• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.176-179
• /
• 2003

The mean temperature prediction of strip is very important in hot strip finishing mill because of affecting on product quality and shape. Also, temperature can be used by basic information in other on-line control models with affecting control accuracy in factory. So, FE based on-line temperature model was developed for predicting strip mean temperature accurately in various process conditions and factory environments. There are many variables in affecting strip mean temperature in on-line states of factory. But some problems are occurred in considering all variables for making temperature model because of the bad efficiency of regression or fitting analysis. In this report, we have adopted dimensional analysis for solving these problems. We have many variables with dimensions affecting strip temperature but we are able to make non-dimensional variables less than dimensional variables from the combination of dimensional variables caused by PI-Theorem in fluid mechanics. The developed models are divided by two parts. The one is interstand temperature prediction model. The other is roll gap temperature model.

• Wind and Structures
• /
• 제18권6호
• /
• pp.651-668
• /
• 2014

Wind tunnel tests are conducted to investigate the wind loads on vertical fixed-roof cylindrical tanks with a very low aspect ratio of 0.275, which is a typical ratio for practical tanks with a volume of $100,000m^3$. Both the flat-roof tank and the dome-roof tank are investigated in present study. The first four moments of the measured wind pressure, including the mean and normalized deviation pressure, kurtosis and skewness of the pressure signal, are obtained to study the feature of the wind loads. It is shown that the wind loads are closely related to the behavior of flow around the structure. For either tank, the mean wind pressures on the cylinder are positive on the windward area and negative on the sides and the wake area, and the mean wind pressures on the whole roof are negative. The roof configurations have no considerable influence on the mean pressure distributions of cylindrical wall in general. Highly non-Gaussian feature is found in either tank. Conditional sampling technique, envelope method, and the proper orthogonal decomposition (POD) analysis are employed to investigate the characteristics of wind loads on the cylinder in more detail. It is shown that the patterns of wind pressure obtained from conditional sampling are similar to the mean pressure patterns.An instantaneous pressure coefficient can present a wide range from the maximum value to the minimum value. The quasi-steady assumption is not valid for structures considered in this paper according to the POD analysis.

• Journal of applied mathematics & informatics
• /
• 제35권1_2호
• /
• pp.191-204
• /
• 2017

A new fifth-order weighted Runge-Kutta algorithm based on heronian mean for solving initial value problem in ordinary differential equations is considered in this paper. Comparisons in terms of numerical accuracy and size of the stability region between new proposed Runge-Kutta(5,5) algorithm, Runge-Kutta (5,5) based on Harmonic Mean, Runge-Kutta(5,5) based on Contra Harmonic Mean and Runge-Kutta(5,5) based on Geometric Mean are carried out as well. The problems, methods and comparison criteria are specified very carefully. Numerical experiments show that the new algorithm performs better than other three methods in solving variety of initial value problems. The error analysis is discussed and stability polynomials and regions have also been presented.

• 대한골관절종양학회지
• /
• 제18권2호
• /
• pp.51-58
• /
• 2012

목적: 슬관절 주위에 발생한 골종양 환자에서 종양 대치물을 이용한 재건술의 결과와 보행 분석의 유용성을 알아보고자 하였다. 대상 및 방법: 2001년부터 2010년까지 슬관절 주위에 발생한 골종양에 대하여 광범위 절제술 후 종양 대치물을 이용한 재건술을 시행 받은 30명 중 7명을 대상으로 하였으며 기능적 결과 및 보행 분석 검사를 평가하였다. 결과: SF-36 점수는 신체적, 정신적 역할제한 항목에서 각각 100% (100점)으로 높은 점수를 보였으며 일반 건강상태, 신체적 기능 정도, 활력, 사회적 기능에서 낮은 점수를 나타냈다. 또한 MSTS 평가의 종합 평균 점수는 88.1% (23.8점[17-27])였다. 보행 분석 검사상 평균 보행속도 97.2 m/s, 평균 분속수 105.6 step/min, 평균 활보장 111.3 m, 평균 보장 61.5 cm, 유각기 39.8%cycle, 입각기 60.1%cycle, 평균 단하지 지지기 37.1%cycle, 평균 양하지 지지기 13.0%cycle, 평균 발 들림시기 60.7%cycle였다. 결론: 슬관절 주위 종양에 대한 광범위 절제술 후 종양 대치물을 이용한 재건술은 좋은 기능적결과를 기대할 수 있으며, 보행 분석 검사는 술후 환자의 상태를 정량적으로 평가함으로써 보행 모습 및 기능을 객관화 할 수 있는 한 방법으로 사료되며 기능적 평가 방법과 함께 치료 및 술 후 재활 계획을 세우는데 도움이 되리라 생각된다.

