보건의료산업학회지 (The Korean Journal of Health Service Management)

  • 제7권3호
  • /
  • Pages.203-212
  • /
  • 2013
  • /
  • 2093-5986(pISSN)
  • /
  • 2288-0666(eISSN)
보건의료산업학회 (Korea Society of Health Service Management)
권호 표지
DOI QR코드

DOI QR Code

의료용 전기기기에 대한 국제표준 현황

International Standards of Electrical Equipments for Medical Practice

  • 투고 : 2013.04.29
  • 심사 : 2013.09.10
  • 발행 : 2013.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Medical devices separated by a committee of the International Electrotechnical Commission IEC TC (Technical Committee) 62 medical electrical equipment being promoted by the International standards. Actually, a lot of standards were existed, but many national and international standards for medical devices were lacking in practical standards that can be applied to their development. Most international standards were focused in electrical and mechanical safety of medical devices. Therefore, there were few practical standards which contain essential performance evaluation. Although medical device regulations do not enforce a fixed lifecycle model, activities are presented in a sequential manner, thus hinting at a waterfall process. Meanwhile, for a decade or more, software teams have benefitted from agile development methods. Several medical device manufacturers have adopted agile practices while keeping development in compliance with regulations, but conflicts arise and decisions have to be taken in favor of agility or formality. However, if there are new practical standards of medical devices, it must be possible to promote the medical devices industry in their nation. To do this, there is a need to develop a new standard could apply to the international market through the analysis of the medical device related technology. Consequently, new standards such as NP (New proposal) or NWIP (New Work Item Proposal) should be developed through international standardization of medical device technology.

키워드

참고문헌

  1. S.C. Kim(2010), Medical Device Defects and Product Liability, Korea Law Association, Law Research, Vol.39;39-59.
  2. I.W. Han(2004), Competitiveness Korea for the Medical Device Industry Design Study on the Development of the Korea Society, Design Science, Vol.58;51-60.
  3. T.I. Kim, J.H. Lee(2013), Gangwon Province Medical Device Industry, the Business Model of the FTA Research, Korea Institute of tariffs, duties Journal, Vol.14(1);89-110.
  4. D.C. Lee, C.S. Lee, J.R. Jo(2012), Medical Device Software Validation, Case Studies, and the Korea Accounting Association, the International Accounting Research, Vol.46;281-302.
  5. S.S. Choi, J.S. Lee, I.H. Hwang, J.H. Cha, C.H. Huh, G.J. Park(2010), High-Frequency Electromagnetic Interference with Medical Equipment Applications. Resistance Guidelines Development, Rehabilitation Welfare Society of Korea, Journal of Rehabilitation Welfare Society, Vol.4(1);35-41.
  6. S.H. Park, H.J. Hwang(2012), Resources and Communication Efficiency-Based Remote Monitoring System for Medical Device Design, Digital Hospital, Korea Institute of Information Technology, Korea Institute of Information Technology, Vol.10(12);127-133.
  7. G.J. Lee(2000), Venture Capital Support Medical Device Validation and Improvement of the System, Korea Institute for Health and Social Affairs, Health and Welfare Forum Vol.45;55-68.
  8. Y.H. Oh, O.S. Kwon(2011), Manual Defibrillation Improved User Interface of a Medical Device Case Studies, Korea Digital Design Conference, Digital Design Studies, Vol.11(4);401-410.
  9. S.G. Park, J.H. Cha, C.H. Huh, G.J. Park, I.H. Moon(2010), U-health Care Environment, Safety and Performance of Medical Devices using Standard Test Methods for the Evaluation of Research, Rehabilitation Welfare Society of Korea, Journal of Rehabilitation Welfare Society, Vol.4(1);9-14.
  10. D.J. Oh, C.W. Kim, Y.G. Yang, T,Y. Kim, J.J. Kim(2010), Recipient Shape Memory Alloys for Angioplasty(SMA) Wire Actuator Controls the Temperature of the Heat Treatment Conditions, Changes in the Parameters(t1) Impact, the Korean Society of Mechanical Engineers, Mechanical Engineers, Vol.34(5);619-628. https://doi.org/10.3795/KSME-A.2010.34.5.619
  11. S.G. Park, I.H. Moon(2009), Reference Standard of Medical Research Beds and Operating Tables, Korea Welfare Society of Rehabilitation, Rehabilitation Institute of Welfare Society, Vol.3(1);35-40.
  12. S. Kim, M.Y. Jang, Y.S. Hwang, G.H. Lee, C.H. Huh, C.M. Hong(2013), Personal Electrical Stimulator Performance and Safety Assessment Studies, Institute of Electronics Engineers, Institute of Electrical Engineering, Vol.50(3);187-202.
  13. http://www.iso.org/iso/home/standards_devel opment/list_of_iso_technical_committees.htm.2012
  14. http://www.iec.ch/dyn/www/f?p=103:6:0##ref= menu, 2012.
  15. http://www.iec.ch/dyn/www/f?p=103:22:0::::FS P_ORG_ID,FSP_LANG_ID:1245,25.2012.
  16. Korea Agency for Technology and Standards(2010), Long-term Roadmap for Next-Generation Medical Devices Digital Convergence, pp.24-29.
  17. http://www.kssn.net/StdKS/KS_list.asp?key1=P &key2=P12.2012.
  18. G.W. Lee, S.B. Kim, Y.B. Kim, D.Y. Kim(2011), Medical Factors Affecting Purchase Intention, The Korean Journal of Health Service Management, Vol.5(1);125-132. https://doi.org/10.12811/kshsm.2011.5.1.125
  19. J.D. Yu, J.S. Park(2009), Spinal Bone Mineral Density Measurements using Quantitative Computed Tomography, The Korean Journal of Health Service Management, Vol.3(2);87-94.