본 연구의 목적은 아말감과 복합레진의 수복 과정과 수복 후 상아세관액의 흐름(dentinal fluid flow, DFF)을 측정하기 위함이다. 치근을 절제한 제 3 대구치를 자체 제작한 미세 유체 흐름 측정장치에 연결한 후 1급 와동을 형성하여 아말감과 복합레진 수복을 시행하였다. DFF의 측정은 와동 형성부터 수복 후 30분까지 연속적으로 이루어졌고, 수복 후 3, 7일에 재 측정하였다. 주수 하에 와동 형성 시 DFF는 inward로, 끝난 후에는 outward로 바뀌었다. 아말감 충전 시 DFF는 inward로 바뀌었고 충전 완료 후 미약한 outward DFF를 보였다. 복합레진 수복의 경우, 산 처리 후 수세와 건조 시 각각 inward와 outward DFF를 보였고 primer도포 후 공기 분사는 급격한 outward, 소수성 본딩제를 적용하는 단계에서는 outward 였던 DFF가 감소하여 0에 가까워지거나 약간 inward 흐름을 보였다. 접착제와 복합레진의 광중합은 급격한 inward의 DFF를 일으켰다. 수복 후 30분, 3일, 7일째 수복 재료에 따른 DFF의 감소에 통계적으로 유의한 차이는 없었다 (p>0.05).
본 논문은 생체신호 (체온, 혈압, 맥박 등)를 측정하는 웨어러블 (Wearable) 디바이스에 장착된 인체 부착용 방사패턴 재구성 안테나의 통신성능 비교에 관한 논문이다. 제안된 안테나의 동작주파수는 블루투스 (Bluetooth) 통신 대역의 2.4 - 2.5 GHz 이며, 안테나의 최대이득은 1.96 dBi 이다. 제안된 안테나는 두 개의 RF 스위치 (PIN diode)를 이용하여 서로 반대방향의 빔을 생성하여 전자기파 신호를 효율적으로 송수신 한다. 또한 제안된 안테나는 탑 로딩(Top Loading)을 이용 세 가지의 각도 변경 ($30^{\circ}$, $90^{\circ}$, $150^{\circ}$)을 통해 각 방사패턴의 지향성 변화를 조사 하였다. 본 논문에서는 방사패턴 재구성 안테나를 통해 전파 간섭이 없는 전자파 차페실의 이상적인 전파환경과 실제 전파간섭이 존재 (Universal Software Radio Peripheral, USRP)하는 스마트 하우스 내에서 웨어러블 디바이스 안테나의 신호대 집음비 (Signal-to-Noise Ratio, SNR) 및 비트 에러율 (Bit Error Rate, BER) 성능 측정을 진행하였다. 두 경우의 측정 비교 시 SNR은 평균적으로 5 dB의 성능저하를 보이며, BER은 최대 10배 증가하여 수신 에러율 (Error rate of receiving signal)이 높아지는 것을 확인하였으며, 본 논문에서 측정한 SNR과 BER의 측정 결과로 전자파기기의 방해전파로 인한 성능저하를 수치상으로 예측 하였다.
PURPOSES : This research investigates traffic noise characteristics as change the transverse rumble strips shape from rectangular to cylinder at toll plaza of highway. METHODS : The traffic noise was investigated at two different places at toll plaza of highway. One is modified grooving, another is employed cylinder shape of TRS instead of rectangular shape of TRS. A measurement of traffic noise was conducted at same location and time period. The traffic volume information was gotten from office of highway office and vehicle speed was measured by speed measuring device. The traffic noise measurement was conducted from 13:00 to 23:00 and by pass-by method. Also, the traffic noise was measured behind noise barrier. Various distance from noise barrier(7.5m, 30m, 50m) and different heights(1.2m, 3m, and 5m) were parameter for measurement of traffic noise in this study. RESULTS : The class 1 vehicle was contributed from traffic volume which was increased 1,500. However, the distribution of traffic speed didn't change compare to previous investigated period. From this study, It was found that the external traffic noise was changed as function of geometric shape of TRS. The external noise from modified grooving was less than 1.2dB(A) of the current TRS. A difference of traffic noise was 20dB(A) before and after barrier. It came from a noise barrier effect as reduction of traffic noise. According to investigate a traffic noise distribution near barrier, there is similar noise characteristic as function of height at 7.5m distance from noise barrier. Also, There is no different traffic noise between 30m and 50m from source of the noise of sound barrier. CONCLUSIONS : Based on this traffic noise investigation result, there is a clear characteristic difference as changed TRS shape. The traffic noise was reduced by changed TRS shape. Specially, traffic noise was decreased although the traffic volume was increase for same investigation time and period. It is implied that cylinder type of TRS significantly reduces the traffic noise. The specification of various TRS will be studied in the future.