• 한국조사연구학회지:조사연구
• /
• 제7권2호
• /
• pp.53-69
• /
• 2006

표본조사에서 가중치는 설계 단계와 분석 단계에서 만들어지고 부여될 수 있다. 설계 단계의 가중치는 추출확률이나 응답률 등과 같은 표본 데이터 획득 지표에 관련되어 있고 분석 단계의 가중치는 모집단 수치나 다른 보조 변수정보 등과 같은 외적인 정보와 관련되어 있다. 그리고 최종가중치는 설계 단계의 가중치와 분석 단계의 가중치의 곱으로 만들어진다. 이 논문에서는 분석 단계에서 부여되는 가중치에 초점을 맞추어 가중평균으로 모평균을 추정할 때 가중평균에 포함된 가중치가 모평균 추론에 미치는 영향을 고찰하였다. 유한모집단에서 각 조사단위에 조사변수와 가중치가 쌍으로 있고 표본추출확률이 균등한 경우를 가정하였다. 이러한 조건에서 가중평균의 편향과 평균제곱오차를 구하여 가중평균은 모평균의 편향 추정량임을 보였고, 편향의 방향과 크기는 조사변수와 가중치의 상관관계로 설명할 수 있음을 보였다. 즉, 만일 가중치와 조사변수가 양의 상관관계가 있으면 가중평균은 모평균을 과대 추정하게 되고, 만일 음의 상관관계가 있으면 모평균을 과소 추정하게 된다. 그리고 두 변수의 상관계수가 크면 편향은 증가한다. 가중평균에 대한 이론적인 수식 유도와 함께 편향의 크기와 평균제곱오차의 크기를 수치적으로 검토하기 위하여 모의실험을 실시하였다. 모의실험에서는 상관계수가 -0.2과 0.6사이에 있는 9개의 가중치를 생성하였고, 표본수는 100부터 400까지 고려하여 편향의 크기와 평균제곱오차의 크기를 수치적으로 구하였다. 하나의 결과로써 상관계수가 0.55이고 표본수가 400인 경우에 가중평균의 편향의 제곱이 평균제곱오차에서 차지하는 비율은 무려 82%에 이르는 것으로 나타났는데, 이는 가중평균의 편향이 어떤 경우에는 매우 심각할 수도 있음을 보여주는 것이다.

• 대한수학회논문집
• /
• 제11권3호
• /
• pp.841-853
• /
• 1996

This article finds smoothed perturbation analysis estimates for the derivatives of mean performance measures in a Markovian queue with batch arrivals. We show that those estimates can be observed from a single sample path.

• Korean Journal of Radiology
• /
• 제20권4호
• /
• pp.599-608
• /
• 2019

Objective: To evaluate the effectiveness of computed tomography (CT) Hounsfield unit histogram analysis (HUHA) in postoperative pancreatic fistula (PF) prediction. Materials and Methods: Fifty-four patients (33 males and 21 females; mean age, 65.6 years; age range, 37-89 years) who had undergone preoperative CT and pancreaticoduodenectomy were included in this retrospective study. Two radiologists measured mean CT Hounsfield unit (CTHU) values by drawing regions of interest (ROIs) at the level of the pancreaticojejunostomy site on preoperative pre-contrast images. The HUHA values were arbitrarily divided into three categories, comprising HUHA-A ≤ 0 HU, 0 HU < HUHA-B < 30 HU, and HUHA-C ≥ 30 HU. Each HUHA value within the ROI was calculated as a percentage of the entire area using commercial 3-dimensional analysis software. Pancreas texture was evaluated as soft or hard by manual palpation. Results: Fifteen patients (27.8%) had clinically relevant PFs. The PF group had significantly higher HUHA-A (p < 0.01) and significantly lower mean CTHU (p < 0.01) values than those of the non-PF group. The HUHA-A value had a moderately strong correlation with PF occurrence (r = 0.60, p < 0.01), whereas the mean CTHU had a weak negative correlation with PF occurrence (r = -0.27, p < 0.01). The HUHA-A and mean CTHU areas under the curve (AUCs) for predicting PF occurrence were 0.86 and 0.65, respectively, with significant difference (p < 0.01). The HUHA-A and mean CTHU AUCs for predicting pancreatic softness were 0.86 and 0.64, respectively, with significant difference (p < 0.01). Conclusion: The HUHA-A values on preoperative pre-contrast CT images demonstrate a strong correlation with PF occurrence.

• Computers and Concrete
• /
• 제30권4호
• /
• pp.237-242
• /
• 2022

This paper is concerned with exponential stability in mean square for stochastic static neutral neural networks with varying delays. By using Lyapunov functional method and with the help of stochastic analysis technique, the sufficient conditions to guarantee the exponential stability in mean square for the neural networks are obtained and some results of related literature are extended.

• Nonlinear Functional Analysis and Applications
• /
• 제27권3호
• /
• pp.621-640
• /
• 2022

The aim of this study is to establish some mean convergence theorems for double array of fuzzy random variables in metric space endowed with a convex combination operation under various assumptions.

• Journal of Acupuncture Research
• /
• 제21권1호
• /
• pp.176-188
• /
• 2004

This study was carried out to investigate statistical validity of medical articles that used various statistical techniques such as t-test, analysis of variance, correlation analysis, regression analysis and chi-square test. For study 429 original articles using those statistical methods were selected from Journal of Korean Acupuncture & Moxibusition Society published from 1984 to 2002. 429 original articles were reviewed to analyzed the statistical procedures. Results are summarized as follows : 1. In this study 93 articles(21.68%) of 429 ones didn't report statement of statistical method in detail. 2. 53 articles(12.53%) didn't report p-value in correctly, and 245 articles(57.11 %) used mean${\pm}$standard error (Mean${\pm}$SEM.) and 109 articles used mean${\pm}$standard deviation(Mean${\pm}$SD.). All of 23 articles using nonparametric statistical techniques made an error to central tendency or dispersion. 3. 175 articles(59.93%) and 14 articles(4.79%) of 292 ones made an error to description of equal variances and normal distribution. 4. 99 articles(50%) of 185 ones misused t-test and 4 articles of 5 ones misused chi-square test. 5. 28 articles(73.68%) of 38 ones using discrete variable misused parametric technique such as t-test or ANOVA. 2 articles and 1 article of 125 ones choosing paired samples misused independent t-test and Mann-Whitney U test. 6. 20 articles using analysis of variance didn't use multiple comparison.