• 제목/요약/키워드: Measuring Dielectric Constant

검색결과 96건 처리시간 0.027초

판형 유전체의 유전율 측정 방법 (Method for Measuring Dielectric Constant of Planar Dielectric Substrate)

  • 이창현;권택선;이정해
    • 한국전자파학회논문지
    • /
    • 제29권10호
    • /
    • pp.799-804
    • /
    • 2018
  • 본 논문에서는 일반 측정환경에서 자유공간 물질상수 측정법을 사용한 판형 유전체의 유전율 측정 방법을 제안한다. 측정에는 회로망분석기와 동일한 두 개의 혼 안테나가 S-parameter 측정을 위해 사용되었으며, 측정 결과로부터 판형 유전체의 투과 및 반사계수를 계산하였다. 정밀한 측정을 할 수 없는 환경에서 신뢰할 수 있는 유전율을 얻기 위하여 상대적으로 측정 환경에 의한 측정불확도가 작은 투과계수의 크기만을 유전율 추정에 이용하였으며, 최종적으로 다양한 주파수에서 측정된 결과를 비교하여 유전율을 특정하였다.

BTMSM/O2 유량변화에 따른 SiOCH 박막의 유전상수 특성 (Properties of SiOCH Thin Film Dielectric Constant by BTMSM/O2 Flow Rates)

  • 김종욱;황창수;김홍배
    • 한국전기전자재료학회논문지
    • /
    • 제21권4호
    • /
    • pp.362-367
    • /
    • 2008
  • We have Manufactured the low-k dielectric interlayer fabricated by plasma enhanced chemical vapor deposition (PECVD), The thin film of SiOCH is studied correlation between components and Dielectric constant. The precursor was evaporated and introduced with the flow rates from 16 sccm to 25 sccm by 1sccm step in the constant flow rate of 60 sccm $O_2$ in process chamber. The chemical characteristics of SiOCH were analyzed by measuring FT/IR absorption lines and obtained each dielectric constant measuring C-V. Then compare respectively. ILD of BTMSM/$O_2$ could have low dielectric constant about $k\sim2$, and react sensitively. Also dielectric constant could be decreased by the effects of decreasing $CH_3$ and growing Si-O-Si(C) after annealing process.

엔진오일의 유전상수 변화에 관한 연구 (A Study on the Changes in Dielectric Constant of Engine Oil)

  • 전상명
    • Tribology and Lubricants
    • /
    • 제22권2호
    • /
    • pp.99-104
    • /
    • 2006
  • The dielectric constants of fresh engine oils were obtained according to various types of oil, temperatures and frequencies. Through analyzing the characteristics of dielectric constant, the related correlation between the changes in dielectric constant of oil and the degree of oil deterioration is going to be found. The dielectric constant was calculated by cross capacitances measured by a sensor tube. Before finding the correlation, as a prerequisites study, the best condition measuring the dielectric constant was found. In general, it was found that the value of dielectric constant became stable below $60^{\circ}C$ regardless frequency variation. Further, above 6kHz, the dielectric constant became stable even if temperature had been above $100^{\circ}C$.

Stabilization of the Perovskite Phase and Electrical Properties of Ferroelectrics in the Pb2(Sc,Nb)O6 System

  • Kim, Yeon Jung
    • Applied Science and Convergence Technology
    • /
    • 제24권6호
    • /
    • pp.224-227
    • /
    • 2015
  • Ferroelectric $Pb_2(Sc,Nb)O_6$ were prepared under two different sintering conditions using the oxide mixing method and the electrical properties were measured. The sintering conditions were $1350^{\circ}C$ for 25 minutes and $1400^{\circ}C$ for 20 minutes. EDX spectroscopy and XRD were used to determine the crystalline characteristic of the $Pb_2(Sc,Nb)O_6$ compositions Pyrochlore phase showed about 2% in all $Pb_2(Sc,Nb)O_6$ specimens. It expands the growth of crystals in samples sintered at $1400^{\circ}C$ than $1350^{\circ}C$, but all samples were the optimal crystallization. The temperature and frequency dependence of the complex dielectric constant and admittance were measured to analyze the electrical properties. The high dielectric constant of the specimens reflects the good stoichiometry and crystallization. The maximum value of the dielectric constant in the two specimens treated with sintering at $1350^{\circ}C$ and $1400^{\circ}C$ were more than 27,000, and the dielectric loss at room temperature is smaller than 0.05. The maximum dielectric constant decreased with increasing frequency, the transition temperature also increased in $Pb_2(Sc,Nb)O_6$ compositions. The admittance and susceptance values reach a peak at all temperatures, and the magnitude of the peak increases with increasing measuring temperature. Strong frequency dependent of maximum admittance, susceptance, dielectric constant and dielectric loss were observed.

Negative Dielectrophoresis를 이용한 미세 입자의 유전율 측정 (Estimation of Dielectric Constant of Small Particles Using Negative Dielectrophoresis)

  • 이상욱;김용욱;김용권
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 추계학술대회 논문집 학회본부
    • /
    • pp.422-424
    • /
    • 1996
  • The dielectric constants of small particles are estimated using negative dielectrophoresis(DEP). A pair of cylindrical electrodes is proposed to produce a non-uniform electric field that levitates a dielectric particle. Measuring the height of the levitated particle, we can calculate the effective polarizability, and estimate the dielectric constant of the particle using a nonlinear regression method. By determining dielectric constant of polystyrene and polychloromethylstyrene particle, the proposed electrode structure and method show the possibility to measure the dielectric constants of dielectric particles.

