• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.26 no.2
• /
• pp.197-203
• /
• 2000

Maxillary defect may be induced by trauma, inflammation, cyst, tumor and surgical procedure. In case of limited wall defect, free bone graft has been preferred. But it has some problems such as postoperative bone resorption and soft tissue inclusion to recipient site. And we can not use free bone in the case who has inflammation in the donor site. So we used the micro-titanium mesh as reconstructive material for the maxillary wall defect. We had operated 8 patients who were diagnosed as maxillary partial defects from June 1997 to September 1998 in the Chin-Hae military hospital. They were 1 case of antral wall defect, 1 case of palatal wall defect, 5 cases of infra-orbital wall defects and 1 case of oroantral fistula case. As a result, the micro-titanium mesh has shown the morphological stability and biocompatibility and it could be used in case who has infection. And mesh structure could prevent soft tissue ingrowth to bony defect area. Thus it can be used to the case of maxillary partial defect successfully.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.2
• /
• pp.228-239
• /
• 2007

Statement of problem: Following tooth loss, the edentulous alveolar process of maxilla is affected by irreversible reabsorption process, with progressive sinus pneumatization leads to leaving inadquate bone height for placement of endosseous implants. Grafting the floor of maxillary sinus by sinus lifting surgery and augmentation of autologous bone or alternative bone material is a method of attaining sufficient bone height for maxillary implants placement and has proven to be a highty successful. Purpose: This study was undertaken to clarify the morphometric characteristics of inferior maxillary sinus and alveolar process for installation of implants. Material and method: Nineteen skulls (37 sinuses, 10M / 9F) obtained from the collection of the department of anatomy and cell biology of Hanyang medical school were studied. The mean age of the deceased was 69.9 years (range 44 to 88 years). The distance between alveolar border and inferior sinus margin at each tooth, the height of alveolar process and the thickness of cortical bone of the outer and inner table of alveolar process and the inferior wall of maxillary sinus were measured. Results and Conclusion: 1. The septum of inferior maxillary sinus were observe 28 sides (76.%) and located at the third molar (52.6%) and the second molar (26.3%). The deepest points of inferior border of maxillary sinus were located the first or second molar. The distance between alveolar margin and the deepest point of inferior maxillary sinus is $9.7{\pm}4.9mm$. 2. The length of the outer table of alveolar process were $4.9\sim28.2mm$ and the shortest point was between the first and the second molors. The thickness of them were $0.9\sim3.2mm$. The length of the inner table of alveolar process were $7.4\sim25.8mm$ and the shortest point was between the first and the second molars. The thickness of the were $0.9\sim4.6mm$. The results of this study are useful anatomical data for installing of maxillary implants.

• The korean journal of orthodontics
• /
• v.11 no.1
• /
• pp.7-15
• /
• 1981

Tooth movement by orthodontic force is based upon alveolar bone resorption at compression site and bone formation at tension site of tooth. The function of cyclic AMP is to participate not only in initial action of bone cells by mechanical forces but also in the continuous cellular response leading to bone remodeling. This experiment was performed to clarify the role of cyclic AMP in bone remodeling by mechanical forces. The orthodontic forces of about 80 gm and 100 gm were applied to the right canines of maxillary and mandibular bone, respectively, in cats, treated for periods of time ranging from one hour to 28 days. Alveolar bones were obtained from compression and tension sites surrounding tipping maxillary and mandibular canines as well as from contralateral control sites. The samples were extracted, boiled and homogenized, and the supernatants were assayed for cyclic AMP by a radioimmunoassay method. The results were as follows: 1. The orthodontic movement of canines was increased to the end of experimental period and the action of orthodontic forces on tooth movement was more effective in maxillary canine. 2. The cyclic AMP levels of alveolar bones in compression and tension sites initially decreased, then increased and remained elevated to the end of experiment. The differences of the cyclic AMP levels between treated sites and non-treated sites were gradually increased. 3. The cyclic AMP levels in treated sites of mandibular alveolar bone was higher than that of maxillary alveolar bone.

