• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 춘계학술논문 발표대회
• /
• pp.147-150
• /
• 2007

As recent buildings often use low-quality concrete materials, are constructed defectively, and are put in extreme environmental conditions, many of them show the shortening of life resulting from the corrosion of reinforcing rods by salt damage, carbonization, freezing and thawing, cracking. This in turn raises the cost of repair and maintenance, so it is required to extend the life of structures through enhancing the durability of concrete. In response to the demand, researches on high-durability concrete are being made actively focused on the maximum water-cement ratio, the maximum unit quantity, the minimum cover thickness, the addition of mineral admixtures, etc. With this background, the present study examined the basic physical properties of concrete containing admixtures for enhancing the durability of concrete.

• 해양환경안전학회지
• /
• 제2권1호
• /
• pp.67-75
• /
• 1996

An innovative batch electrolytic system consisted of electrolytic basin, which was equipped with DSA(Dimensionally Stable Anode) type insoluble electrode, Ti/IrO2 anode and H-C metal cathode, and flotation separator was developed for the efficient treatment of shipboard emulsified oily wastewater. The electorod cleance and current density of elecrolytic basin to ensure maximum treatment efficiency of oily wastewater was evaluated as 6 mm, 3 A/dm3, respectively. The electrolytic efficiency of oily wastewater was affected by the operationtemperature, and it means that the temperature controller to ensure the stabiity of the process is required. The conductivity in the electrolytic basin was increased with the percentage of sea water in the oily wastewater, and over 90% of treatment efficiency of oily wastewater could be obtained at 7% of sea water. The oil removal rate was increased according to the increase of the quantity of electricity, and the maximum value of electrilyic rate constant was 288 mgoil/A.min. The information obtained from this study might be used for development of an efficient continuous electrolytic system treating the emulsified oily wastewater.

• 태양에너지
• /
• 제18권4호
• /
• pp.67-75
• /
• 1998

Daylight illuminance are always changing. Nevertheless, when the energy savings due to daylight are calculated an accurate estimate of daylight availability is required. Where artificial lighting is photoelectrically controlled the relevant quantity is the cumulative distribution of daylight illuminance. This paper describes an experiment which measured daylight illuminance over one whole working year. Also using measured data on availability of daylight, equations are drived to predict the maximum possible savings from photoelectric controls for an interior lighting installation. The equations are applied to a space as a worked example and figures are given for the relative maximum savings in artificial lighting use of three control systems: on/off, dimming and mixed.

• 대한전기학회논문지
• /
• 제34권3호
• /
• pp.107-114
• /
• 1985

This paper presents the iterative algorithm for obtaining the ME PSE(Maximum Entropy Power Spectral Estimation) of 2-dimensional signals. This problem involves a correction matching power spectral estimate that can be represented as the reciprocal of the spectral of 2-dimensional signals. This requires two matrix inversion every iterations. Thus, we compensate the matrix to be constantly positive definite with relaxational parameters. Using Row/Column decomposition Discrete Fourier Transform, we can decrease a calculation quantity. Using Lincoln data and white noise, this paper examines ME PSE algorithms. Finally, the results output at the graphic display device. The 2-dimensional data have the 3-dimensional axis components, and, this paper develops 3-dimensional graphic output algorithms using 2-dimensional DGL(Device Independent Graphic Library) which is prepared for HP-1000 F-series computer.