  • PDF

수분함량과 측정주파수에 따른 사질토 지반의 유전상수 변화 (Variation of Dielectric Constant of Sand due to Water Content and Measuring Frequency)

  • 이주형;오명학;박준범;김형석
    • 한국지반공학회논문집
    • /
    • 제18권6호
    • /
    • pp.129-139
    • /
    • 2002
  • 최근 지반 특성과 지반 오염도의 조사를 위해 유전상수 측정기법을 적용하기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 다양한 함수비와 건조단위중량을 갖는 화강풍화토와 주문진표준사의 유전상수를 75kHz~12MHz의 주파수 범위에서 측정하였다. 사질토의 유전상수는 주파수가 증가함에 따라 감소하는 분산거동을 보였다. 또한 함수 비나 건조단위중량이 증가함에 따라 배향분극에 기여하는 물분자의 양이 증가하고 유전상수가 1인 공기의 양이 감소하여 유전상수가 증가하였다. 흙의 유전특성은 함수비와 건조단위중량을 모두 고려한 수분밀도에 선형적으로 비례하는 경향을 나타내었다. Maxwell식, Topp식, CRIM식에 의한 계산값과 측정된 값을 비교한 결과 기존의 식은 유전상수의 분산거동을 고려하지 못하고 있기 때문에 저주파에서는 측정값과 차이를 나타내었다.

$(Ba_xSr_{1-x})$TiO$_3$박막의 온도 변화에 따른 유전 특성 (Dielectric Properties with Temperature Variation of $(Ba_xSr_{1-x})$TiO$_3$Thin Films)

  • 김덕규;전장배;송민종;박춘배
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1997년도 춘계학술대회 논문집
    • /
    • pp.309-313
    • /
    • 1997
  • (Ba$_{x}$Sr$_{l-x}$)TiO$_3$(BST) thin fi1ms with various Ba/Sr ratios were deposited on Pt(80nm)/SiO$_2$(100nm)/Si by RF magnetron sputtering. BST thin films which have x=0.6, 0.5, 0.4 were studied dielectric properties with temperature variation. The frequency was used from 100Hz to 1MHz for measuring dielectric constant. The measurement conditions of dielectric constant with Temperature Variation were 1KHz and 2$0^{\circ}C$. As a result, the dielectric constant of BST thin film was about 425 and loss factor was 0.013. Also, with increasing Temperature, the dielectric constants of BST thin films were gradually decreased.sed.

  • PDF

유전상수 센서를 이용한 유압 작동유의 분석을 위한 실험장비 개발 (Development of Experimental Device for Analysis of Hydraulic Oil Characteristics with Dielectric Constant Sensors)

  • 홍성호
    • Tribology and Lubricants
    • /
    • 제37권2호
    • /
    • pp.41-47
    • /
    • 2021
  • An experimental device was developed for analysis of hydraulic oil characteristics with dielectric constant sensors. Online analysis is the most effective method of the three methods used for analyzing lubricant oils. This is because it can monitor the machine condition effectively using oil sensors in real time without requiring excellent analysis skill and eliminates human errors. Determining the oil quality usually requires complex laboratory equipment for measuring factors such as density, viscosity, base number, acid number, water content, additive, and wear debris. However, the electric constant is another indicator of oil quality that can be measured on-site. The electric constant is the ratio of the capacitance of a capacitor using that material as a dielectric, compared with a similar capacitor that has a vacuum as its dielectric. The electric constant affects the factors such as the base oil, additive, temperature, electric field frequency, water content, and contaminants. In this study, the tendency of the electric constant is investigated with a variation of temperature, water content, and dust weight. The experimental device can control working temperature and mix the contaminants with oil. A machine condition monitoring program developed to analyze hydraulic oil is described. This program provides graph and digital values with variation of time. Moreover, it includes an alarm system for when the oil condition is bad.

엔진오일 상태에 대한 프로브의 이론 특성 (Theoretical Characteristics of the Probe with Respect to the Engine Oil States)

  • 김영주
    • 한국해양환경ㆍ에너지학회지
    • /
    • 제15권1호
    • /
    • pp.22-24
    • /
    • 2012
  • 엔진오일 상태에 따라서 엔진 오일의 유전율이 변화하게 된다. 오일의 유전율은 프로브의 특성 임피던스와 관계가 있으며, 프로브의 특성 임피던스는 프로브 입력단의 반사 신호를 결정한다. 본 논문에서는 프로브의 등가회로를 유도하고 정전용량 측정에 의해서 구한 유전율의 변화에 따른 프로브의 반사 계수를 이론적으로 계산 하였다. 결과로 오일의 상태가 열화 되면 반사 계수가 증가 되는 것을 알 수 있다.

오일필터 일체형 엔진오일 퇴화감지센서용 센싱시스템 개발 (Development of Sensing System for an Engine Oil Deterioration Detection Sensor Integrated with an Oil Filter)

  • 전상명
    • 센서학회지
    • /
    • 제20권4호
    • /
    • pp.243-248
    • /
    • 2011
  • The purpose of this study is to develop a sensing system to measure the capacitance of a pre-developed engine oil deterioration detection sensor integrated with an oil filter. To measure the capacitance of engine oil in the sensor, it is used the way measuring the electric charging time in a capacitor by impressing DC volt. This method has merits on cost and signal stability. The measured capacitance is compensated by comparison with the one measured by an impedance analyzer. Also, using the dielectric constant gained by an impedance analyzer, the calculating equation of the dielectric constant of engine oil related with the currently developed sensor is decided. Finally, the degradation degree of engine oil is estimated according to the change rate of dielectric constant between green oil and used oil. The newly developed personal controller is to control a series of the processes.