• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.1
• /
• pp.58-70
• /
• 2001

For the successful treatment of complete denture, obtaining a good retention is essential. There are lots of factors affecting denture retention. Denture material, one of those factors affecting denture retention, was the subject of this study, and internal surface treatment also considered for the method of enhancing denture retention. Two resin(Lucitone $199^{(R)}$(heat cured resin) Vertex $CP^{(R)}$(self cured resin)) and two metal($Biosil^{(R)}$(Co-Cr alloy), $Vitallium^{(R)}$(Co-Cr alloy)) denture base materials were used for making test denture base. Newly developed device was used for measuring denture retention. After the retention was measured. We treated internal surface of test denture base with $50{\mu}m\;Al_2O_3$ powder, under 90psi, for 1 minute. Then the retention was measured again. The result was analyzed with K-S test, one-way ANOVA test and independent t-test to deter mine the significant differences as the 95% level of confidence. The results are as follows : In cases of without internal surface treatment, the retention was increased in order of $Vitallium^{(R)},\;Biosil^{(R)},\;Vertex CP^{(R)}$ and Lucitone $199^{(R)}$. Except between Vertex $CP^{(R)}$ and $Biosil^{(R)}$, retention of the other materials was significantly different (p<0.05). After the treatment of internal surface, the retention was increased in order of $Vitallium^{(R)},\;Biosil^{(R)},\;Lucno\;199^{(R)},\;Vertex\;CP^{(R)}$. Except between Lucitone $199^{(R)}$ and Vertex $CP^{(R)}$, $Vitallium^{(R)}$ and $Biosil^{(R)}$ the retention of remaining groups was significantly different each other (p<0.05). In the matter of each material, after the internal surface treatment the retention was increased with Vertex $CP^{(R)},\;Biosil^{(R)}\;and\;Vitallium^{(R)}$ and the value of differences were statistically significant. When we compare the retention of resin and metal denture base, the retention of both denture bases increased significantly with internal surface treatment, and resin denture base showed better retention. As the results show, selecting denture base material could be an important choice of complete denture treatment. To increase denture retention, internal surface treatment can be considered as a possible method.

• Journal of Korean Clinical Health Science
• /
• v.4 no.4
• /
• pp.662-670
• /
• 2016

Purpose. Because of a recent increase in use of soft contact lens at younger ages, in the present study, the correlation between corneal eccentricity and radius of curvature and fitting types of contact lens was investigated. Methods. The study evaluated the fitting status of targets through lens centration, push-up test, dynamic lag test and static lag test of lenses usually worn by 49 men and women (98eyes) in their 20s to 30s who put on soft contact lenses. After evaluation, the subjects were classified into 3 categories by fitting status(steep, aligment and flat). The radius of corneal curvature in the naked eyes was measured by using keratometer. Moreover the corneal eccentricity in the nasal side, temporal side, superior side and inferior side was measured by using the device capable of measuring the corneal eccentricity. Results. The radius of corneal curvature and corneal eccentricity of soft lenses worn by subjects were higher in the order of steep fitting and flat fitting, and the higher average corneal curvature radius and corneal eccentricity is intend to be more steep fitting(p=0.051, p=0.052). The corneal eccentricity showed a tendency to nasal fitting type at the higher eccentricity and temporal fitting type at the smaller eccentricity, statistically significant difference was observed(p<0.05). The study showed there were low correlation that nasal and temporal side at steep fitting, superior side at normal fitting and 4side(nasal, temporal, superior, inferior) at flat fitting, therefore when the corneal eccentricity changed the radius of corneal curvature also changed. The corneal eccentricity and the radius of corneal curvature showed statistically significant difference at 4side and each fitting types(p<0.05). Conclusions. The results of this study, the fitting status, of wearer are based on radius of corneal curvature and corneal eccentricity, and if lens fitting would be done considering that, it seems to be useful in a soft contact lens prescription.

