• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.315-324
• /
• 2016

The relevant ministries, including the Ministry of Environment in Korea, provided Post-2020 Long-term Mitigation Target and Implementation Plan. The plan consisted of four Business As Usual (BAU) reduction levels by 14.7%, 19.2%, 25.7%, and 31.3% until 2030. The Korean government finalized the mitigation target of 37%. But all the initial alternatives were below the goal, 30% from BAU, that has been promised to the international community as well as set out in the Framework Act on Low Carbon Green Growth. In order to achieve a specific goal, performance management should pursue "Justify doing the right things." Otherwise, performance management would not work properly. According to Kingdon's Policy Stream Framework, abnormal alternatives are difficult to be presented as scenarios because alternative building should focus on the role of the need to adhere to the basic principles and professionals. Such a result is possible only when the policy actors does not balance themselves. Performance management statistics has been analyzed by 6 years CCPI data since 2011, taking into account the impact after enactment. This study also has been complemented by a variety of sources, including the media, documents, and artifacts during the period. As a result, raising awareness about climate change was analyzed as one of the solutions because the climate change issue affects the normal performance management throughout the life of the people to stay linked to the environment.

• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.1013-1023
• /
• 2003

This study was performed to improve water quality of stream by applying hydraulic structures (weir and river bed material) made of porous concrete. The physical and chemical characteristics of porous concrete were measured to estimate application possibility of it in hydraulic structures and it was considered as a proper material for the hydraulic structures. In the results of comparison for the component of matters attached on the hydraulic structures made of porous and ordinary concrete, DW (dry weight) amount attached on porous concrete was 1.6 times higher than that on ordinary concrete under the condition of the same flow rate but influence by flow rate (difference of 10 times) was not shown. Therefore, we could understand that the material of media was more important in DW amount than flow rate. The rate of AFDM (ash free dry mass) to DW also was more at porous concrete than at ordinary concrete. Especially, the high rates of nitrogen and phosphorous in matters attached on porous concrete verify that they were removed by assimilation, adsorption and metabolism of periphyton. The removal percentage of SS, BOD, COD, T-N and T-P by hydraulic structures applying porous concrete compared with ordinary concrete was increased by 34.6%, 36.9%, 33.9%, 18.3% and 21.6%, respectively. Therefore, applying porous concrete to hydraulic structure is expected to contribute to improvement of stream water quality.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.1C
• /
• pp.21-35
• /
• 2002

Nowadays, in accordance with increasing expectations of multimedia stream service on the internet, a lot of distributed applications are being required and developed. But the models of the existing systems have the problems that cannot support the extensibility and the reusability, when the QoS relating functions are being developed as an integrated modules which are suited on the centralized controlled specific-purpose application services. To cope with these problems, it is suggested in this paper to a distributed QoS management system on CORBA, an object-oriented middleware compliance. This systems we suggested can provides not only for efficient control of resources, various service QoS, and QoS control functions as the existing functions, but also QoS control real-time negotiation and dynamic adaptation in addition. This system consists of QoS Control Management Module(QoS CMM) in client side and QoS Management Module(QoS MM) in server side, respectively. These distributed modules are interfacing with each other via CORBA on different systems for distributed QoS management while serving distributed streaming applications. In phase of design of our system, we use UML(Unified Modeling Language) for designing each component in modules, their method calls and various detailed functions for controlling QoS of stream services. For implementation of our system, we used OrbixWeb 3.1c following CORBA specification on Solaris 2.5/2.7, Java language, Java Media Framework API 2.0 beta2, Mini-SQL 1.0.16 and the multimedia equipments, such as SunVideoPlus/Sun Video capture board and Sun Camera. Finally, we showed a numerical data controlled by real-time negotiation and adaptation procedures based on QoS map information to GUIs on client and server dynamically, while our distributed QoS management system is executing a given streaming service.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1703-1710
• /
• 2008

As the performance of digital camera keeps going on, the digital camera becomes into wide use recently so that the number of digital images taken by digital camera is increased rapidly. Given the augmentation of digital images, the digital photo frame has appeared for storing and enjoying the digital image and receives attention as the price of digital frame becomes down. However, users with the existing digital frame only could display the digital images and stream media stored in local disk. In the paper, we design and implement a new digital photo frame baled on ubiquitous which could provide a more variety of service to the user. With the proposed digital photo frame, the user could obtain the environment information and the digital image from multimedia sensor network. The users also could enjoy the various stream media stored in the remote streaming server seamlessly. In addition, the user could update the digital image through the web site at anywhere.

• Journal of Wetlands Research
• /
• v.14 no.1
• /
• pp.75-87
• /
• 2012

Hyporheic zone is a region beneath and alongside a stream, river, or lake bed, where there is mixing of shallow groundwater and surfacewater. Hyporheic exchange controls a variety of physical, biogeochemical and thermal processes, and provides unique ecotones in a aquatic ecosystem. Field and experimental observations, and modeling studies indicate that hyporheic exchange is mainly in response to pressure gradients driven by the geomorphological features of stream beds. In the reach scale of a stream, pool-riffle structures dominate the exchange patterns. Flow over a pool-riffle sequence develops recirculation zones and stagnation points, and this flow structures make irregular pressure gradient which is driving force of the hyporheic exchange. In this study, 3 D hydro-dynamic model solves the Reynolds-averaged Navier-Stokes equations for the surface water and Darcy's Law and the continuity equation for ground water. The two sets of equations are coupled via the pressure distribution along the interface. Simulation results show that recirculation zones and stagnation points in the pool-riffle structures dominantly control the upwelling and downwelling patterns. With decrease of recirculation zones, length of donwelling zone formed in front of riffles is reduced and position of maximum downwelling point moves downward. The numerical simulation could successfully predict the behavior of hyporheic exchange and contribute the field study, river management and restoration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12A
• /
• pp.2027-2035
• /
• 2001

