• The Korean Journal of Nuclear Medicine Technology
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2008

Purpose: In general, We discharged radioactive wastewater and sewages less than $8.1{\times}10^{-13}$ Ci/ml in a exclusive water-purifier tank. Our hospital operating three exclusive water-purifier tank for radioactive wastewater and sewages of 60 tons capacity respectively. In order to meet the criteria it need a enough decay more than 125 days per each exclusive tank. However, recently we fell into the serious situation that decay period was decreased remarkably, owing to the wastewater amount increased rapidly by enlarge the therapy ward. For that reason, in this article, I'd like to say the way that reducing of radioactive wastewater and sewages rationally. Materials and Methods: From January, 2006 to October, four hundred and two cases were analyzed. They were all hospitalized during 3 days and 2 nights. We calculated the average amount of water used (include toilet water used, shower water used, washstand water used, $\cdots$), each exclusive water-purifier tank's decay period, as well as try to search the increased factors about water-purifier tank inflow flux by re-analysis of the procedure of radioisotope therapy step by step. Results: We could increase each exclusive water-purifier tank's decay period from 84 days to 130 days through the improvement about following cause: (1) Improvement of conventional toilet stool for excessive water waste $\rightarrow$ Replacement of water saving style toilet stool (2) Prevention of unnecessary shower and wash (3) Stop the diuretics taking during hospitalization (4) Analysis of relationship between water intakes and residual dose of body (5) Education about outside toilet utilization before the administration (6) Changed each water-purifier tank's maximum level from85% to 90% Conclusion: The originality of our efforts are not only software but hardware performance improvements. Incidentally the side of software's are change of therapy procedures and protocols, the side of hardware's are replacement of water saving style toilet stool and change of each water-purifier tank's maximum level. Thus even if a long lapse of time, problem such as return to the former conditions may not happen. Besides, We expect that our trials become a new reasonable model in similar situation.

• The Journal of Korean Society for School & Community Health Education
• /
• v.12 no.3
• /
• pp.65-87
• /
• 2011

Objectives: The purpose of this study was to perform basic study on environmental and respiratory diseases in Ulsan and vicinities. Also, this study evaluated the actual state of environmental disease and health education at middle and high schools in Ulsan and surroundings. Methods: For this study, we conducted a survey on the health of the general public, environmental effects, and investigated the characteristics of environmental disease, health and hygiene education, etc. The populations of this study were middle and high school students in Ulsan, Korea. This study investigated the knowledge of environmental disease and health education at schools in Ulsan and vicinities from November 2009 to December 2009. All statistical calculations were performed with Statistical Package for Social Sciences (SPSS) for Windows, and gained the following results by implementing Frequency Analysis, Cross-tabulation Analysis and ANOVA. Results: As more and more environmental diseases are increased, the interest of the people has been increasing on this. The incidence rates of asthma and atopy were represented the top 25% of the country in Korea. The source of heavy metal, PAHs and VOCs in Ulsan includes the Petrochemical Complex at Nam-gu and Ulju-gun, the Nonferrous Metal Industrial Complex at Onsan-eup, Ulju-gun, and the Heavy Industrial Complex at Dong-gu and Buk-gu. Especially, there are a number of fossil fuel combustion facilities such as waste incineration plants and boilers at Nam-gu and the Onsan Industrial Complex. It may help greatly to investigate the characteristics of environmental pollutants such as environmental air pollutant and indoor contaminant to better manage the local student's health. Conclusions: It has been revealed that the hazardous chemicals and environmental contaminants are main substances of cause for asthma, atopy, dermatitis, and allergy disease. Therefore, through with collecting basic data such as environmental disease of inhabitants, health education, conscious and knowledgeable level in parents of students and students, We have to exert to improve knowledge and prevention with health life in school through development of health education program systematically for preventing of environmental disease.