• 한국잠사곤충학회지
• /
• 제14권1호
• /
• pp.9-13
• /
• 1972

상족후 7일째 수견하고 자웅을 감별하여 일부는 방사선(${\gamma}$-선) 1,000${\gamma}$에서 40분간 조사시켜 화아 교미후 산란후 시간을 5분, 15분, 45분, 90분, 720분, 2,400분의 6구로 나누어 란내 acid soluble phosphorus의 변동을 분석 검토한 결과 다음과 같은 결과를 얻었다. 1. 표준구(대조구)에서는 산란후 90분에 1,288${\gamma}$/100 mg D.P.로 점차 감소하여 720분에 1,232${\gamma}$/100mg D.P.로 가장 적은량을 나타냈으나 2,400분에 1,456${\gamma}$/100mg D.P.로 가장 많은 량을 나타냄을 알 수 있었다. 2. 방사선처리한 ♀에 표준구(무처리) ♂놈을 교미시킨 구에서는 표준구(대조구)에 비하여 산란초기 5분에 1,288${\gamma}$/100mg D.P. 15분에 1,299${\gamma}$/100mg D.P.로 다소 적은량을 나타냈으나 45분에 1,484${\gamma}$/100mg D.P.로 증가된 량을 보이다가 2,400분에 1,400${\gamma}$/100mg D.P.로 표준구(대조구)보다 적은량을 나타냈다. 그러나 표준구에 ♀놈에 방사선처리구에 ♂놈을 교미시킨 구와 비교할 때 초기에는 다소 적은 량이었으나 큰 차리는 확인할 수 없었으며 양구 다같이 산란후 15분에서 720분까지 양적으로 표준구(대조구) 많았음을 인정할 수 있고, 방사선처리한 ♀놈에 표준구(무처리)의 ♂놈을 교미시킨 구보다 표준구의 ♀놈에 방사선처리한 ♂놈을 교미시킨 구에서 변동이 크고, lipid phosphorus(Part I)의 경우와 상반된 변동이 이루어지는것을 알 수 있었다. 3. ♀.♂ 다같이 방사선을 처리하여 교미시킨 구에서 산란후 90분에 1,736${\gamma}$/100mg D.P, 2,400분에 1,760 ${\gamma}$/100mg D.P.로 많은 량을 나타냈고 5분에 1,288${\gamma}$/100mg D.P.로 가장 적은량을 나타냈으며 전반적으로 보아 산란초기에는 표준구보다 적었으나 그 후에는 표준구보다 크게 증가하고 변동이 심한것을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제19권2호
• /
• pp.50-56
• /
• 2011

To meet the NOx limit without a penalty of fuel consumption, Urea-SCR system is currently regarded as promising NOx reduction technology for diesel engines. SCR system has to achieve maximal NOx conversion in combination with minimal $NH_3$ slip. In this study, map based open loop control for urea injection was developed and assessed in the European Transient Cycle (ETC) for heavy duty diesel engine. The basic urea quantity set-value which was calculated using the look up tables of engine out NOx, exhaust flow rate and optimum NSR resulted in NOx reduction of 80% and the average $NH_3$ slip of 24 ppm and maximum of 79 ppm. In order to reduce $NH_3$ slip, $NH_3$ storage control algorithm was applied to correct the basic urea quantity and reduced $NH_3$ slip levels to the average 15 ppm and maximum 49 ppm while keeping NOx reduction of 76%. With high and increasing SCR temperature, the $NH_3$ storage capacity decreases, which leads to $NH_3$ slip. The resulting $NH_3$ slip peak can be avoided by stopping or significantly reducing the urea injection during the SCR temperature gradient is over $30^{\circ}C/min$.

• KIEAE Journal
• /
• 제10권5호
• /
• pp.115-121
• /
• 2010

Lime was the solidifier mostly used at the fields of construction and civil works in the past. however, the development of Portland cement remarkably reduced the use of it. Recently as the concernment on circumstances gets higher, lime wined attention again as an eco-friendly material and was used at earth-using construction. This study examined the physical and chemical capacity of lime complexes with lime capacity improved, and performed fundamental study on the way to concretize by mixing it with earth. As a result, lime complex pressure strength was lower than cement pressure strength but it showed the possibility that its strength was improved by W/B control. The measurement of XRD after paste formation confirmed a compound generated by the reaction of Ca2+ion and Si, Al, and Fe from pozzolan reaction. A earth wall experiment by using lime complexes and earth showed that the higher, WB or the lower the quantity of unit combined materials, the lower the pressure strength was. The maximum pressure strength was maximum 11MPa when the quantity of unit combined materials was 450. It is because the composed earth particles had a high content of micro powder less than silt, so a lot of combination are demanded to secure fluidity. As a result of peptization experiment, after hardening, the material was not dissolved, which informed of the possibility of use as an outer subsidiary material. If the material is hardened by mold formation method, natural hardening crack appears. Cast expresses smart surface quality and enables to design for multiple purpose. The result shows the possibility of construction of low-story structures by using earth wall made of lime complexes and earth.