Objectives: This study investigated the performance of three separate units of a portable photoionization detector (PID, ppb-RAE 3000) for measuring volatile organic compounds (VOCs) in a laboratory. Methods: A laboratory evaluation of the accuracy, precision, and inter-instrumental variance of three separate units of a portable PID (ppb-RAE 3000) was performed. The evaluation was based on the preparation of a test air sample of known toluene or ethylacetate concentration in a Tedlar$^{(R)}$ bag. The test air sample was monitored and data were logged consecutively by the three PIDs. A certified gas of 50 ppm toluene was also monitored during the test to ensure the reliability of the generated test air sample. Four different concentrations ranging from 0.1 to 2 TLV were used and a series of five measurements for each concentration level was performed. The accuracy was evaluated using National Institute for Occupational Safety and Health (NIOSH) criteria. Results: The results from the oldest ppb-RAE3000 unit among the three test units generally fell outside the NIOSH recommended accuracy criteria of ${\pm}25%$, whereas the other two units produced results which were acceptable at, or greater than, 25 ppm of toluene, or 0.5 TLV. These units also met the NIOSH criteria for some ethylacetate measurements but the results were not consistent. Conclusions: Considering the inconsistent performance of these ppb-RAE 3000 units, this device may not be appropriate for use as an alternative to the standard measurement methods. However, it can serve good survey instruments to identify exposure sources or concentration profiles. For all applications, the ppb-RAE 3000 should be used with frequent calibration checks, additional validation using a reference material, and careful maintenance.
반도체 산업은 우리나라 주력산업중 하나로 매년 꾸준한 성장세를 보이며 지속적인 성장을 하고 있다. 이러한 반도체 산업에서의 중요한 기술은 소자의 고 집적화이다. 이는 면적당 메모리 용량을 증가시키는 것으로 핵심역할을 하는 것이 바로 포토리소그래피 기술이다. 포토리소그래피란 마스크의 표면에 빛을 쬐어 생기는 그림자를 웨이퍼 상에 인쇄하는 기술이며 반도체 제조공정에서의 가장 중요한 공정이다. 이러한 공정을 통해 나온 패터닝을 분석 시에 폭과 단차의 균일성을 측정한다. 이에 따라 본 논문은 포토리소그래피 공정이 적용된 시험편 패터닝에 폭과 판 사이와의 단차를 투과형 디지털 홀로그래피를 구성하여 측정하고자 한다. 투과형 디지털 홀로그래피 간섭계를 구성하고 시험편에 임의의 9포인트를 설정하여 각 포인트를 측정하고 상용장비인 SEM (scanning electron microscopy)과 alpha step으로 측정한 결과와 비교하고자 한다. 투과형 디지털 홀로그래피는 측정시간이 타 기법에 비에 짧다는 장점과 배율렌즈를 사용하기 때문에 저 배율에서 고 배율로 변경하여 측정할 수 있는 장점을 가지고 있다. 실험 결과로부터 투과형 디지털 홀로그래피가 포토 리소그래피가 적용된 패터닝 측정에 유용한 기술임을 확인할 수 있었다.
