• Journal of Wind Energy
• /
• v.4 no.1
• /
• pp.20-29
• /
• 2013

Load measurement, which is performed based on IEC 61400-13, consists of three stages: the stage of collecting huge amounts of load measurement data through a measurement campaign lasting for several months; the stage of processing the measured data, including data validation and classification; and the stage of analyzing the processed data through time series analysis, load statistics analysis, frequency analysis, load spectrum analysis, and equivalent load analysis. In this research, we pursued the development of an analysis software in MATLAB to save labor and to secure exact and consistent performance evaluation data in processing and analyzing load measurement data. The completed analysis software also includes the functions of processing and analyzing power performance measurement data in accordance with IEC 61400-12. The analysis software was effectively applied to process and analyse the load measurement data from a demonstration research for a 750 kW direct-drive wind turbine generator system (KBP-750D), performed at the Daegwanryeong Wind Turbine Demonstration Complex. This paper describes the details of the analysis software and its processing and analysis stages for load measurement data and presents the analysis results.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03c
• /
• pp.37-54
• /
• 2000

The observational method using field measurement technique have contributed significantly to advancements in the state-of-the art of geotechnical engineering in the 20th century. Due to the rapid development in computer technology, Internet and GIS have become an integral part of civil engineering project management. This paper presents new technologies and development in observational method which have valuable implication on field measurement in geotechnical engineering. Systematic approach to planning monitoring program in geotechnical instrumentation is also presented. Finally, research needs in development and application of integrated design/construction management system in geotechnical engineering projects are discussed.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.241-248
• /
• 2010

A bimodal low-floor tram can provide the punctuality of trains and the flexibility of bus together to the passengers. Its propulsion system is a series hybrid type using a set of CNG engine generator and Li-polymer battery. This paper presents a development of the measurement equipment for fine-tuning of a series hybrid propulsion system of bimodal low-floor tram. Its configuration schemes are described and certified using the measurement data of bimodal low-floor tram.

• Smart Media Journal
• /
• v.11 no.1
• /
• pp.9-16
• /
• 2022

With the development of online commercializing technology and the growth of online market, it has become extremely important for companies that aim to commercialize their products and services to control time and resources. Even when a single company has control over the entire process, it is necessary to maintain the efficiency among the process of development. In particular, when there is a lot of cooperation throughout the course of development, requiring many parties to communicate with each other, the issue of declining efficiency becomes much clearer. The timing of when to launch a product or service has become just as important as completing and testing them for companies. Companies have developed new tools to prevent situations that may lead to inefficiency in the development process, including an increase in the amount of resource used or issues with security maintenance. However, there is a lack of proper measurement tool that assesses what kind of additional benefits the entire process of the company is bringing, or whether or not the processes need to be improved in certain areas. Thus, this study aims to suggest a method to measure efficiency, to provide an empirical efficiency measurement method for the development process of online content.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.916-919
• /
• 2003

In this paper, we deal with a development of measurement system to apply the leakage rates test of primary containment in nuclear power plant. The measurement test about leakage rates in primary containment is one sort of test to prove safety of nuclear power plant. The parameters which are measured to calculate leakage rates are drybulb temperature, dew point temperature(or relative humidity), absolute pressure and flow. Overall, the measurement system consists of sensor module for data acquisition of the parameters, transfer module for wireless data communication and control module to control system and to calculate leakage rates. Because existing measurement systems are difficult to set in field, we pursued convenience of use, we applied wireless data communication and individual form module using battery. We also changed for the better in confidence. Recently, we are developing a drybulb temperature and a dew point temperature sensor module. We describe about function of developed measurement system, its standard and an plan for verification of measurement system.

• Journal of the Korean Society for Precision Engineering
• /
• v.9 no.1
• /
• pp.82-95
• /
• 1992

There is the high interest for sensing of tool wear with the aim of controlling machine tools productivity from the point of view of qualitity. Difficulties in this measurement are also known. This study is on the development of measurement setup for crater wear by CCD image inturning. In this study, the crater wear measurement system consists of the He-Ne gas laser, diffraction grating. CCD camera, noise filter, slit, microcomputer, diverging lens, converging lens and so on. He-Ne laser beam passes through a diverging lens and a diffraction grating is positioned properly. A converging lens focuses so that the interference fringes can be obtained on the crater wear. Performance test revealed that the developed image technique provides precise, absolute tool-wear quantification and reduces human measurement errors. The results obtained are as follows 1. The digitizing of one image requires less than 2ses. 2. It can give detailed information on crater wear with limited times and errors 3. All parameters required by specification are easily obtained for several points of the cutting edge.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.71-77
• /
• 1996

This paper describes the development of on the machine measuring(OMM) system which can directlry measure the three dimensional machined dimensilnal accuracy using scanning probe in milling machine. Two algolithms, continuous path(CP) measurement using UC program and CAD data assisted point to point(PTP) measurement, were developed regarding specification of scanning probe. The OMM system was contructed to verify the developed system suing the proposed algorithm, and actually measured three kinds of machined TV shadow mask molds. The developed system was evaluated it's repeatability and compared with the current measurement system of CMM(Coording Measuring Machine) in terms of relative accuracy and time reduction and productivity increase.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.6
• /
• pp.8-13
• /
• 2008

At present many research projects on high-speed spindles are being conducted. These projects require a measurement technique which includes heat expansion, vibration and displacement measurement according to angular velocity. This paper presents the development of a measurement system for high-speed spindle displacement. The measurement system is based on $LabView^{(R)}$ and features the following sensors: optical sensor which reacts to the position of a marker on the spindle and enables two Laser Displacement Sensors(LDS). These Laser Displacement Sensors send their data to a DAQ(Data Acquisition Device). It is important that the delay time caused by the response times of the sensors as well as the sampling rate of the DAQ is considered because the spindle revolves at very high speeds.

• Journal of Power System Engineering
• /
• v.14 no.1
• /
• pp.40-46
• /
• 2010

This paper shows the development process for measuring three-dimensional flow velocity components in a web-browser. The system is developed in an embeddable C/C++ interpreter Ch and Ch-CGI toolkit. The interface for the web-based measurement system consists of a set of web HTML files and Ch files for CGI. All of data in web browser are passed to Ch-CGI script to generate the output of new HTML file. PC-Server and PC-Client can submit measurement parameters and receive the text/graphical results each other. PC-Client can control the test equipment by using a parameters that received from PC-Server. It also can pass the test results between the web-based measurement system. In summary, the designed measurement system is evaluated, the outputs shown well on the web browser.

• Journal of the Korea Safety Management & Science
• /
• v.5 no.4
• /
• pp.229-243
• /
• 2003

This paper suggests the process of performance measurement system development for B2B e-Marketplace using BSC (Balanced Scorecard). As the first step, main features and factors affecting performance of e-Business company and especially of B2B e-Marketplaces were derived based on the literatures. For the 2nd step, the nonnative performance measurement model for B2B e-Marketplace was suggested. Especially, the research range that the model covers is restricted to the neutral and systematic sourcing B2B e-Marketplace. And, the performance measurement model was based on BSC, for the BSC is very powerful and sound tool among all the available performance measurement systems. Also, the model was based on the AHP (Analytic Hierarchy Process) to make the model more structured, and to draw weights of performance measures from experts