• Clean Technology
• /
• v.21 no.3
• /
• pp.141-152
• /
• 2015

As environmental issues are emerging, bio-plastic suppliers in leading countries have been foreseeing the strong needs for environment-friendly materials such as eco-packing materials due to increased attention and regulation on recycle. To catch up with the demand, various types of bio-plastics based on natural feedstocks were developed and released on a market. These bio-plastic products drew the great attention even in domestic industries. At present, international oil price fluctuation and heavy charge on waste raise the unit cost of production and disposal expense of conventional plastic materials. These conditions make bio-plastic an alternative, because it is not restrained by oil prices and problem in the disposal. It is also expected that bio-plastic will be applied to various types of products including containers, industrial supplies, disposables, and medical supplies. However, the bio-plastic is still in its infancy, thus more research and understanding should be followed to put it to application. Bio-plastic is considered as environment-friendly material with high potential which has the advantages of production and disposal.

• Journal of the Korean Society of Food Culture
• /
• v.18 no.3
• /
• pp.261-269
• /
• 2003

This was preliminary study that was to find out the developing point in military meal service to focus on seafood dishes that recently increased plate waste. This study was conducted to analyze menu patterns in military meal service. The result of this study was using to develop new seafood dishes in military meal service. On the basis of some findings, several developing points how to plan meals include many kinds of seafood dishes and to modify taste and cooking method that was more highly prefered by young military persons were suggested. This preliminary study findings were as follows: 1. Each meal was served cooked rice and 4 kinds of dishes(soup or stew, main dish, side dish and kimchi) 2. The seafood dishes was served as 28.6% in soup or stew, 35.0% in main dish and 36.4% in side dish of total serving of seafood dishes. 3. All of raw materials of seafood were supplied by frozen, several items were supplied dried material. Supplying seafood items were limited. Numbers of using seafood items were using 2.7 times per day. Laver and squid was most frequently used. 4. Seafood dishes were frequently serving in breakfast, especially seasoned & toasted laver was served 28.8% of seafood menu in breakfast because of convenience. 5. The nutrients contents of each dishes were as follows, the soup was $86.5{\pm}3.2kcal$ and $10.9{\pm}8.9g$ of animal protein, stew was $165.3{\pm}70.2kcal$ and $13.3{\pm}7.9g$ of animal protein. Nutrients content of other main dish and side dishes was different from 108.1kcal (in steaming dish) to 412.4kcal (in deep-fat frying dish) according to different cooking method. The highest animal protein dish that contented $18.9{\pm}5.1g$ of protein was pan-frying dish or grilling dish. Lowest one was $8.4{\pm}4.9g$ in braising dish. 6. Major cooking method of seafood was stew and the next was deep fat frying, stirfrying and braising. Pan-frying or grilling was seldomly used in military menu because of limitation of kitchen facilities and cooking utensils. On the basis of these findings, newely developing military seafood menus were focused on combination dish(such as seafood cooked rice or seafood fried rice) and many kinds of sauce that was applied to deep-fat frying dishes.

• Journal of Environmental Science International
• /
• v.23 no.6
• /
• pp.1095-1100
• /
• 2014

Keratin wastes are generated in excess of million tons per year worldwide and biodegradation of keratin by microorganisms possessing keratinase activity can be used as an alternative tool to prevent environmental pollution. For practical use of keratinase, its physicochemical properties should be investigated in detail. In this study, we investigated characteristics of keratinase produced by Xanthomonas sp. P5 which is isolated from rhizospheric soil of soybean. The level of keratinase produced by the strain P5 increased with time and reached its maximum (10.6 U/ml) at 3 days. The production of soluble protein had the same tendency as the production of keratinase. Optimal temperature and pH of keratinase were $40^{\circ}C-45^{\circ}C$ and pH 9, respectively. The enzyme showed broad temperature and pH stabilities. Thermostability profile showed that the enzyme retained 94.6%-100% of the original activity after 1 h treatment at $10^{\circ}C-40^{\circ}C$. After treatment for 1 h at pH 6-10, 89.2%-100% of the activity was remained. At pH 11, 71.6% of the original activity was retained after 1 h treatment. Although the strain P5 did not degrade human hair, it degraded duck feather and chicken feather. These results indicate that keratinase from Xanthomonas sp. P5 could be not only used to upgrade the nutritional value of feather hydrolysate but also useful in situ biodegradation of feather.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.141-146
• /
• 2017

