• 수산해양기술연구
• /
• 제56권2호
• /
• pp.138-146
• /
• 2020

Stow net fishery is one of the fishery with high fishing work accidents in southwestern sea of Korea. We conducted to serve as basic data for improving the healthy and safe working environment of fisher using risk assessment process (ISO45001) with fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) from 2016 to 2018. The average occurrence rate of victim in this fishery was 9.04%, 16.7 times more than such rate in all industries. In addition, the average fatality rate was found to have a very serious level management to 31.06‱, 27.7 times more than such rate in all industries. The safety hazards of stow net fishery was more likely to occur by other general industrial groups, with more severe consequences after the accident. According to 4M analysis, 58.6% of all accidents were caused by human factors, 24.0% by environmental factors, 16.0% by mechanical factors, and 1.5% by managerial factors, respectively. The occurrence frequency by accident type was the highest in 187 cases (32.2%) for struck by object, 158 cases (27.2%) for slipping, and 94 cases (16.2%) for being in contact with machinery. Severity is the highest for others such as diseases etc., in the order of being struck by object, being in contact with machinery, falling from above slipping, collapsing, bumping, and burning. Being struck by object, being in contact with machinery, and slipping are high-risk groups, falling from above others, bumping, and burning are medium-risk groups based on the risk assessment using the occurrence frequency and severity of accident. The obtained results are expected to contribute to the safe operation environment subsidy for fishing crews on the stow net fishing vessel.

• 수산해양기술연구
• /
• 제56권2호
• /
• pp.147-154
• /
• 2020

The questionnaire survey was carried out to collect basic data to identify the cause of the risk that did not appear in the current data provided by the fishermen's occupational accidents of the National Federation of Fisheries Cooperative (NFFC) to the onsite specialist, such as a fishing master, chief engineer and fisher in stow net fishing vessel from June to July 2018. The results are as follows. A total of 134 cases were surveyed, including 53 cases in Yeosu, 44 cases in Mokpo, 30 cases in Boryeong and 7 cases in Gunsan. Approximately 60% of the respondents on board the stow net fishing vessel were more than 20 years old, and the boarding experience was seasoned and suitable for the respondents. In the 4M analysis by safety accident factor during fishing work, the mechanical factors included 51 cases (25.0%) of decrepit equipment or poor maintenance and 49 cases (24.0%) of systemic error of fishing equipment. The environmental factors exhibited 71 cases (33.5%) of poor communication by mixed manning of foreign fishermen and 63 cases (29.7%) of poor environment such as heavy weather etc. The human factors showed 78 cases (37.3%) of personnel's carelessness and 45 cases (21.5%) of unskillfulness of operating net and haulers. The management factors exhibited 59 cases (32.1%) of work practice of poor safety precautions and 56 cases (30.4%) of inadequacy of education on hazard factor. The results are expected to contribute to the creation of a safe operating environment for stow net fishery, such as a fisher boarding a stow net fishing vessel, enabling the analysis of major causes of working safety accidents by cause.

• Smart Structures and Systems
• /
• 제18권1호
• /
• pp.75-92
• /
• 2016

The design of a semi-active (SA) control system addressed to mitigate wind induced structural demand to high wind turbine towers is discussed herein. Actually, the remarkable growth in height of wind turbines in the last decades, for a higher production of electricity, makes this issue pressing than ever. The main objective is limiting bending moment demand by relaxing the base restraint, without increasing the top displacement, so reducing the incidence of harmful "p-delta" effects. A variable restraint at the base, able to modify in real time its mechanical properties according to the instantaneous response of the tower, is proposed. It is made of a smooth hinge with additional elastic stiffness and variable damping respectively given by springs and SA magnetorheological (MR) dampers installed in parallel. The idea has been physically realized at the Denmark Technical University where a 1/20 scale model of a real, one hundred meters tall wind turbine has been assumed as case study for shaking table tests. A special control algorithm has been purposely designed to drive MR dampers. Starting from the results of preliminary laboratory tests, a finite element model of such structure has been calibrated so as to develop several numerical simulations addressed to calibrate the controller, i.e., to achieve as much as possible different, even conflicting, structural goals. The results are definitely encouraging, since the best configuration of the controller leaded to about 80% of reduction of base stress, as well as to about 30% of reduction of top displacement in respect to the fixed base case.