• 생물환경조절학회지
• /
• 제18권3호
• /
• pp.177-184
• /
• 2009

본 연구는 온실 운영에 필요한 전력량을 확보함으로서 온실경영비 절감을 목적으로 우선 태양광발전시스템을 온실의 인접한 건물의 옥상에 설치하여 기상상태에 따른 발전량을 실험적으로 검토하였다. 연구결과를 요약하면 다음과 같다. 실험기간 동안 최고, 평균 및 최저온도는 각각 $0.4{\sim}34.1,\;-6.1{\sim}22.2$ 및 $-14.1{\sim}16.7^{\circ}C$ 정도의 범위에 있었다. 그리고 일사량의 경우, 최대, 평균 및 최저값은 각각 $28.8MJ{\cdot}m^{-2}$, $14.9MJ{\cdot}m^{-2}$ 및 $0.6MJ{\cdot}m^{-2}$ 정도였고, 전력은 일사량에 비례해서 증가하지 않고 약 750W 전후에서 거의 일정한 것을 알 수 있었다. 일일 최대, 평균 및 최소 소비전력량은 각각 약 5.2kWh, 2.5kWh및 0kWh정도였다. 본 실험에 사용된 시스템의 평균 소비전력량을 기준으로 보면, 온풍기의 용량 및 작동시간이 작은 경우는 충분하지만 큰 경우는 부족한 것으로 나타났다. 온풍기의 용량이 큰 경우, 어레이 면적이 현재의 약 3배인 약 $21m^2$ 정도이면 평균 전력량으로 충분할 것으로 판단되었다. 물론 어레이의 온도가 높아지는 한 여름철에는 일사량에 비례해서 발생 전력이 증가하지 않은 것으로 나타났지만, 현재까지 실험결과로 보면, 두 인자간에 상관계수가 0.84 정도로 상관관계가 높은 것으로 나타났다.

• 디지털융복합연구
• /
• 제16권11호
• /
• pp.335-340
• /
• 2018

정확한 인식률을 보이고 있는 상업적인 음성인식 시스템은 화자종속 고립데이터로부터 학습 모델을 사용한다. 그러나 잡음 환경에서 데이터양에 따라 음성인식의 성능이 저하되는 문제점이 있다. 본 논문에서는 가우시안 분포에서 Maximum Log Likelihood를 이용한 벡터 양자화 기반 음성 인식 성능 향상을 제안한다. 제안하는 방법은 음성에 대한 특징을 가지고 벡터 양자화와 Maximum Log Likelihood 음성 특징 추출 방법을 이용하여 유사 음성에 대한 음성 인식의 정확성을 높이는 최적 학습 모델 구성 방법이다. 이를 위해 HMM을 기반으로 음성 특징을 추출하는 방법을 사용한다. 제안하는 방법을 사용하여 기존 시스템에서 생성되어 사용되는 음성 모델에 대한 부정확한 음성 모델에 대한 정확성을 향상시킬 수 있으므로 음성 인식에 강인한 모델을 구성할 수 있다. 제안하는 방법은 음성 인식 시스템에서 향상된 인식의 정확도를 보인다.

• 전기의세계
• /
• 제18권6호
• /
• pp.9-22
• /
• 1969

This thesis has suggested a method of applying the Maximum Principle of Pontryagin to the optimal control of distributive electrical networks. In general, electrical networks consist of branches, nodes, sources and loads. The effective values of steady state currents and voltages are independent of time but only expressed as the functions of position. Moreover, most of the node voltages and branch currents are not predetermined, that is, initially unknown, and their inherent loop characteristics satisfy only Kirchhoff's current and voltage laws. The Maximum Principle, however, needs the initial fixed values of all state variables for its standand way of application. In spite of this inconsistency this thesis has undertaken to suggest a new approach to the successful solution of the above mentioned networks by introducing scaling factors and a state variable change technique which transform the boundary-value unknown problem into the boundary-value partially fixed and partially free problem. For the examples of applying the method suggested, the control problems for minimizing copper quantity in a distribution line have been solved with voltage drop constraint imposed on. In the case of uniform load distribution it has been shown that the optimal wire diameter of the distribution line is reciprocally proportional to the root of distance. For the same load pattern as above the wire diameter giving the minimum copper loss in the distribution line has been shown to be reciprocally proportional to distance.