이 논문에서는 IEEE 802.15.4 노드들이 WiFi 트래픽의 간섭을 피해 새로운 채널에서 동작하기 위해 다수의 IEEE 802.15.4 채널들에 대한 병렬적인 백오프지연과정과 WiFi 트래픽의 주파수 스펙트럼을 고려한 채널탐색방법에 연구되었다. WiFi 트래픽에 의해 점유되는 채널들을 탐색하기 위해, 인접한 채널들에 대한 전력을 동시에 측정하는 방법, 기준보다 큰 채널전력의 지속시간을 확인하는 방법, RSSI 샘플 데이터에 대한 신호처리로 비콘 프레임과 같은 주기성을 찾는 방법에 대해 분석되었다. IEEE 802.11 네트워크와 중첩된 무선채널에서 IEEE 802.15.4 노드들의 CSMA-CA 알고리즘의 동작에 대해서 설명하였다. 하나의 IEEE 802.15.4 장치로 다수의 IEEE 802.15.4 채널에 대해 병렬적으로 백오프지연과정을 수행하는 방법을 그 알고리즘의 설명과 함께 제안하였다. 제안된 방법이 구현된 실험시스템으로 측정된 데이터를 분석할 때, WiFi 트래픽이 발생될 때 이와 연관된 다수의 인접한 IEEE 802.15.4 채널에서 매체접근지연시간이 동시에 증가하는 것으로 관찰되었다. IEEE 802.15.4의 채널에서 다른 트래픽에 의한 간섭을 판단하기 위한 채널평가함수를 정의하였다. WiFi에 의해 간섭을 받는 IEEE 802.15.4 채널들을 탐색하기 위해 인접채널들에 대한 채널평가를 함께 고려하는 채널탐색방법을 제시하였고 실험결과는 WiFi에 의해 간섭이 일어나는 채널들을 올바르게 찾는 특성을 보인다.
본 실험에서는 자돈을 대상으로 비정상 체온의 판정을 위한 알고리즘 개발에 활용할 정상상황에서의 표피 (귀, 목, 머리) 및 심부 체온의 database를 구축하였다. 평균체중 46kg의 자돈 5두를 공시하여 $22.5{\pm}2.0^{\circ}C$로 설정된 이유 자돈사에 설치한 개별 케이지에 2주간 적응시킨 후, 귀, 목 및 머리의 피부온도와 심부 (피하지방) 체온, 그리고 돈사내 온도를 1 mm k-type 열전대와 National Instruments Corporation (Austin, Texas, USA)의 장치 (cDAQ-9174, NI-9214, 9214TB)를 이용하여 1분 간격으로 17일간 연속하여 측정하였다. 수집된 체온 data는 24시간 단위로 통합하여 매 시간대별 평균 및 표준편차를 산출했다. 모든 측정 site의 하루 중 체온의 변화는 오전 6시에 가장 낮은 값으로 나타났으며 이후 점점 증가하다가 14시에 가장 높은 값을 보였고 그 후 익일 오전 6시까지 서서히 떨어졌다. 이런 변화 pattern은 외부온도의 변화와 일치하였다. 심부의 체온은 $35{\sim}39^{\circ}C$의 범위로 변화가 적은 반면에 목과 머리는 각각 $32{\sim}36^{\circ}C$, $30{\sim}36^{\circ}C$이고, 귀는 $29{\sim}36^{\circ}C$로 변화 폭이 컸다. 귀의 경우 가장 낮은 값은 자돈의 활동이 가장 적은 새벽시간이었으며, 새벽시간대를 제외한다면 귀, 목, 머리의 체온은 대체적으로 같은 범위의 온도 값을, 심부는 체온의 가장 근접한 값을 나타내고 있다. 이 연구를 통해 축적된 자돈의 표피 (귀, 목, 머리)와 심부 체온의 databse는 RFID (radio frequency identification device)를 이용한 동물의 비정상 체온의 전자적 감지를 위한 알고리즘 개발에 활용 할 수 있을 것으로 사료된다.
