have been integrated with the Department of the Homeland Security as the central agency in order to maximize the national CT capacity, (3)Specific procedures and instructions to cope with bioterrorism have been made into manuals so as to enhance the working-level response capabilities. Next, the analysis on the ROK's bioterrorism response system has been performed in various categories, including the legislation system, task role distribution, cooperative relations, and resource application. It turned out that the ROK's legislation basis is relatively weak and it lacks the apparatus to integrate the bioterrorism response activities on the national level. The shortage of the adequate response facilities and resources, as well as the poor management of manpower have also emerged as problems that hinder the effective CT implementations. Through an analytical and comparative study of the U.S. and the ROK systems, this paper presents several ways to ameliorate improve the current system in the ROK as follows: (1)establish the anti-terrorism law, which would be the basic legal basis for the bioterrorism-related matters; and make revisions to the disaster-related legislation, relevant to bioterrorism response activities, (2)establish an integrated body that has a powerful authority to coordinate the relevant CT agencies; and converge the decentralized functions to maximize the overall response capacity, (3)install the laboratories with a high biosafety level and secure enough of the strategic medical stock-pile, (4)enhance the ability of the inexperienced response personnel by providing with a manual that has detailed instructions.

• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.59-66
• /
• 2004

This paper presents a novel fabrication process for a tapered hollow metallic microneedle array using backside exposure of SU-8, and analytic solutions of critical buckling of a tapered hollow microneedle. An SU-8 meta was formed on a Pyrex glass substrate and another SU-8 layer, which was spun on top of the SU-8 mesa, was exposed through the backside of the glass substrate. An array of SU-8 tapered pillar structures. with angles in the range of $3.1^{\circ}{\sim}5^{\circ}$ was formed on top of the SU-8 mesa. Conformal electrodeposition of metal was carried out followed by a mechanical polishing using a pianarizing polymeric layer. All organic layers were then removed to create a metallic hollow microneedle array with a fluidic reservoir on the backside. Both $200{\mu}m\;and\;400{\mu}m$ tall, 10 by 10 arrays of metallic microneedles with inner diameters of the tip in the range of $33.6{\sim}101\;{\mu}m$ and wall thickness of $10{\mu}m\;-\;20{\mu}m$ were fabricated. Analytic solutions of the critical buckling of arbitrary-angled truncated cone-shaped columns are also presented. It was found that a single $400{\mu}m$ tall hollow cylindrical microneedle made of electroplated nickel with a wall thickness of $20{\mu}m$, a tapered angle of $3.08^{\circ}$ and a tip inner diameter of $33.6{\mu}m$ has a critical buckling force of 1.8 N. This analytic solution can be used for square or rectangular cross-sectioned column structures with proper modifications.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2009

In the past decade, we have observed rapid advances in the development of biochips in many fields including medical and environmental monitoring. Biochip experiments involve immobilizing a ligand on a solid substrate surface, and monitoring its interaction with an analyte in a sample solution. Metal nanoparticles can display extinction bands on their surfaces. These charge density oscillations are simply known as the localized surface plasmon resonance (LSPR). The high sensitivity of LSPR has been utilized to design biochips for the label-free detection of biomolecular interactions with various ligands. LSPR-based optical biochips and biosensors are easy to fabricate, and the apparatus cost for the evaluation of optical characteristics is lower than that for the conventional surface plasmon resonance apparatus. Furthermore, the operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in LSPR research and also describe the LSPR-based optical biosensor constructed with a core-shell dielectric nanoparticle biochip for its application to label-free biomolecular detections such as antigen-antibody interaction.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.115-124
• /
• 2016

The purpose of this paper is to verify improvement of the basic quality of food resources and make the pork legs as the more advanced food products after taking special processing steps with the mixture of traditional medical herbs and hot water extracted coffee meal. The pH level of the pettitoes(Jokbal) showed the highest rate among the control group but it showed no statistical differences in the moisture content between the control and the pettitoes(Jokbal) processed with coffee waste extract as an additional component. In addition, the levels of crude fat and crude ash showed slight increases as the addition of the amount increase. In case of the proteins, however, tendency of slight was decreased but it was not significantly difference as the amount increases. The sodium rate in the pettitoes(Jokbal) was higher in the additional group than in the control group. Texture analysis showed a tendency of wide decrease in the hardness and chewiness depending on amount of the added coffee waste extract. On the other hand, as for the cohesiveness and springiness, there was no significant difference with the control group. In case of the lightness value, as the amount of added coffee waste extract is increased from 10% to 20% and 30%, the 'L' value was reduced significantly compared to that of the control. And the 'a' value was not significantly different compared to the coffee waste extract foil impregnated furniture control. But the 'b' values were significantly increased in accordance with the result of increasing the amount of control is at the lowest level. The result may come from the influence of coffee waste extract, which affects the color of the pettitoes(Jokbal). According to the sensory evaluation, the pork part with 10% of coffee waste extract showed the highest score in looking, chewiness, smell and preference, resulting in the improvement in quality of the pettitoes(Jokbal).