In this paper, we present an audio stream delivery using the AMR (Adaptive Multi-Rate) coder that was adopted by ETSI and 3GPP as a standard vocoder for next generation IMT-2000 service in which includes combined sender (FEC) and receiver reconstruction technique in the Internet. By use of the media-specific FEC scheme, the possibility to recover lost packets can be much increased due to the addition of repair data to a main data stream, by which the contents of lost packets can be recovered. The AMR codec is based on the code-excited linear predictive (CELP) coding model. So we use a frame erasure concealment for CELP-based coders. The proposed scheme is evaluated with ITU-T G.729 (CS-ACELP) coder and AMR - 12.2 kbit/s through the SNR (Signal to Noise Ratio) and the MOS (Mean Opinion Score) test. The proposed scheme provides 1.1 higher in Mean Opinion Score value and 5.61 dB higher than AMR - 12.2 kbit/s in terms of SNR in 10% packet loss, and maintains the communicab1e quality speech at frame erasure rates lop to 20%.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.520-529
• /
• 2011

In this paper, we propose the extension of the MPEG-2 Transport Stream (TS) header for efficient adaptation of multi-layer coded video such as scalable video coding (SVC) and multiview video coding (MVC) in the HTTP streaming. First of all, the limit of the existing TS in terms of flexible adaptation of multi-layer video is investigated, and the signaling by extending TS header is proposed to provide efficient adaptation in a TS level. The proposed extension utilizes the private data field in the adaptation field of TS header to signal scalability and/or view information, which enable us to support diverse adaptation that suits underlying constraints of client capabilities, network conditions and user preferences. In short, the extension enables adaptation of scalable video with full scalability as well as view selection of multiview video in a TS level while keeping backward compatibility with the existing TS syntax/semantics. The performance of the proposed extension is compared with the existing adaptation using PID (packet ID) in terms of efficiency and complexity of adaptation. Furthermore, the increase of TS overhead caused by proposed extension is analyzed and an extension scheme to minimized the overhead is proposed.

• Journal of Environmental Impact Assessment
• /
• v.20 no.6
• /
• pp.815-821
• /
• 2011

This study aims to estimate the biological decomposition capacity of MPC(Microorganism Porous-Concrete). MPC has specific surface area formed by inside pores, and bio compound was added to those pores to reduce pollutants loading. To evaluate the water purification capacity of MPC, we carried out the comparative studies using different media types [GPC(General Porous-concrete), CPC(Compound porous-concrete), LPC(Lightweight aggregate porous-concrete)] under the condition of CFSTR, and different retention times (30, 60 and 120 min). We also estimated the purification capacity of MPC under different concentrations of pollutant loadings. The MPC showed higher efficiency in water purification function than other conventional porous concretes with efficient decrease rates of SS, BOD, COD, and nutrient concentrations. In the comparison experiment for different retention times, MPC showed the highest removal efficiency for all tested pollutants in the longest retention time(120 min). In the long period test, the removal efficiencies of MPC concrete were high until 100 days after the set up of the operation, but began to decrease. Outflow flux was invariable compared with inflow flux so that extra detention time for media fouling such as back washing is not needed. But the results suggested that appropriate management is necessary for long-term operation of MPC. As the final outcome, MPC using bio organisms is considered to be efficient for stream water purification when they used as substrates for artificial river structure.

• Journal of KIISE:Computing Practices and Letters
• /
• v.10 no.1
• /
• pp.114-124
• /
• 2004

In this paper, we present an automatic C source code generation system for DirectShow based multimedia application programming. In this system, C source code is automatically synthesized from the filter connection graph edited with GraphEdit, a utility tool provided with DirectShow SDK package from Microsoft. In traditional DirectShow programming environments, program design and brief testing steps are usually done with GraphEdit tool just by inserting filters and connecting them properly, while actual implementation of the program should be done separately. The filter connection graph information from GraphEdit is used just as a reference in such the implementation step. Therefore, our system which automatically generates C source code directly from the filter connection graph of GraphEdit seems very useful and many programmers can develop DirectShow based multimedia application programs more effectively and quickly using our system. In addition, our system supports more various media stream control functions for the generated application programs than the existing system such as Wizard which supports limited and fixed number of media control functions only. This feature allows more flexibility in the user interface of the generated source program and makes our system more practical for DirectShow based programming.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.117-125
• /
• 2010

Development of digital media and computer graphics related research had changed the overall stream of cultural art and our daily life, as well as its development also had an effect on a fresh and exciting area of cultural arts such as the new media art, interactive art and real-time performing. In this paper, we used emotional expression techniques that they lead audiences on the process of natural communication by combining the particle system of computer graphics with performance based screen art. In this paper, we used emotional expression techniques that they lead audiences on the process of natural communication by combining the particle system of computer graphics with performance based screen art. Namely, by capturing the creation and location speed of particle which is synchronized between the sound, behavior and particles, performance based screen art as the form of the experimental structure in which is combined with scientific technology and art is therefore proposed.