• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1457-1464
• /
• 2013

We investigated the optimal conditions for keratinase production by feather-degrading Pseudomonas geniculata H10 using one variable at a time (OVT) method. The optimal medium composition and cultural condition for keratinase production were determined to be glucose 0.15% (w/v), beef extract 0.08% (w/v), $KH_2PO_4$ 0.12% (w/v), $K_2HPO_4$ 0.02% (w/v), NaCl 0.07% (w/v), $MgSO_4{\cdot}7H_2O$ 0.03%, $MgCl_2{\cdot}6H_2O$ 0.04% along with initial pH 10 at 200 rpm and $25^{\circ}C$, respectively. The production yield of keratinase was 31.6 U/ml in an optimal condition, showing 4.6-fold higher than that in basal medium. The strain H10 also showed plant growth promoting activities. This strain had ammonification activity and produced indoleacetic acid (IAA), siderophore and a variety of hydrolytic enzymes such as protease, lipase and chitinase. Therefore, this study showed that P. geniculata H10 could be not only used to upgrade the nutritional value of feather wastes but also useful in situ biodegradation of feather wastes. Moreover, it is also a potential candidate for the development of biofertilizing agent applicable to crop plant soil.

• Journal of the Korean Dietetic Association
• /
• v.7 no.1
• /
• pp.87-104
• /
• 2001

This study was conducted as a part of the project developing the standards of national board test for the dietitian's licence. The purpose of this study was to define the job description of dietitians, and to describe the task elements based on the detailed analysis of the dietitians' work. This study team established the research team which was composed of food and nutrition experts, 7 of registered dietitians and 3 of university professors. Draft job description form was made to fully explain the dietitians' task elements, process and sequence by the research team. Final job description form was confirmed after the validity of 576 task elements was reevaluated upon 4 point scale test based on the frequency, importance, and difficulty by 21 field registered dietitian by the study team. It was also confirmed by the university. This form was formated by following DACUM method which analyzed the job description containing duty, task and task elements. It was organized to include every dietitians' work and to describe the every detailed process of work. Duty was defined as the specific and independent work as a dietitian, and was composed of 17 parts, i.e 10 parts in food supply management area and 6 parts in nutritional care service area and self promotion area. Duties were also divided into 99 tasks containing the 576 detailed task elements to describe definite action, steps and decisions. Seventeen parts are following; menu planning, storage and inventory control, food production, meal service, waste management, sanitation, equipment and facility management, human resource management, financial management, nutrition assessment of life cycle, nutritional assessment of several disease, nutritional assessment in specific condition, medical nutrition therapy, nutritional education, public health nutrition and self promotion. If these protocols are properly performed and presented, they can provide the likelihood that dietetics professionals work as a primary contributors in promoting health care and preventing disease nationally.

• Environmental Analysis Health and Toxicology
• /
• v.28
• /
• pp.17.1-17.3
• /
• 2013

The fact that hazardous metals do not bio-degrade or bio-deteriorate translates to long-lasting environmental effects. In the context of evidently rapid global industrialization, this ought to warrant serious caution, particularly in developing countries. In the Republic of Fiji, a developing country in the South Pacific, several different environmental studies over the past 20 years have shown levels of lead, copper, zinc and iron in sediments of the Suva Harbor to be 6.2, 3.9, 3.3 and 2.1 times more than the accepted background reference levels, respectively. High levels of mercury have also been reported in lagoon shellfish. These data inevitably warrant thorough assessment of the waste practices of industries located upstream from the estuaries, but in addition, an exposure and health impact assessment has never been conducted. Relevant government departments are duty-bound, at least to the general public that reside in and consume seafood from the vicinities of the Suva Harbor, to investigate possible human effects of the elevated hazardous metal concentrations found consistently in 20 years of surface sediment analysis. Furthermore, pollution of the intermediate food web with hazardous metals should be investigated, regardless of whether human effects are eventually confirmed present or not.