• Elastomers and Composites
• /
• 제35권2호
• /
• pp.115-121
• /
• 2000

일반적인 고무가공 공정에 비해 열가소성 고무 (Thermoplastic Elastomer: TPE)의 가공은 재료가 공공정의 단축, 생산공정의 간소화, scrap의 재활용 둥의 장점과 이에 따른 불량률 저하에 의한 폐기물감소, 제조원가 감소 및 부가가치성을 높일 수 있어 국제 경쟁력 확보에 유리하다. 본 연구에서는 Ethylene propylene diene monomer (EPDM)고무와 polypropylene을 사용하여 동적가교 (dynamic vulcanization)에 의해 블렌드를 제조한 후, glass insert molding법을 이용하여 fixed glass weather-strip을 성형하였다. 성형품의 기계적인 특성을 조사하기 위하여 인장강도, 신장율. 경도, 비중을 측정하였으며, mixing 상태는 SEM 사진을 통하여 관찰하였다. TPE molding 부분과 glass를 일체 성형하므로써 공정의 효율성에 대한 기여 및 생산 자동화에 유리할 것으로 기대한다.

• 대한화장품학회지
• /
• 제32권2호
• /
• pp.123-127
• /
• 2006

건강하고 병력이 없는 피부를 가진 한국인 여성 중 주름이 생성되기 시작하거나 이미 생성된 30대 33명, 40대 56명, 50대 6명 등 총 95명을 대상으로 눈가에 대한 피부 거칠기와 진피 치밀도 및 피부 두께 측정값간에 상관관계를 확인하였다. 피부거칠기는 Visiometer를 이용하여 5가지 파라미터(Rl, R2, R3, R4, R5)를 분석하였고, 피부 진피 치밀도는 초음파 영상 장치인 Dermascan C를 이용하여 진피 치밀도(intensity)와 피부 두께(distance)를 측정하여 분석하였다. 분석 결과 연령에 따라 피부 거칠기와 진피 치밀도 및 피부 두께간의 깊은 관련성을 확인하였다. 피부 주름 거칠기 파라미터 중에서는 R2 (Maximum roughness)가 피부 두께와 유의한 상관관계가 있었으며(p < 0.05) 또한, 진피 치밀도가 증가함에 따라 피부 두께는 유의하게 감소하는 경향을 보였다(p < 0.05). 따라서 주름 측정 방법에 있어서 기존의 레플리카를 이용한 피부 거칠기 평가 기술과 더불어 진피층의 변화를 측정하는 진피 치밀도 평가 기술은 주름 평가에 매우 유용한 방법이라고 판단된다.

• 태양에너지
• /
• 제10권2호
• /
• pp.18-27
• /
• 1990

태양열과 프레온 R-12 기체 압축열 복합온수기를 개발하여 실용화할 수 있도록 했으며 개발 내용은 다음과 같다. 가. 라디에타형 집열기와 평판형 집열기를 고안하여 프레온 R-12 기체와 액체가 상변이를 하면서 순환하여 태양복사열과 간접복사열을 흡수하고 대기의 대류접촉전열을 통해 대기열을 효과적으로 흡수하도록 개발했다. 나. 저장조하부에 압축기를 위치하도록 하고 압축기 가동시 발생하는 압축기의 표면열과 압축기에서 발생된 기체열이 가장 효과적으로 저장조내에 주입되도록 압축기와 저장조내에 위치한 열교환기의 연결관을 축소화했다. 다. 저장조내에 압축된 기체로부터 열교환을 더욱 효과적으로 하기 위해 열교환기를 새로 고안하여 개발했다. 라. 2801, $50^{\circ}C$ 온수를 매일 생산하도록 하여도 혹한기에 월 6,000원 이하의 전기료가 소요됨을 실측했다. 마. 프레온 R-12 순환시스템으로 우리나라의 기후에서 태양열온수기 제작에 최대 장애요인인 동파문제를 완전제거 할 수 있었고 조작이 완전자동이며 하자 발생요인이 거의 없고 수명이 길며 제작단가가 낮아 보급에 큰 잇점이 있을 것임을 확인했다.