• Journal of Periodontal and Implant Science
• /
• v.41 no.2
• /
• pp.60-66
• /
• 2011

Purpose: The aim of this study is to evaluate the buccal and lingual bone thickness in the anterior teeth and the relationship between bone thickness and the tissue biotype. Methods: Three male and two female human cadaver heads (mean age, 55.4 years) were used in this study. First, the biotype of periodontium was evaluated and categorized into a thick or a thin group. Next, full thickness reflections of the mandible and the maxilla to expose the underlying bone for accurate measurements in the anterior regions were performed. After the removal of the half of the alveolar bone, the probe with a stopper was used to measure the thickness of bone plate at the alveolar crest (AC), 3 mm apical to the alveolar crest (AC-3), 6 mm apical to the alveolar crest (AC-6), and 9 mm apical to the alveolar crest (AC-9). The thickness of the buccal plates at the alveolar crest were $0.97{\pm}0.18\;mm$,$0.78{\pm}0.21\;mm$, and $0.95{\pm}0.35\;mm$ in the maxillary central incisors, lateral incisors, and canines, respectively. The thickness of the labial plates at the alveolar crest were $0.86{\pm}0.59\;mm$, $0.88{\pm}0.70\;mm$, and $1.17{\pm}0.70\;mm$ in the mandibular central incisors, lateral incisors and canines, respectively. Conclusions: The thickness of the labial plate in the maxillary anteriors is very thin that great caution is needed for placing an implant. The present study showed the bone thickness of maxillary and mandibular anteriors at different positions. Therefore, these data can be useful for the understanding of the bone thickness of the anteriors and a successful implant placement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.1
• /
• pp.39-42
• /
• 2010

Maxillary sinus lift and bone graft are used to reconstruct atrophic maxilla molar area for endosseous dental implants. Many different grafting materials and techniques can be used for maxillary sinus bone graft. Bio-$Oss^{(R)}$ has been proposed as bone substitute and successfully utilized as osteoconductive filler. Platelet rich plasma (PRP) is an autologous material with many growth factors, such as PDGF, TGF-$\beta$, IGF, VEGF, facilitating bone healing process. And Platelet poor plasma (PPP) is the by-product in procedure of producing PRP. Six rabbits were used as experimental animal. Both maxillary sinus were grafted with Bio-$Oss^{(R)}$ and PRP, and Bio-$Oss^{(R)}$ and PPP. Rabbits were sacrificed at 4, 8 and 12 weeks. The grafting sites were evaluated by histomorphometric analysis. As a result, using PRP showed excellent bone formation in the early stage, but no further significant effect after that. In late stage, the ability of bone formation of using PRP was even worse than using PPP. The further studies need to be considered in this case.

• Imaging Science in Dentistry
• /
• v.50 no.1
• /
• pp.9-14
• /
• 2020

Purpose: The purpose of this study was to evaluate vertical bone loss and alveolar bone thickness in the maxillary and mandibular incisors of patients with skeletal class III malocclusion. This study also aimed to evaluate the periodontal condition of class III malocclusion patients who had not undergone orthodontic treatment. Materials and Methods: The sample included cone-beam computed tomography scans of 24 Korean subjects (3 male and 21 female). Alveolar bone thickness (ABT), alveolar bone area (ABA), alveolar bone loss (ABL), and fenestration of the maxillary and mandibular incisors were measured using 3-dimensional imaging software. Results: All incisors displayed an ABT of less than 1.0 mm from the labial surface to root level 7 (70% of the root length). A statistically significant difference was observed between the mandibular labial and lingual ABAs and between the maxillary labial and mandibular labial ABAs. The lingual ABA of the mandibular lateral incisors was larger than that of the mandibular central incisors. ABL was severe on the labial surface. A statistically significant difference was observed between the maxillary and mandibular labial ABL values(21.8% and 34.4%, respectively). Mandibular lingual ABL (27.6%) was significantly more severe than maxillary lingual ABL (18.3%) (P<0.05). Eighty-two fenestrations were found on the labial surfaces of the incisors, while only 2 fenestrations were observed on the lingual surfaces. Fenestrations were most commonly observed at root level 6. Conclusion: Careful evaluation is needed before orthodontic treatment to avoid iatrogenic damage of periodontal support when treating patients with class III malocclusion.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.47 no.1
• /
• pp.34-39
• /
• 2021

