• Journal of the Korean Society of Radiology
• /
• v.16 no.7
• /
• pp.815-824
• /
• 2022

The current radiation safety management system is also applied to radiation practices at universities. The application of the law raised concerns about poor radiation practice education and hindering the development of radiology. Accordingly, the Korean Radiology Professors Association needed to grasp the reality of the management system for radiation practice education at each university and the current radiation safety management system in the department of Radiological science. So, a survey was conducted on heads of radiological science departments across the country. Through the survey, it was found that the current application of the Nuclear Safety Act to radiation safety management in the department of Radiological science is excessively restrictive and not very effective. In addition, radiology practice education for the purpose of training health and medical professionals should be controlled by the Ministry of Health and Welfare and the Korea Centers for Disease Control, but there is a problem of being supervised by the Nuclear Safety and Security Commission. Therefore, in this study, as a legal improvement plan to solve this problem, first, a plan according to a partial amendment to the Higher Education Act, second, a plan to be supervised by the Ministry of Health and Welfare through the amendment of article 37 of the Medical Service Act, third, article 20-2 of the Enforcement Decree of the Medical Service Technologists Act was newly inserted to propose three measures to be supervised by the Ministry of Health and Welfare.

• Journal of Biomedical Engineering Research
• /
• v.27 no.4
• /
• pp.154-163
• /
• 2006

A 64-channel magnetocardiogram (MCG) system using low-noise superconducting quantum interference device (SQUID) planar gradiometers was developed for the measurements of cardiac magnetic fields generated by the heart electric activity. Owing to high flux-to-voltage transfers of double relaxation oscillation SQUID (DROS) sensors, the flux-locked loop electronics for SQUID operation could be made simpler than that of conventional DC SQUIDs, and the SQUID control was done automatically through a fiber-optic cable. The pickup coils are first-order planar gradiometers with a baseline of 4 em. The insert has 64 planar gradiometers as the sensing channels and were arranged to measure MCG field components tangential to the chest surface. When the 64-channel insert was in operation everyday, the average boil-off rate of the dewar was 3.6 Lid. The noise spectrum of the SQUID planar gradiometer system was about 5 fT$_{rms}$/$\checkmark$Hz at 100 Hz, operated inside a moderately shielded room. The MCG measurements were done at a sampling rate of 500 Hz or 1 kHz, and realtime display of MCG traces and heart rate were displayed. After the acquisition, magnetic field mapping and current mapping could be done. From the magnetic and current information, parameters for the diagnosis of myocardial ischemia were evaluated to be compared with other diagnostic methods.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.413-418
• /
• 2019

Studies are now actively underway to confirm the degree of treatment and rehabilitation of patients with brain-related diseases (dementia, schizophrenia, depression, Parkinson's disease). Among them, Transcranial magnetic stimulation (TMS) is widely used in treatment because it is a technique that is used for noninvasive brain neuron control in patients with brain disorders. It can be seen that muscle fatigue of normal people increases during Transcranial magnetic stimulation. Therefore, in this paper, our purpose is to build an EMG measurement system to measure motor neuron-induced response during transcranial magnetic stimulation and We identify a motor-neutral response system using tendency in the RMS graph. As an experimental method, the Raw Data received through the surface EMG device and analyzed by RMS technique, after the contraction and relaxation movement of the biceps brachii. As a result of the experiment, we confirmed the trend of rising RMS graph, and it will can be used to determine the self-stimulation intensity for each individual in consideration of the data of the motor-neutral response.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.805-813
• /
• 2018

The research was conducted with the purpose of providing effective safety and quality control system for assistive products for handicapped those are used extensively. Assistive products couldn't be classified independently due to collision with the act of medical device and lack in legal basis. The issues about safety and quality have been solved by other legal frames on a case by case basis. We couldn't find any abroad case of independent safety and quality control policy. For the practical solution, this article suggested hybrid classification system mixed with existing policies. Each classified branches are allocated to the appropriate policy of safety and quality control so those are ease of understanding and prospect. And also a delicacy process was suggested not to leave off any assistive products. Through these suggests of the improvement it is expected that blind areas of safety and quality control for assistive products for handicapped could be solved and identity of assistive products could be established to provide product safety for handicapped and boost relevant industries.