• 한국염색가공학회지
• /
• 제29권2호
• /
• pp.86-96
• /
• 2017

To make uniform pressure distributed over the contact surface was necessary to cold pad batch dyeing machine. In this study, to confirm characteristic of flexibility and the contact pressure distribution through experimental analysis of padder roll were controlled by hydraulic cell. When there were no load pressure only inner pressure, the value of displacement in the center of padder were greater than the end of the padder. The results of this study showed that the padder had the optimum value of inner pressure for uniform contact pressure distribution. Measuring the contact pressure in a padder system were driven by using a pre-scale film. Uniform contact pressure distribution of cell padder were a linearly with load pressure and inner pressure. When the load pressure was less than 8 tons, the inner pressure for the uniform contact pressure was 1~4 bar. The padder roll performance curves proposed in this study were available for practical production environments and various roll designs.

• Design & Manufacturing
• /
• 제11권3호
• /
• pp.46-50
• /
• 2017

Press processing is one of the best machining methods capable of mass production, satisfying dimensional, shape and quality among the methods of processing a metal plate. Among them, Fine blanking is a method of obtaining a precise cross-section such as machining of the shear surface shape. In this research, Using SCP-1 and SHP-1 materials. The deformation behaviors of the material flow affecting the die height of the shear section in accordance with the position of the V-ring in the Fine blanking were compared and analyzed. Result of interpretation, It was confirmed that the force acts on the position where the material flow direction accurately forms the die roll that the material of SCP-1 is at a position of 1.5 mm and the material of SHP-1 is at 2.0 mm. As a result, it was confirmed that the state of fo1111ing the shear surface by the V-ring was excellent. Using analysis results, In the experiment, the height of the die roll was considered by applying The position of the V-ring was 1.5 mm in SCP-1 and 2.0 mm in SHP-1. As a result of comparing the height of the die rolls, the height values of the die rolls were different from each other, It has been considered that the tendency of the die rolls to coincide with each other. It is considered that the difference of the die roll height is caused by the pressure input of the V-ring. In this study, the deformation behavior of the material(In addition to the position of the V-ring, the flow direction of the material depends on the shape of the V-ring and the Indentation amount) is considered to be an important factor in determining die roll height.

• 공업화학
• /
• 제22권2호
• /
• pp.125-132
• /
• 2011

본 연구에서는 차세대 연료전지 기술로서 일체형 재생 연료전지(Unitized Regenerative Fuel Cell, URFC)에 대하여 검토하였다. URFC는 신재생 에너지원과 연료전지의 하이브리드 시스템 구현을 목적으로 하는 필수 기술이며 21세기 수소경제 사회 완성을 위한 신기술로 평가된다. 특히 본 연구에서는 URFC 요소 기술로서 고분자 전해질 막에 대한 연구 결과를 정리하여 URFC 기술의 이해를 돕고자 하는 것이 목적이다. URFC용 고분자 전해질 막은 기능적 특성상 높은 수소이온 전도도, 치수안정성, 기계적 물성 및 계면 안정성이 요구된다. 이를 바탕으로 미래 에너지원인 수소의 생산, 저장, 이용을 일체화된 시스템으로 완성시킬 수 있는 URFC 기술은 향후 연료전지 기술과 더불어 풍력과 태양광 발전 등의 신재생 에너지 관련 기술을 함께 발전시킬 수 있는 새로운 연구 분야가 될 것으로 판단된다.

• 수산해양기술연구
• /
• 제58권4호
• /
• pp.367-373
• /
• 2022

We analyzed work safety risk factors, which are likely to occur during fishing in gillnet fishing vessels using the written verdict of the Korea Maritime Safety Tribunal from 2016 to 2020, and considered work safety management. Of the total of 37 fatal accidents, three cases in the East Sea, six cases in the South Sea, and 28 cases in the West Sea were very frequent. The accident rate per vessel by sea area (%) was 0.08% in East Sea, 0.12% in South Sea, and 0.40% in the West Sea. Based on the East Sea, the number of fatal accidents was 1.6 times higher in the South Sea and 5.4 times higher in the West Sea. Six cases (16.2%) occurred during departure and preparation for fishing in the fishing process, and all other 31 cases (83.8%) occurred during fishing operation. In the order of accident types, 21 cases (56.8%) of being struck by object, eight cases (21.6%) of contact with machinery and six cases (16.2%) of falls from height were found to be fatal accidents in gillnet fishery. Human factors, such as fishers' carelessness and negligent safety management by captain accounted for 27 cases (73.0%) of the main cause, and 35 cases (94.6%) of the secondary cause. In addition to human factors such as fisher's carelessness and negligent safety management by captain, mechanical factors, environmental factors and management factors must be improved together to reduce human casualties. These results are expected to be utilized as basic data for reducing safety accidents during the work of fishers.