• Management & Information Systems Review
• /
• v.36 no.1
• /
• pp.181-213
• /
• 2017

According to the aging, the medical device industry is focused as a future promising industry. However, Korea medical device industry is not enough market competitiveness due to a narrow domestic market and a small company structure. This study aims at evaluating medical device priorities following 3 steps. First, we classify the medical device into three hierarchy categories and AHP survey was conducted on 30 experts in order to extract medical device priorities. Second, priority scores of medical device are analysed using AHP and Fuzzy-AHP. Third, a most important medical device is selected by comparing the volume of medical device manufacture and priority scores. As a result, 'dental implant' is the most import medical device, and we suggest a strategy based on a positioning map. The proposed methodology will provide a inspiration for establish of R&D and support policy in the medical device industry.

• The Korean Journal of Health Service Management
• /
• v.7 no.3
• /
• pp.203-212
• /
• 2013

Medical devices separated by a committee of the International Electrotechnical Commission IEC TC (Technical Committee) 62 medical electrical equipment being promoted by the International standards. Actually, a lot of standards were existed, but many national and international standards for medical devices were lacking in practical standards that can be applied to their development. Most international standards were focused in electrical and mechanical safety of medical devices. Therefore, there were few practical standards which contain essential performance evaluation. Although medical device regulations do not enforce a fixed lifecycle model, activities are presented in a sequential manner, thus hinting at a waterfall process. Meanwhile, for a decade or more, software teams have benefitted from agile development methods. Several medical device manufacturers have adopted agile practices while keeping development in compliance with regulations, but conflicts arise and decisions have to be taken in favor of agility or formality. However, if there are new practical standards of medical devices, it must be possible to promote the medical devices industry in their nation. To do this, there is a need to develop a new standard could apply to the international market through the analysis of the medical device related technology. Consequently, new standards such as NP (New proposal) or NWIP (New Work Item Proposal) should be developed through international standardization of medical device technology.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.27 no.1
• /
• pp.23-28
• /
• 2023

Carbon materials are widely used in many areas of our lives. A fiber having a carbon content of 90% or more obtained by heating an organic fiber precursor is referred to as a "carbon fiber". Carbon fibers are currently used in the medical market to manufacture radiation transmission device parts, artificial joints, and medical aids, as many developments have been made to utilize carbon fibers' characteristics such as light weight, radiation permeability, biocompatibility, high strength, high heat resistance, thermal conductivity, and electrical conductivity. In order to maintain body temperature and increase immunity in long-lasting nuclear medical examination and treatment through the idea of convergence of carbon materials and radiation technology, the quality of medical services can be improved by utilizing carbon materials. We should be aware of the domestic carbon-based medical device industry and make efforts to contribute to the development of medical devices. As a radiation expert, we should try to use our skills and experience to find items that can be fused with medical devices to develop various nuclear medical examination fields and radiographic examination fields that can be widely applied. We should actively engage in future technology development and carbon material research to strengthen the global competitiveness of the domestic medical device industry and improve the quality of medical services.

• Journal of Internet Computing and Services
• /
• v.11 no.5
• /
• pp.59-70
• /
• 2010

The Ubiquitous Healthcare business are growing recently by medical service development. According to this environment, many healthcare service model have been studying and suggested. At the same time, medical world market has been reorganized into a traditional medical science out of the west medical science. But in spite of this trend, domestic U-Healthcare market in traditional medical science is for lack of profit service model. So it is true that the presentation is demanded from oriental medicine U-Healthcare service model these days in oriental field. Thus, in this paper we propose the healthcare service model that can be applied to the oriental field efficiently. Our method is based on fuzzy rule method that analyze the patient data by CDSS processing. In experiment, proposed method is more profitable and efficient than west service model. For future works, we will research about the standardization and security of processed data.

• Journal of Ginseng Research
• /
• v.15 no.3
• /
• pp.205-215
• /
• 1991

The current size, characteristics. and channels of distribution of the offshore export (non North American) market for ginseng products are described. The apparent size of the worlds export market for ginseng products in 1987 is 3,363 tonnes. The major export markets for ginseng are Hong Kong (1,972.4 tonnes) and Japan (540.9 tonnes). The volume of ginseng imported into Hong Kong has doubled over the past five years from 976.3 tonnes in 1983 to 1,972.4 tonnes in 1987. This increase is reflective of an expanding Chinese market. In terms of products forms, the toast majority of ginseng imported into China is in root form, while Japan imports both red and white ginseng as well as ginseng beverages and medical products. Hong Kong is the destination of over 86f; of the volume of North American ginseng exported between 1983 and 1987. North American ginseng products are distributed by ginseng brokers or importers/exporters.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.3 s.39
• /
• pp.303-311
• /
• 1992