Objective: The purpose of this study was to investigate the viscoelastic properties related to handling characteristics of composite resins, Methods: A custom designed vertical oscillation rheometer (VOR) was used for rheological measurements of composites. The VOR consists of three parts: (1) a measuring unit, (2) a deformation induction unit and (3) a force detecting unit, Two medium viscous composites, Z100 and Z250 and two packable composites, P60 and SureFil were tested. The viscoelastic material function, including complex modulus $E^{*}$ and phase angle ${\delta}$, were measured. A dynamic oscillatory test was used to evaluate the storage modulus (E'), loss modulus (E") and loss tangent ($tan{\delta}$) of the composites as a function of frequency ($\omega$) from 0.1 to 20 Hz at $23^{\circ}C$. Results: The E' and E" increased with increasing frequency and showed differences in magnitude between brands. The $E^{*}s$ of composites at ${\omega}{\;}={\;}2{\;}Hz$, normalized to that of Z100, were 2.16 (Z250), 4,80 (P60) and 25.21 (SureFil). The magnitudes and patterns of the change of $tan{\delta}$ of composites with increasing frequency were significantly different between brands. The relationships between the complex modulus $E^{*}$, the phase angle ${\delta}$ and the frequency \omega were represented by frequency domain phasor form, $E^{*}{\;}(\omega){\;}={\;}E^{*}e^{i{\delta}}{\;}={\;}E^{*}{\angle}{\delta}$. Conclusions: The viscoelasticity of composites that influences handling characteristics is significant different between brands, The VOR is a relatively simple device for dynamic, mechanical analysis of high viscous dental composites. The locus of frequency domain phasor plots in a complex plane is a valuable method of representing the viscoelastic properties of composites.
Lee, Hyun Young;Park, Ji Hyun;Lee, Cheol-Min;Kang, Dae Ryong
Journal of health informatics and statistics
/
제42권4호
/
pp.309-316
/
2017
라돈 및 그 자손은 폐암을 일으키는 환경적 위험인자로, 일상 활동 및 수면 등으로 많은 시간을 보내는 실내 라돈 농도 관리는 필수적이다. 이를 위해서는, 주거지를 둘러싼 개인적, 사회적, 환경적 요소에 대한 총체적 접근이 필요하다. 따라서 본 연구는 실내 라돈 농도에 영향을 미치는 다양한 인자를 찾아내고, 이를 활용한 포괄적 모델을 구축하고자 한다. 건축 자재 및 생활 양식을 포함한 주거 환경에 대한 자료를 얻기 위해 설문을 실시하였고, 의사결정트리 및 구조 방정식 모델링을 활용하였다. 그 결과 주거지 주변 녹지 비율, 불 투과성 층 비율, 주택과 지면의 맞닿은 상태, 매일 환기 습관, 난방 습관, 측정 장치 주위의 균열 및 침실여부는 실내 라돈 농도와 유의한 연관성을 보였다. 매일 환기 습관을 가질 경우 실내 라돈 농도가 $200Bq/m^3$ 이상인 비율이 11.6%로 줄었다. 한편 매일 환기습관이 없는 주거자의 주거지 주변 녹지 비율이 65% 이상이면 매일 환기 습관이 있는 주거자와 비교하여 15.3%의 비율이 증가하였다. 구축된 포괄적 모델의 실내 라돈 농도에 직접 영향을 미치는 인자는 주거지 주변 녹지 비율과 환기율이었다. 제시된 모델로 국내 라돈 농도에 대한 개인의 지리적 특성, 지하수 및 생활 양식 요소의 결합된 영향을 확인할 수 있었다.
본 연구에서는 기존의 ridge waveguide laser diode(RWG LD)보다 ridge폭에 따른 측방향 단일모드 특성이 우수하고 planar 화에 유리하며 측방향의 유효 굴절률차를 ridge 구조에 추가로 성장된 InGaAsP층의 두께로 조절이 가능한 Buried RWG LD를제작하였다. 본 연구에서는 Buried RWG LD를 CBE장치로 InGaAs/InGaAsP multiple quantum well(MQW) 에피 웨이퍼를 성장하고, LPE로 재성장하여 B-RWG LD를 제작하였다. 또한 ridge 폭을 5 $\mu\textrm{m}$와 7 $\mu\textrm{m}$로 하여 B-RWG LD를 제작하고 특성을 비교하여 보았다. 제작된 7 $\mu\textrm{m}$ B-RWG LD에서 광출력이 20㎽에 이를 때까지 고차모드 발진에 의한 kink현상이 일어나지 않았으며, 포화 광출력이 80 ㎽ 이상임을 확인하였다. 제작된 B-RWG LD가 측방향 단일모드로 동작함을 확인하기 위해 FFP을 측정한 결과, ridge 폭이 5 $\mu\textrm{m}$일 때는 2.7I$_{th}$ , ridge 폭이 7 $\mu\textrm{m}$일 때는 2.4I$_{th}$ 까지 단일모드로 동작함을 확인할 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.