• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.12
• /
• pp.1133-1139
• /
• 2014

This paper proposes a simple method to improve a sensitivity of a straightness measurement system for a linear stage, which is applied to a system based on a geometric optic method. An optical system for this method is composed of a corner-cube retro-reflector, a ball-lens and a twodimensional position sensitive detector (2D PSD). The effectiveness of the proposed method was examined theoretically, and verified experimentally using a prototype measurement system. The results show that the measuring sensitivity was dependent on the size of the ball-lens and the setup position of PSD from the ball-lens, and that the proposed method is efficient method to improve the measuring sensitivity.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.81-84
• /
• 2001

This paper presents a potable bio-signal measurement system using Bluetooth for the 24-hours continuous health state monitoring of the elderly and the disabled. The measurement system has the functions of acquisition of various bio-signals, wireless data transmission and adjustment of parameters such as gain and cut-off frequency. This measurement system is designed according to the international specifications of the recommendation of AAMI (Association for the Advancement of Medical Instrumentation). The design targets of the developing system about volume and power consumption are 20x30x5mm$^3$ and 8mW.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.151-156
• /
• 1997

A laser measurement system, a modified Michelson interferometer, which can accurately measure high speed length and displacement of servomechanisms by detecting a phase shift in the measurement beam using an optical interference was developed. A frequency stabilized laser source and a 20 fold frequency interpolation and digitizing circuit were applied to the system. The refra- ctive index of the ambient air was calibrated through the Edlens formula. The system achieved a resolution of /40, 16nm, a maximum allow-able measurement speed of 600nm/sec, and a length measure- ment range of 1500 mm. Performance of the system was evaluated on the machining center in short and long length measurements.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.381-386
• /
• 1994

Recently, the design and construction of massive concrete structures are increased. But, the temperature rise within a large concrete mass make the construction of massive concrete structures be very difficult. Therefore, in Seohae Grand Bridge Project, the field measurement of hydration heat for the massive concrete footings(11$\times$22$\times$4m) was carried out. It was shown to be possible to construct the massive concrete footing successfully by application of pipe cooling system. And the measurement results showed that standard code for concrete practice was very conservative.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1235-1239
• /
• 2003

On the base of network frame and protocol system of Ethernet the networked sensing technology based on Ethernet is studied and the design principles of industrial Ethernet measurement of control system is put forward, and the general structure model is built in the paper. An eight-bit economical MCU scheme is proposed, and a general scheme of distributed intelligent networked measuring and control equipment based on TCP/IP is designed too. A compact TCP/IP protocol stack are successfully implemented in eight-bit MCU. With C51 program language, method of modularized programming is applied in soft design. The problem of in-system modifying measuring and control strategy of its system is solved successfully by assigning memory dynamically and saving parameter with EEPROM, and it makes the intelligent networked measurement and control system can explain and analyses control strategy from PC. Experiment result shows that, the research of intelligent networked measurement and control equipment and system base on TCP/IP is successful, with flexible network, convenient usage, and good commonality.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.504-516
• /
• 2017

The Jordan Research and Training Reactor (JRTR) is the first research reactor in Jordan, the commissioning of which is ongoing. The reactor is a 5-MWth, open-pool type, light-water-moderated, and cooled reactor with a heavy water reflector system. The neutron measurement system (NMS) applied to the JRTR employs a wide-range fission chamber that can cover from source range to power range. A high-sensitivity boron trifluoride counter was added to obtain more accurate measurements of the neutron signals and to calibrate the log power signals; the NMS has a major role in the entire commissioning stage. However, few case studies exist concerning the application of the NMS to a research reactor. This study introduces the features of the NMS and the boron trifluoride counter in the JRTR and shares valuable experiences from lessons learned from the system installation to its early commissioning. In particular, the background noise relative to the signal-to-noise ratio and the NMS signal interlock are elaborated. The results of the count rates with the neutron source and the effects of the discriminator threshold are summarized.

• Fashion & Textile Research Journal
• /
• v.7 no.2
• /
• pp.187-195
• /
• 2005

The purposes of this study were to investigate the effects of the elements of textile design on consumer emotion and to develop the emotion model which is suitable for the textile design. The descriptive system of textile design was developed based on the previous studies. Emotion measurement scale was developed to analyze the consumer emotion for the textile design. 20 representative types of textile design were collected as stimuli set for this study, consumer emotion on each design type was examined and was analyzed through the survey. For the data analysis, principal component analysis was employed. As a result, 8 emotional factors such as 'Modern', 'Fun', 'Natural', 'Elegance', 'Classic', 'Ethnic', 'Wild' and 'Sporty' were derived from the results of the survey. Emotion measurement scale which consisted of 8 factors was developed to analyze the effects of the elements of textile design on consumer emotion and 80 representative types of textile design were collected. In addition, the emotion which consumers feel for the textile design types was investigated and each textile design was described according to the descriptive system of textile design. Statistical methods of pearson correlation and multiple regression were employed to analyze the relationship between the elements of textile design and consumer emotion. The results of this study revealed that 15 design elements which affected consumer emotion were the size of motives, the shape of motives, the degree of tone contrast among motives etc. This study findings can provide specific design methods for the effectiveness of consumer emotion.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.1
• /
• pp.8-19
• /
• 2003

Special purpose vessels such as drillship and ocean research vessels install the DPS(Dynamic Positioning System) to maintain the position and heading for long-time operation. This paper deals with the design parameters for the control theory and filter algorithms of DP system. for the environmental loadings wind forces, current forces and wave forces were considered. In order to estimate the low frequency motions without first-order wave motion, the Kalman filter was used and it was assumed that the first-order wave forces correspond to system noises and first-order wave motions are measurement noises. In this simulation, the length of research vessel is 65 meters and it has four thrusters to maintain the position. The ability of keeping position and heading was confirmed. For the calculation of thruster input the LQR and LOI control theory were adopted and the effects of gain were investigated.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.369-371
• /
• 2007

Due to the measurement noise or system noise, the performance of photovoltaic power generation system can be degraded. If this noise is contained in the solar array voltage measurement signal, the correct operation of the maximum power point tracker can not be guaranteed. The application of the extended Kalman filter to the photovoltaic system can obtain enhanced states estimation result. The Kalman filter provides a recursive solution to optimally estimate from random noise signals. Additionally, as a consequence of Kalman filter, the unmeasurable state such as inductor current can be estimated without current sensor. The methods for system modeling and extended Kalman filter design are presented and the experimental results verify the validity of the proposed system.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.