• Journal of Digital Contents Society
• /
• v.17 no.4
• /
• pp.287-293
• /
• 2016

Some studies require sufficient amount of time, spaces, and financial condition for practical exercises and training. In particular for the Medical education, time and space limitation is very high and difficulties occurs, since the practices are done with cadavers (deceased human body). Many alternate 3D Virtual surgery training system exist currently, however the burdensome of obtaining those costly equipments is problematic. Providing the surgical environment as similar to real as possible using 3D Virtual Reality can be a solution to current problems. The effectiveness of training could be maximized with minimized costs without the general interfaces such as keyboard and mouse, but with Oculus Rift and Leap Motion. This paper will develop and practice the 3D Virtual Operation System with two devices to investigate the possibility and expand to other Simulation fields.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.6
• /
• pp.271-280
• /
• 2017

In this paper, we propose a new safety system composed of wearable devices, driver's seat belt, and integrating controllers. The wearable device and driver's seat belt capture driver's biological information, while the integrating controller analyzes captured signal to alarm the driver or directly control the car appropriately according to the status of the driver. Previous studies regarding driver's safety from driver's seat, steering wheel, or facial camera to capture driver's physiological signal and facial information had difficulties in gathering accurate and continuous signals because the sensors required the upright posture of the driver. Utilizing wearable sensors, however, our proposed system can obtain continuous and highly accurate signals compared to the previous researches. Our advanced wearable apparatus features a sensor that measures the heart rate, skin conductivity, and skin temperature and applies filters to eliminate the noise generated by the automobile. Moreover, the acceleration sensor and the gyro sensor in our wearable device enable the reduction of the measurement errors. Based on the collected bio-signals, the criteria for identifying the driver's condition were presented. The accredited certification body has verified that the devices has the accuracy of the level of medical care. The laboratory test and the real automobile test demonstrate that our proposed system is good for the measurement of the driver's condition.

• Journal of Acupuncture Research
• /
• v.28 no.6
• /
• pp.1-17
• /
• 2011

Objectives : This study aimed to review randomized controlled trials of acupuncture performed in South Korea that used sham acupuncture as a control group. Methods : The following databases were searched through the end of September 2011: Koreanstudies information service system (KISS), Korean medical database (KMbase), national discovery OR science leaders (NDSL), oriental medicine advance searching integrated system (OASIS), and research information service system (RISS). The following search terms were used: acupuncture AND (sham or placebo). The reference lists of searched articles and Korea institute of oriental medicine (KIOM) reports(2005~2009) were identified. The following data were extracted: year/first author, disease, number of participants, blinding, intervention, outcome, and result. Where appropriate, we performed meta-analysis. The methodological quality was assessed according to the Jadad scale and 'risk of bias' by Cochrane Handbook procedure. Results : Twenty-nine studies were included in this review. In eighteen studies, penetrating sham controls were used as the control intervention, whereas the remaining eleven studies adopted non-penetrating sham controls such as the Park Sham Device or blunt auricular acupuncture. Nine studies showed statistically significant difference in outcomes. Twelve studies concerning insomnia after stroke, chronic tension-type headache, idiopathic Parkinson's disease, Hwa-Byung, and smoking cessation were included in meta-analysis. A meta-analysis of insomnia after stroke only found significant difference(MD -4.31, 95% Cl -6.19 to -2.42, $p$<0.00001). In general, all of the studies showed low methodological quality(Jadad score: mean 2.1). Risk of bias by Cochrane Handbook procedure varied. Conclusions : The results of this study could not suggest conclusive evidence that acupuncture is more effective than sham acupuncture in several diseases. In the future, more studies with rigorous acupuncture trials using sham controls should be conducted.