It is very important to estimate the future medical care expenditure, because medical care expenditure escalation is a big problem not only in the health industry but also in the Korean economy today. This study was designed to project the medical care expenditure in view of population age change. The data of this study were the population projection data based on National Census Data(1990) of the National Statistical Office and the Statistical Reports of the Korea Medical Insurance Corporation. The future medical care expenditure was eatimated by the regression model and the optional simulation model. The significant results are as follows : 1. The future medical care expenditure will be 3,963 billion Won in the year 2000, 4,483 billion Won in 2010, and 4,826 billion Won in 2020, based on the 1990 market price considering only the population age change. 2. The proportion of the total medical care expenditure in the elderly over 65 will be 10.4% in 2000, 13.5% in 2010, and 16.9% in 2020. 3. The future medical care expenditure will be 4,306 billion Won in the year 2000, 5,101 billion Won in 2010, and 5,699 billion Won in 2020 based on the 1990 market price considering the age structure change and the change of the case-cost estimated by the regression model. 4. When we consider the age-structure change and inflation compared with the preceding year, the future medical care expenditurein 2020 will be 21 trillion Won based on a 5% inflation rate, 42 trillion Won based on a 7.5% inflation rate, and 84 trillion Won based on a 10% inflation rate. Consideration of the aged(65 years old and over) will be essential to understand the acute increase of medical care expenditure due to changes in age structure of the population. Therefore, alternative policies and programs for the caring of the aged should be further studied.

• Journal of Sport and Applied Science
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2017

Most of people do not remind of 'Who is domestic medical device business?' A lot of people that Johnson and Johnson, GE and Philips and other foreign companies belong to medical device company. In fact, local enterprises small place based on world market. Local medical device industry's production has grown up rapidly last 10 years. Sales increased nearly 3 times from trillion and 500 billion KRW in 2004 to 4 trillion and 600 billion KRW in 2014. The production record constantly increased owing to safety and good quality of domestic medical devices. As many as 59% of medical devices made in Korea is exported to 198 countries in the world. Currently, medical device industry in the world has been given considerable attention. Cognition and awareness are very much low. Medical device industry, high income creating industry, is said to next generation industry to increase scale, and Korea does not follow world flow. The industry is given support from the government that is not enough. Korean enterprises have small scale among a lot of global enterprises. Being interested in development of medical devices, the author selected department of IT at college.

• The Journal of the Korean dental association
• /
• v.56 no.9
• /
• pp.479-490
• /
• 2018

3D printing technology supporting the specific patient medical services is actively being implemented in dentistry. The purpose of this study is to introduce the legal and institutional considerations to the medical practitioners in dentistry who must observe when they manufacture medical devices using 3D printers, and to provide a ways to activate and enhance their utilization in the domestic approval point of view for medical devices. Through the public data of government agencies and related organizations, the statutory system and compliance matters related to the manufacture of 3D printing medical devices have been examined and reviewed for the government's improvement efforts. Through the study, the government has been actively improving the system and making policy, but the active interest and participation of medical professionals and related workers are continually required to solve the problems which are scattered. 3D printing technology is expected to be more frequently utilized in the field of dentistry in near future. Therefore, it is essential to establish measures to improve the regulation through continuous cooperation with the related ministries with the long-term point of view enhancing smooth entry to the market for the medical devices by taking data from the continued research.

• The Journal of Internal Korean Medicine
• /
• v.29 no.2
• /
• pp.311-317
• /
• 2008

Objective : To build a basis of patent analysis for development of Korean ginseng as a competitive medical product in the world market. Methods : Survey of all patents related to ginseng or ginseng products in Korea and other rival countries such as the USA, Japan or EU, using KIPRIS. Results : Korea has more patents of ginseng itself , however has fewer patents related to functional goods, higher value-added businesses or medical technologies using ginseng than rival countries. Conclusion : The Oriental medical world should make more effort to verify the pharmacological effects of ginseng, develop high value-added functional products or medical technologies using ginseng and apply for more patents in such fields.

• Journal of Powder Materials
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2014

Medical technologies are gaining in importance because of scientific and technical progress in medicine and the increasing average lifetime of people. This has opened up a huge market for medical devices, where complex-shaped metallic parts made from biocompatible materials are in great demand. Today many of these components are already being manufactured by powder metallurgy technologies. This includes mass production of standard products and also customized components. In this paper some aspects related to metal injection molding of Ti and its alloys as well as modifications of microstructure and surface finish were discussed. The process chain of additive manufacturing (AM) was described and the current state of the art of AM processes like Selective Laser Melting and electron beam melting for medical applications was presented.