New infectious diseases such as MERS have been in need of many measures such as initial discovery, isolation, and crisis response. In addition, the culture of hospitals is changing, such as the general public 's visiting and Nursing Care Integration Services. However, as the qualifications and regulations of medical personnel in hospitals become rigid, overseas such as linens, wastes movements are replacing possible works with robots. we have developed a hospital logistics robot that can carry out various goods delivery within a hospital, and can move various kinds of objects safely to a desired location. In this thesis, we have studied a hospital logistics robot that can carry out various kinds of goods delivery within the hospital, and can move various kinds of objects such as waste, and linen safely to a desired location. The movement of a robot in a hospital may cause a collision between a person and an object, so that the collision must be prevented. In order to prevent collision, it is necessary to recognize whether or not an object exists in the movement path of the robot. And if there is an object, it should recognize whether it moves or not. In order to recognize human beings and objects, we recognize the person with face/body recognition technology and generate the context awareness of the object using 3D Vision image segmentation technology. We use the generated information to create a map that considers objects and person in the robot moving range. Thus, the robot can be operated safely and efficiently.

• Korean Journal of Poultry Science
• /
• v.46 no.2
• /
• pp.87-94
• /
• 2019

Huge amount of persimmon peels, which are byproducts usually arising after making dried persimmons from fresh persimmons, are generated in fall, every year. As the dry matter of persimmon peel contains carbohydrates over 80%, it could be a good candidate for feed. In this study, we evaluated the persimmon peel as a feed resource for a hen laying eggs. Persimmon peel has lower ratio of crude protein and fat composition while higher ratio of crude fiber composition compared to a basal laying hen feed. Feeding the persimmon peel by adding to the feed at the level of 2% or 5% did not affect the egg-laying rate from beginning to the peak of laying. In addition, feeding the persimmon peel did not affect the egg quality either, as the pH, Haugh unit, yolk color and shell thickness of the egg were not different from each other. The composition of amino acids and fatty acids were also almost same for each other, except for the linolenic acid which was slightly higher in the persimmon peel feeding groups. In conclusion, addition of persimmon peel to the feed up to 5% might be helpful to increase the income and reduce the waste produced from the agricultural byproduct.

• Microbiology and Biotechnology Letters
• /
• v.50 no.1
• /
• pp.89-94
• /
• 2022

Triclosan (TCS) is an antimicrobial agent used in various human personal care products against both gram-positive and gram-negative bacteria. The purpose of this study was to evaluate the presence of TCS-resistant bacteria in sewage water in Peshawar, Khyber Pakhtunkhwa (KPK), Pakistan, for the first time. TCS-supplemented Luria Bertani (LB) agar was used to isolate TCS-tolerant bacteria. A total of 17 TCS-resistant isolates were randomly selected from a large pool of bacteria that showed growth on TCS-supplemented LB agar. Based on gram staining and physiochemical characteristics, the isolated strains were identified as Salmonella typhi (n = 6), Escherichia coli (n = 4), Citrobacter freundii (n = 4), Proteus mirabilis (n = 1), Enterobacter cloacae (n = 1), and Pseudomonas aeruginosa (n = 1). The Triclosan mean minimum inhibitory concentrations (MICs) for the isolates of Salmonella typhi, Escherichia coli, Citrobacter freundii, Proteus mirabilis, Enterobacter cloacae, and Pseudomonas aeruginosa were 23.66 ㎍ ml^-1, 18.75 ㎍ ml^-1, 42 ㎍ ml^-1, 32 ㎍ ml^-1, 64 ㎍ ml^-1, and 128 ㎍ ml^-1, respectively. The antibiogram revealed that all isolates were resistant to penicillin G (100%) and linezolid (100%), followed by ampicillin (94%), tetracycline (76%), tazobactam (76%), sulbactam/cefoperazone (64%), polymyxin PB (58%), amikacin (29.41%), aztreonam (29.41%), imipenem (5%), and gentamicin (5%). This is the first known study regarding the isolation of TCS-tolerant bacteria from sewage water in Peshawar, KPK, Pakistan. It was concluded that all the TCS-resistant isolates were multidrug resistant (MDR) gram-negative rod-shaped bacteria, mostly belonging to the Enterobacteriaceae family.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.19 no.2
• /
• pp.127-132
• /
• 2021