• Journal of Plant Biotechnology
• /
• v.35 no.1
• /
• pp.31-39
• /
• 2008

We analyzed the current research trends of living modified organisms (LMO) by questionnaires in the interest of making biosaftey laws and policies in Korea. We executed a pre-survey at the Crop Functional Genomics 2004 conference and obtained LMO research information from 423 LMO research organizations, including 32 national research institutes, 314 universities, and 77 industries. We found that the total 59 kinds of hosts including 26 kinds of plants, 15 kinds of animals, and 18 kinds of microbes were used for LMO research and E. coli was the most common host. The risk of the most experimental hosts was below a biosafety level of 1 (73.8%) and 2 (25.9%). LMO development use purpose was implemented in various developmental uses: 51.3% in test and research use, 19% in health and medical use, and 12.9% in agriculture use. The experiment product, waste product, and products of host for LMO development were 327.2, 223.6, and 13.5 in number of plants; 280.6, 52.4, and 8.7 in number of animals; and $8.3\;{\times}\;10^{11}CFU$, $7.7\;{\times}\;10^{11}CFU$, and $6.5\;{\times}\;10^{11}CFU$ in microbes in 2004. The survey results about how to possess the LMO were very unreliable, because only 10.6% of the researchers returned the questionnaires. Consequently, we strongly suggest the scientific organizations as well as scientists should have more interests in biosafety of LMO research and an LMO biosafety management system should be developed for Korea's future biotechnology.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.19-26
• /
• 2014

Analysis of influential factors on water consumption in households will help predicting the water demand of end-use in household and give an explanation to cause on the change of trend. In this research, the data are gathered by radio telemetry system which is combined electronic flow-meter and wireless communication system in 140 household in Korea. Using this data, we estimate for each residential type to determine liter per capita day. we used real data to predict bathtub and washbowl water-uses and compared the ordinary least square regression model and autoregressive regression error model. The results of this study can be applied in the planning stages of water and waste water facilities.

• Journal of Korean society of Dental Hygiene
• /
• v.16 no.2
• /
• pp.313-319
• /
• 2016

Objectives: The objective of the study was to infection control by analyzing the influence of working environment on infection control activities in the dental hygienists. Methods: The cross-sectional study was based on a survey on a total of 377 dental hygienists working in dental settings. Multiple linear regression analysis was performed to examine the relationship of general characteristics and infection control activities. All statistical analyses were performed using the SPSS for Windows version 20.0, and p<0.05 was considered to be significant. Results: Predictive powers(=Adjusted $R^2$ of the investigated factors such as operation room, sterilization disinfection laundry, dental unit waterline, staff individual, infection control system, personal protective equipment, medical waste, hand hygiene, oral surgical procedures, clinical contact surfaces were adjusted $R^2=0.394$, 0.306, 0.277, 0.244, 0.241, 0.177, 0.165,, 0.154, 0.134, 0.124 respectively. Conclusions: In order to enhance infection control activities, the program development and implementation for the aseptic procedure is very important. The program should include periodic reinforcement of infection control education and regular monitoring of infection control activities.

• Journal of radiological science and technology
• /
• v.8 no.2
• /
• pp.29-45
• /
• 1985

Computed Tomography Scanner (CT) is highly expensive in operation as well as purchasing. That reason may cause not only to increase the burden of patients but also to waste the capital resources leading to financial difficulties. However the numbers of CT installed throughout the country is increasing, because of efficiency in medical care, patient's concern, competitions among the hospitals within the same area. In the non-Metropolitan area the scanners were expected to be less utilized and less profitable. Nine hospitals equipped with the CT were studied on the utilization of that equipment during the period from November 1984 to February 1985 in non-Metropolitan area and break-even point in one hospital was analyzed for estimating profitabilities. The results were as follows ; 1. Among those nine hospitals, four hospitals had less than 400 beds, which is one of the restrictive minimum standards on the installation of Whole-body Computed Tomography Scanner. 2. The operating time during the normal operation period was longer than those of any other studies, but the accumulated down time was also longer than those of any other studies. The average number of scanning per week for each CT was 45, while the estimated number of for the break-even point was 56.7 cases. 3. When the downtime was excluded in calculating the average operation would be much closer to the cases for the break-even point. Therefore the break-down of the equipment was to be a main cause of the low profitability. 4. The average scanning rate for head area was 33.6%, however three of the nine hospitals showed about 20%. 5. If scanning ratio for the body parts excepting head was increased, the number of scanning for the break-even point would be diminished. 6. The small size hospital especially located near the Metropolitan area showed largest loss in the CT operation. In purchasing the highly expensive equipments in hospitals, demand should be taken into account and planning is recommended.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.2
• /
• pp.63-72
• /
• 2017