Objectives: The purpose of the study was to assess the occurrence, location, and dimensions of the intraosseous vascular canal in the lateral wall of the maxillary antrum using cone-beam computed tomography (CBCT). Materials and Methods: In this retrospective study, we examined 400 CBCT scans from our archive of patients who had earlier reported to a dental teaching hospital in the United Arab Emirates. The prevalence, location, and dimensions of the lateral antral intraosseous canal (LAIC) in the maxillary antrum were evaluated by 2 examiners using standardised methods. A third examiner was consulted in cases of disagreement. Results: The prevalence of LAIC was 62.3% (249 maxillary antra) among the study population. The mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC in the posterior maxillary region was 19.83±3.12 mm. There was a significant difference (P=0.05) between the maxillary molar and premolar regions in mean distance from the most inferior point of the alveolar bone and the inferior border of the LAIC. There was no statistically significant difference in mean distance between the most inferior point of the alveolar bone and the inferior border of the LAIC between dentulous and edentulous areas (P=0.1). The G3-intrasinusal type canal less than 1mm in diameter was the most common type of LAIC. Conclusion: This study established the approximate location of the LAIC in a United Arab Emirates cohort, which will assist the oral surgeon in selecting the appropriate site for sinus lift procedures with reduced risk of surgical hemorrhage.

• The Journal of the Korean dental association
• /
• v.47 no.3
• /
• pp.122-130
• /
• 2009

For the successful guided bone regeneration(GBR) of maxillary bony defect, proper soft tissue coverage is one of the most important things. Soft tissue dehiscence can be most common reason of osseous reconstruction failure. If a vascular supply to the graft should not develop from the host tissue, then the graft may also foil. Both of these prerequisites can be aided by judicious use of the buccal fat pad(BFP). Many methods for adequate soft tissue coverage have been proposed and the use of the BFP is one of them. BFP is useful in posterior maxillary area, can cover larger area and have higher blood flow than other methods. so the use of the BFP may offer protection and early blood supply to maxillary bone graft. This report describes the history, anatomy, blood flow, and clinical usefulness with two clinical cases.

• International Journal of Oral Biology
• /
• v.46 no.4
• /
• pp.200-207
• /
• 2021

In case of gingival recession and alveolar bone defects due to tooth loss for a long period of time in a single tooth in the maxillary anterior region, it is not easy to obtain aesthetic results with a single implant prosthesis. For aesthetic restoration, it is important to preserve hard and soft tissues through alveolar bone augmentation as well as restore harmony with adjacent teeth and soft tissues by placing the implant in an ideal location. In this case, an implant was placed using guided bone regeneration and a connective tissue graft simultaneously with immediate implantation after extraction from the maxillary anterior region where only residual root was left for a long period of time.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.6
• /
• pp.387-395
• /
• 2020

Background: The anterior-middle superior alveolar (AMSA) anesthetic technique has been reported to be a less traumatic alternative to several conventional nerve blocks and local infiltration for anesthesia of the maxillary teeth, their periodontium, and the palate. However, its anatomic basis remains controversial. The present study aimed to determine if the pattern of cortical and cancellous bone density in the maxillary premolar region can provide a rationale for the success of the AMSA anesthetic technique. Method: Cone-beam computed tomography scans of 66 maxillary quadrants from 34 patients (16 men and 18 women) were evaluated using a volumetric imaging software for cortical and cancellous bone densities in three interdental regions between the canine and first molar. Bone density was measured in Hounsfield units (HU) separately for the buccal cortical, palatal cortical, buccal cancellous, and palatal cancellous bones. Mean HU values were compared using the Mann-Whitney U test and one-way ANOVA with post-hoc analysis. Results: Cancellous bone density was significantly lower (P ≤ 0.001) in the palatal half than in the buccal half across all three interdental regions. However, there was no significant difference (P = 0.106) between the buccal and palatal cortical bone densities at the site of AMSA injection. No significant difference was observed between the two genders for any of the evaluated parameters. Conclusions: The palatal half of the cancellous bone had a significantly lower density than the buccal half, which could be a reason for the effective diffusion of the anesthetic solution following a palatal injection during the AMSA anesthetic technique.