Purpose: It is known that the most common cause of gas poisoning in Korea is suicide attempts by burning ignition coals. Ignition coals are made from waste wood, and studies have been reported that heavy metals are emitted when this coal is burned. However, there was no study on how much heavy metal poisoning occurs in the human body through this, so this study was planned to find out whether the concentration of heavy metals in the blood increased in patients exposed to ignition coal combustion. Methods: From April 2020 to April 2021, blood lead, mercury, and cadmium concentrations were investigated in carbon monoxide poisoning patients who visited one regional emergency medical center in Seoul, and their association with exposure time, source of poisoning, and rhabdomyolysis were investigated. Results: During the study period, a total of 136 carbon monoxide poisoning patients were tested for heavy metals, and 81 cases of poisoning by ignition coal were reported. When comparing poisoning caused by combustion of ignition coal and other substances, there was no difference in the concentrations of lead, mercury, and cadmium in the blood, and there was no difference in the number of patients above the reference range. However, the patients exposed to more than 5 hours of ignition coal gas exposure are more frequent than those in the group less than 5 hours in lead (51.4% vs. 23.9%, p=0.012). Conclusion: Compared to poisoning with other combustible substances, the blood concentration of lead, mercury, and cadmium does not increase further in patients with gas poisoning by ignition coal. However, prolonged exposure may result in elevated levels of lead.

• Journal of Ginseng Research
• /
• v.47 no.3
• /
• pp.366-375
• /
• 2023

Background: Ginseng contains three active components: ginsenosides, gintonin, and polysaccharides. After the separation of 1 of the 3 ingredient fractions, other fractions are usually discarded as waste. In this study, we developed a simple and effective method, called the ginpolin protocol, to separate gintonin-enriched fraction (GEF), ginseng polysaccharide fraction (GPF), and crude ginseng saponin fraction (cGSF). Methods: Dried ginseng (1 kg) was extracted using 70% ethanol (EtOH). The extract was water fractionated to obtain a water-insoluble precipitate (GEF). The upper layer after GEF separation was precipitated with 80% EtOH for GPF preparation, and the remaining upper layer was vacuum dried to obtain cGSF. Results: The yields of GEF, GPF, and cGSF were 14.8, 54.2, and 185.3 g, respectively, from 333 g EtOH extract. We quantified the active ingredients of 3 fractions: L-arginine, galacturonic acid, ginsenosides, glucuronic acid, lysophosphatidic acid (LPA), phosphatidic acid (PA), and polyphenols. The order of the LPA, PA, and polyphenol content was GEF > cGSF > GPF. The order of L-arginine and galacturonic acid was GPF >> GEF = cGSF. Interestingly, GEF contained a high amount of ginsenoside Rb1, whereas cGSF contained more ginsenoside Rg1. GEF and cGSF, but not GPF, induced intracellular [Ca²⁺]_i transient with antiplatelet activity. The order of antioxidant activity was GPF > GEF = cGSF. Immunological activities (related to nitric oxide production, phagocytosis, and IL-6 and TNF-α release) were, in order, GPF > GEF = cGSF. The neuroprotective ability (against reactive oxygen species) order was GEF > cGSP > GPF. Conclusion: We developed a novel ginpolin protocol to isolate 3 fractions in batches and determined that each fraction has distinct biological effects.