• Korean Journal of Optics and Photonics
• /
• v.24 no.4
• /
• pp.176-183
• /
• 2013

In this paper, we report the design, fabrication and characterization of the 3-Dimensional optical receiver for a Laser Detection And Ranging (LADAR) system. The optical receiver is composed of three parts; $16{\pm}16$ Geiger Mode InGaAs Avalanche Photodiode (APD) array device operated at 1560 nm wavelength, Read Out Integrated Circuit (ROIC) measuring the Time-Of-Flight (TOF) of the return signal reflected from target objects, a package and cooler maintaining the proper operational condition of the detector and control electronics. We can confirm that the LADAR system can detect the signal from a target up to 1.2 km away, and it showed low Dark Count Rate (DCR) of less than 140 kHz, and higher than 28%-Photon Detection Efficiency (PDE). This is considered to be the best performance of the $16{\pm}16$ FPA APD optical receiver for a LADAR system.

• Korean Journal of Agricultural Science
• /
• v.32 no.1
• /
• pp.29-42
• /
• 2005

During a long journey of agricultural products from the production area to markets, the quality of agricultural products was always affected by some degree of vibration. The vibration input during the transportation may cause serious agricultural product injury, and this damage is particularly severe whenever the vegetable inside package is free to bounce, and is vibrated at its resonant frequency. The objectives of this study were to determine the resonant frequency of the oriental melon and to investigate the relationships between resonant frequency and physical properties of the oriental melon such as mass, volume and major and minor axes. In this study vibration testing device was constructed to determine the vibration response of the oriental melon in frequency ranges of 5 to 150 Hz. The computer program for controlling the vibration shaker and the function generator and measuring the vibration characteristics of the oriental melon was developed. The ranges of resonant frequency and peak acceleration at resonance of the oriental melon were 51 to 73 Hz and 1.24 to 1.92 G-rms, respectively. The resonant frequency and the peak acceleration decreased with the increase of the sample mass, volume, major and minor axes of the oriental melon. Multiple regression models for resonant frequency and peak acceleration of the oriental melon as a function of mass, major axis and minor axis of the sample were developed and analyzed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.46 no.4
• /
• pp.343-352
• /
• 2019

Abnormal orofacial functions such as lip incompetency in the period of growth and development can cause morphological anomalies of the craniofacial complex. Therefore, it is crucial to make an early diagnosis based on the evaluation of the myofunctional conditions, and to make appropriate treatment plans. The objectives of this study were to quantitatively evaluate the standard lip closing force (LCF) of each age in the elementary school children, and to evaluate the relationships between LCF and affecting factors. The sample consisted of 765 children who were 7 - 12 years old in Jeonju city. Clinical examination about occlusal conditions and lip competency, and LCF measurement were performed by a single examiner. LCF was measured three times for each children with the LCF measuring device. The LCF was correlated positively with age in both sexes. The distribution of LCF groups was correlated significantly with Angle's classes and lip competency (p = 0.016, 0.004). The proportion of children with high LCFs was greater in the "competent lip" group, whereas the proportion of those with low LCFs was greater in the "incompetent lip" group.

• Trans-
• /
• v.4
• /
• pp.111-134
• /
• 2018

The purpose of this study is to understand the principles of Balletfit and its program structure and to establish Balletfit's effects on body shape change and postural correction. Interview, the most commonly used method of qualitative research, was chosen as the research method. Ten Balletfit class participants, who have attended private lessons twice per week, for three to six months period of time, were selected. These participants were chosen from participants of private lessons instead of group lessons for in-depth insights. The research was limited to a small group of participants and therefore, it is difficult to standardize the result. Also, because this study is based on the opinions of the participants, not by a posture measuring device, the accuracy of the result is limited as well. The followings are the conclusion of this research. First, the participation motive was either internet research or acquaintance's recommendation. Secondly, the effort to change the body shape. After experiencing Balletfit classes, the participants became aware of their body and made an effort to recover their posture by holding the stomach tight and sitting up correctly. Thirdly, their posture became ideal. Most participants became aware of what an ideal posture is and as their body became ideal, the participants also recovered their health by becoming aware of their inner and outer body. Lastly, they tend to prefer beautiful body line. After the experience, all participants became interested in the body line and preferred to build a beautiful body line with correct postures. The most significant effect of Balletfit was the body line. Therefore, the experience of Balletfit develops the inner and outer body awareness and also can be consider to effect the change of the body shape. Balletfit will become a satisfying exercise for modern people, who desire a beautiful, healthy body.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.3B
• /
• pp.275-286
• /
• 2011