• Asia pacific journal of information systems
• /
• v.19 no.3
• /
• pp.99-124
• /
• 2009

Many firms in Korea have adopted and used advanced information technology in an effort to boost efficiency. The process of adapting to the new technology, at the same time, can vary from one firm to another. As such, this research focuses on several relevant factors, especially the roles of social interaction as a key variable that influences the technology adaptation process and the outcomes. Thus far, how a firm goes through the adaptation process to the new technology has not been yet fully explored. Previous studies on changes undergone by a firm or an organization due to information technology have been pursued from various theoretical points of views, evolved from technological and institutional views to an integrated social technology views. The technology adaptation process has been understood to be something that evolves over time and has been regarded as cycles between misalignments and alignments, gradually approaching the stable aligned state. The adaptation process of the new technology was defined as "appropriation" process according to Poole and DeSanctis (1994). They suggested that this process is not automatically determined by the technology design itself. Rather, people actively select how technology structures should be used; accordingly, adoption practices vary. But concepts of the appropriation process in these studies are not accurate while suggested propositions are not clear enough to apply in practice. Furthermore, these studies do not substantially suggest which factors are changed during the appropriation process and what should be done to bring about effective outcomes. Therefore, research objectives of this study lie in finding causes for the difference in ways in which advanced information technology has been used and adopted among organizations. The study also aims to explore how a firm's interaction with social as well as technological factors affects differently in resulting organizational changes. Detail objectives of this study are as follows. First, this paper primarily focuses on the appropriation process of advanced information technology in the long run, and we look into reasons for the diverse types of the usage. Second, this study is to categorize each phases in the appropriation process and make clear what changes occur and how they are evolved during each phase. Third, this study is to suggest the guidelines to determine which strategies are needed in an individual, group and organizational level. For this, a substantially grounded theory that can be applied to organizational practice has been developed from a longitudinal comparative case study. For these objectives, the technology appropriation process was explored based on Structuration Theory by Giddens (1984), Orlikoski and Robey (1991) and Adaptive Structuration Theory by Poole and DeSanctis (1994), which are examples of social technology views on organizational change by technology. Data have been obtained from interviews, observations of medical treatment task, and questionnaires administered to group members who use the technology. Data coding was executed in three steps following the grounded theory approach. First of all, concepts and categories were developed from interviews and observation data in open coding. Next, in axial coding, we related categories to subcategorize along the lines of their properties and dimensions through the paradigm model. Finally, the grounded theory about the appropriation process was developed through the conditional/consequential matrix in selective coding. In this study eight hypotheses about the adaptation process have been clearly articulated. Also, we found that the appropriation process involves through three phases, namely, "direct appropriation," "cooperate with related structures," and "interpret and make judgments." The higher phases of appropriation move, the more users represent various types of instrumental use and attitude. Moreover, the previous structures like "knowledge and experience," "belief that other members know and accept the use of technology," "horizontal communication," and "embodiment of opinion collection process" are evolved to higher degrees in their dimensions of property. Furthermore, users continuously create new spirits and structures, while removing some of the previous ones at the same time. Thus, from longitudinal view, faithful and unfaithful appropriation methods appear recursively, but gradually faithful appropriation takes over the other. In other words, the concept of spirits and structures has been changed in the adaptation process over time for the purpose of alignment between the task and other structures. These findings call for a revised or extended model of structural adaptation in IS (Information Systems) literature now that the vague adaptation process in previous studies has been clarified through the in-depth qualitative study, identifying each phrase with accuracy. In addition, based on these results some guidelines can be set up to help determine which strategies are needed in an individual, group, and organizational level for the purpose of effective technology appropriation. In practice, managers can focus on the changes of spirits and elevation of the structural dimension to achieve effective technology use.