• Journal of Korean Ophthalmic Optics Society
• /
• v.8 no.1
• /
• pp.35-39
• /
• 2003

The display technology on the retina is the key role in inspecting the condition of the patients. 2-dimensional retina image is widely used in the eye examination as of today. Recently, 3-dimensional retina image ones have been introduced to this area, but the quality of the image is not fully satisfied to the operator. For the purpose of developing 3-D retina imaging instrument, the optimization of a 3-D retina imaging system using Code-V tool was investigated in this thesis. He-Ne laser having the wavelength 632.8 nm was used to make a power source to detect the retina. Several lenses and mirrors installed on sledge which were developed to perform focus control on 3-D device were designed to make a beam focusing and direct line. Polygon scanner having 24 mirror facets and galvanometer making tilting movement were utilized to make a 2-D laser plane. Also, design of eye ball had been fulfilled to see the focus of the 2-D plane. Reflected ray from retina detected on the sensor array with the same path. All cognitive components were optimized for aberration correction in order to focus on retina. Results of optimization were compared to those of initial designed optics system. On the basis of above results, the result of third aberration has been corrected to stable values to the optical system. MTF evaluating the resolution of an image has been closely correlated to the diffraction limit and PSF indicating the strength distribution of an image has shown the SR value as 0.9998 having high performance. The possibility of new and powerful 3-D retina image instrument was verified by simulating each component of the instrument by Code-V.

• Journal of radiological science and technology
• /
• v.18 no.2
• /
• pp.87-102
• /
• 1995

The education of radiologic technology began in the regular institute of higher education in Korea in 1963. Up to now from then, our education to bring up the radiologic technologists has developed greatly in quality and quantity, and now departments of radio-technology are founded in the 16 junior colleges in March, 1995. This study was done to verify the necessity and propriety to reform the education system of radiologic technology which was run as two or three year system of college curriculum for 32 years since 1963, and to search for the method to reform in the future. We got the following results from this research. 1. In the survey, on the desirable education year for radiologic technologists, 63.9 % of professors of department of radio-technology and 63.0 % of radiologic technologists chose the 4 year system, 27.9 % of professors and 34.6 % of radiologic technologists chose the 4 year system added to graduate school. 2. In the survey, on the future development of radiologic equipments and technique, 67.2 % of professors of department of radiologic technology and 86.4 % of radiologic technologists have a view of "revolutional development". Also, on the future tasks or roles of radiologic technologists 95.1% of professors and 94.9% of radiologic technologists have a view that "They will increase". 3. On the necessity of extension of education year to 4 years from 3 years, the factor is that development of medical technique and machinery and tools, advance of qualification of radiologic technologists, enlargement and specialization of the business of the radiologic technologists, ballance of education year with other medical sciences, international competitive power and cooperation of radiologic technology, and education continuation of the graduates of department of radiologic technology. 4. They suggested that in the 4 year curriculum of department of radiologic technology, clinical medicine, quality control of radiation and radiologic equipment, related subjects to the radiologic application and computer application should be enforced and clinical practice should be extended more. 5. On the device to found the 4 year college curriculum of radiologic technology, they suggested that first, 4 year curriculum should be founded through the variety of educational year, secondly, department of radiologic technology should be founded in the 4 year health sciences college, thirdly, educational continuation of the radiologic technologists should be systematized on the basis of life-long education.

• Clean Technology
• /
• v.18 no.4
• /
• pp.331-340
• /
• 2012

Synthetic methods of colloids have been significantly developed in industry due to their significant demand for preparation of functional particles. Recently, dynamic/static microfluidic system has emerged as a promising route to the synthesis of the particles, providing precise control of physical and chemical properties such as size, shape, porosity, surface roughness, and surface functionality. These formed particles can be potentially used in various applications including medical diagnostics, photonic device, and biological industry. In addition, these particles provide a novel route to create new materials via their directed self-assembly, and it enable to study and predict the natural phenomenon by mimicking of the nature. Therefore, we describe recent progress for functional colloid particles and its applications.