Purpose: The purpose of this study is to review the material handling system of the Airborne Infection Isolation Hospitals which is the one of the key elements of infection control and to improve the basic data for the planning and design of those facilities. Methods: Research was conducted by literature reviews and case studies for the material handling system of domestic and foreign Isolation hospitals. Results: The result of this study can be summarized into three points. First, a general isolation unit and a high level isolated unit need to be distinguished in terms of efficiency and safety. In particular, it is desirable that a high level isolated unit have to completely separate clean and soiled circulations, and soiled corridor should be installed by those means. By doing this, the medical staff can observe patient rooms and supply clean materials directly in the clean zone without wearing PPE, so that safety and work efficiency can be improved at the same time. Second, for the safe disposal of wastes, it is desirable to install a dedicated sterilizer per ward and sterilize it at least in the ward. In addition, It is desirable to install a central waste treatment room and a dedicated soiled corridor in consideration of the inadequate handling capacity and emergency situation. Third, the characteristics of material flow chart in the negative pressured isolation hospitals and the corresponding material handling system have been presented. Implications: Infection control is very important in safety, but it is necessary to respond to the symptoms of the patient.

• Journal of environmental and Sanitary engineering
• /
• v.24 no.2
• /
• pp.17-30
• /
• 2009

In Iksan city, there have been a lot of complaints caused by offensive odor from residents living near the public environmental infrastructures and the Iksan industrial complex. To solve these problems, it is important to know the present condition of odor pollution level in these areas, the emission characteristics of malodorous gases in temporal and spatial variations in addition to meteorological components, and the facilities of major sources emitting malodorous compounds. The objectives of this study is to make the odor monitoring network for 20 people who lived and worked in areas where the environmental infrastructures and the Iksan industrial complex are located and their neighboring areas for six months from June 1st to October 31st in 2008 in Iksan and to monitor the temporal and regional frequency and characteristics of odor intensity using direct olfactory methods. As a result of odor monitoring, the highest frequency of sensed odor per month and 20 people for six months was found to be 107 in July, followed by 84 in September, 80 in August, 54 in June, 38 in October, respectively. Odor intensity trend showed a regional trend in the decreasing order of Dongsan-dong, Busong-dong, and Palbong-dong. Odor was widely perceived from night through next morning and considered as the sense of excreta, chemicals, sewage, compost, waste, etc. When high odor intensity was sensed, there were constant meteorological characteristics: relative humidity was 80~90%, wind speed was less than 0.5~1 m/sec, and main wind directions were from the east, the southeast, and the south.

• Journal of Environmental Science International
• /
• v.21 no.3
• /
• pp.369-375
• /
• 2012

We investigated usefulness of chicken feather as bioadsorbent for removal of hexavalent chromium[Cr(VI)] and oil from aqueous solution. Chicken feather was chemically treated with DTPA, EDTA, NaOH and SDS, respectively. Among them, EDTA was the most effective in adsorbing Cr(VI). Cr(VI) uptake by chicken feather was increased with decreasing pH; the highest Cr(VI) uptake was observed at pH 2.0. By increasing Cr(VI) concentration, Cr(VI) uptake was increased, and maximum Cr(VI) uptake was 0.34 mmol/g. Cr(VI) adsorption by chicken feather was well described by Freundlich isotherm than Langmuir isotherm and Freundlich constant(1/n) was 0.476. As the concentration of chicken feather was increased, Cr (VI) removal efficiency was increased but Cr(VI) uptake was decreased. Most of Cr(VI) was adsorbed at early reaction stage(1 h) and adsorption equilibrium was established at 5 h. On the other hand, chicken feather adsorbed effectively oils including bunker-A and bunker-C. In conclusion, our results suggest that chicken feather waste could be used to remove heavy metal and oil; it is a potential candidate for biosorption material.