As the 21st century paradigm of healthcare service changes from post-therapeutic treatment to disease prevention and management in advance, the M2M-based u-healthcare application service is increasingly important. M2M-based u-healthcare application service uses mobile handsets equipped with sensors to measure vital information, and the medical staff in remote locations can manage the health of the patient or the public in real time. In this paper, IEEE/HL7 translation gateway, utilizing the gateway based on M2M u-healthcare application service structure, which is based on international standards, has been designed and implemented. Specifically, the gateway between ISO/IEEE 11073 standards and ANSI HL7 has been developed. The former defines the protocol for the exchange of information between the agent device and the manger devices for measuring and handling biological signal, and the latter defines the application layer protocol for the exchange of various healthcare information systems. Finally, in order to demonstrate the functionality of the proposed architecture, the M2M-based U-healthcare application service based on IEEE/HL7 translation gateway, utilizing the gateway, has been developed which can measure, collect and process a variety of vital signs such as ECG or SpO2.

• Journal of Korea Game Society
• /
• v.11 no.5
• /
• pp.67-78
• /
• 2011

This paper introduces an efficient and satisfactory search interface that enables users to browse and find the video data they want from a massively huge video database widely used in various multimedia environment. The target user group is information analysts at US defense industry or governmental intelligence agencies whose job is to identify a certain person from a lot of video footage taken from CCTV(Closed-circuit Television) cameras. For the first user test, we suggested the CAVE-like virtual reality interface to be the most optimal for the tasks we designed for, so we compared this interface with desktop interface. The softwares and database developed and optimized for each task were used in this user test. For the second user test, we researched on what input devices would be most optimal for enhancing efficiency of search task in the CAVE-like virtual reality system. Especially we focused our effort on measuring the effectiveness and user satisfaction of three different types of devices that embody gestural interface input system that encourages users' ergonomic control of the interface. We also measured the time consumed for performing each task to find out the most efficient input device among the ones tested.

• Restorative Dentistry and Endodontics
• /
• v.34 no.6
• /
• pp.467-476
• /
• 2009

The aim of this study was to measure the dentinal tubular fluid flow (DFF) during and after amalgam and composite restorations. A newly designed fluid flow measurement instrument was made. A third molar cut at 3 mm apical from the CEJ was connected to the flow measuring device under a hydrostatic pressure of 15 $cmH_2O$. Class I cavity was prepared and restored with either amalgam (Copalite varnish and Bestaloy) or composite (Z-250 with ScotchBond MultiPurpose: MP, Single Bond 2: SB, Clearfil SE Bond: CE and Easy Bond: EB as bonding systems). The DFF was measured from the intact tooth state through restoration procedures to 30 minutes after restoration, and re-measured at 3 and 7days after restoration. Inward fluid flow (IF) during cavity preparation was followed by outward flow (OF) after preparation, In amalgam restoration, the OF changed to IF during amalgam filling and slight OF followed after finishing. In composite restoration, application CE and EB showed a continuous OF and air-dry increased rapidly the OF until light-curing, whereas in MP and SB, rinse and dry caused IF and OF, respectively. Application of hydrophobic bonding resin in MP and CE caused a decrease in flow rate or even slight IF. Light-curing of adhesive and composite showed an abrupt IF. There was no statistically significant difference in the reduction of DFF among the materials at 30 min. 3 and 7 days after restoration (p > 0.05).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.4125-4130
• /
• 2015

This paper presents the communication performance for the radiation pattern reconfigurable antenna in the wearable device measuring bio signal (temperature, blood pressure, pulse etc.) of human body. The operational frequency is 2.4 - 2.5 GHz, which covers Bluetooth communication bandwidth. The maximum gain of the antennas is 1.96 dBi. The proposed antenna is efficiently transmitting and receiving signal by generating two opposite beam directions using two RF switches (PIN diode). Also, we investigated how radiation pattern changes according to three angles ($30^{\circ}$, $90^{\circ}$, $150^{\circ}$) of Top Loading. In this paper, we measured and compared the SNR (Signal-to-Noise Ratio) and BER (Bit Error Rate) performances of the proposed antennas in the condition between an ideal environment of anechoic chamber and smart house existing practical electromagnetic interferences (Universal Software Radio Peripheral, USRP). Throughout the comparing the results of the measurement of two cases, we found that the SNR is degraded over 5dB in average and BER is increased over ten times in maximum, therefore, it is confirmed that the error rate of receiving signal is increased. The measured results of SNR and BER value in this paper able to expect the performance degrading by the interference from the electromagnetic devices.