• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.1
• /
• pp.37-42
• /
• 2006

Matrix metalloproteinase-9 (MMP-9) is considered to be an important component in the progression of inflammation. Monocytes/macrophages are prominent at inflammation sites, and activation of these cells by stimulants such as lipopolysaccharide (LPS) leads to the production of significant amounts of MMP-9. Here, we show that LPS-induced MMP-9 production and activation was inhibited by the water extract from the fruit of Chaenomeles sinensis (CS), the root of Polygonum cuspidatum (PC), but increased by the extract from Boswellia carterii (BC). To investigate the mechanism by which those extracts inhibits MMP-9 activation, we examined the level of MMP-9 mRNA expression. We observed a significant change in the MMP-9 expression between LPS alone and LPS plus Chaenomeles sinensis and Polygonum cuspidatum extracts-treated cells. In addition, LPS significantly up-regulated MMP-9 promoter activity in Raw 264.7 cells, which was attenuated by the CS and PS extracts. However, water extracts from Boswellia carterii increased MMP-9 expression and MMP-9 promoter activity which were induced by LPS treatment in Raw 264.7 cells. These data suggest that water extracts from Chaenomeles sinensis and Polygonum cuspidatum can modulate anti-inflammatory immune response, which may be in part associated with the regulation of MMP-9 production and/or activation through the regulation of MMP-9 expression in mouse macrophage cells.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.121-127
• /
• 2013

With the continuing demand for lightweight bicycles, carbon fiber composite materials have been widely used in manufacturing bicycle frames and components. Unlike general isotropic materials, the structural characteristics of composite materials are strongly influenced by the staking directions and sequences of composite laminates. Thus, to verify the design process of bicycles manufactured using composites, structural analysis is considered essential. In this study, a carbon-fiber-reinforced plastic (CFRP) bicycle frame was designed and its structural behavior was investigated using finite element analysis (FEA). By measuring the failure indices of the fiber and matrix under various stacking sequences and loading conditions, the effect of the stacking condition of composite laminates on the strength of the bicycle structure was examined. In addition, the structural safety of the bicycle frame can be enhanced by reinforcing weak regions prone to failure using additional composite laminates.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.556-562
• /
• 1999

The increasing price of surimi has affected the economical benefits of surimi based food industry, To maintain gel strength in low grade surimi, the optimum formulation adding functional proteins to low grade surimi is required. The objective of this study was to develop the optimum formulation of ingredients in making gels in low grade surimi on the addition of functional non-muscle proteins to low grade surmi by measuring rheological properties of the gels. The rheological qualities of the cooked gels made with A and RA grade surimi on the effects of adding five kinds of starches (potato, wheat, waxy maize, corn and modified corn) and four kinds of functional proteins (bovine plasma protein, dehydrated egg white, soy protein isolate and whey protein concentrate) to the gels were evaluated, The gel styengths at cooking with A and RA grade surimi were decreased with increasing the added starches. The kind of starches added affected little the gel strengths in Rh grade surimi, while potato and corn starches decreased at the least in gel strengths of the gel made with A grade surimi with increasing the concentration of starches. The bovine plasma protein (BPP) significantly increased the gel strength, especially in RA grade surimi, but BPP decreased the whiteness of the gel. Therefore, the optimum content of BPP was up to $2\%$ because of the whiteness of the gels in RA grade surimi, The optimum formulation for the gel with RA grade surimi to satisfy the gel strength of 1000$\times$g and $78\%$ moisture was $40.9\%$ surimi, $9.1\%$ dehydrated egg white (DEW) and $0.9\%$ starch, while that with A grade surimi under the same condition was $37.9\%$ surimi, $6.6\%$ DEW and $3,4\%$ starch.

• Journal of Radiation Industry
• /
• v.5 no.2
• /
• pp.159-164
• /
• 2011

A variety of natural polymers have been used as tissue engineering scaffolds, drug delivery system, and cosmetic materials due to their higher biocompatibility and water uptake. As a major component of extracellular matrix, hyaluronic acid consisting of D-glucuronic acid and N-acetylglucosamine has been popularly used as a hydrogel material. Even though it has good properties to be used in the tissue engineering and cosmetic industry, its higher viscosity has limited a potential use in a variety of applications; only low content should be applied in preparing above products. In the present study, we investigated the effect of electron beam irradiation on the properties of hyaluronic acid. Hyaluronic acid paste containing low contents of water changed to solution after electron beam irradiation ranging from 1 to 10 kGy, which didn't exhibit any alteration of surface properties and morphological change after freeze-drying. However, its viscosity was significantly decreased as absorbed dose increased, which was approximately one by hundred in comparison with the viscosity of original hyaluronic acid solution with same concentration. In addition, it can still interact with positive charged chitosan generating polyelectrolyte complex. Therefore, only viscosity was decreased after electron beam irradiation, whereas other properties of hyaluronic acid maintained. Consequently, these hyaluronic acids with lower viscosities can be used in a variety of applications in tissue engineering, drug delivery, and cosmetic industry.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.41 no.1
• /
• pp.35-43
• /
• 2015

Morinda officinalis (Rubiaceae) is a medicinal herb that has traditionally been used for the treatment of skin inflammation. The present study was to investigate the inhibitory efficacy of matrix metalloproteinases-1 (MMP-1) of the extracts of the root of M. officinalis, which was autoclaved at $132^{\circ}C$ and $1.2kgf/cm^2$ for 15 min using an autoclave. The composition of the extracts were compared with that prepared without autoclaved treatment. Total phenol and flavonoid contents were analyzed for the autoclaved M. officinalis root extract (AME) and M. officinalis root extract (ME). Results showed that the autoclaved AME contained total phenol and flavonoid contents 1.5-fold times more than those from ME. AME showed DPPH and superoxide radical scavenging activities as 79.25% and 94.5%, respectively, at the concentration of $500{\mu}g/mL$. In anti-inflammatory assay, AME inhibited the activity of COX-2 and 5-LOX metabolites. In addition, AME showed higher an inhibition rate in MMP-1 expression than ME in UVA-irradiated human dermal fibroblast (HDF) without any significant cytotoxicity. UVB-induced cytotoxicity and cell death were effectively suppressed by AME. In conclusion, autoclaving the M. officinalis root increased the phenol and flavonoid contents. The extracts of the autoclaved M. officinalis enhanced the antioxidant, anti-inflammatory and anti-MMP-1 effects. Thus, the extracts could be an useful active ingredient in cosmetics.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.4
• /
• pp.63-72
• /
• 2012

The main objective of this study is to assess the compatibility between Korean ministry of environment (KME) standard and ISO (KS I ISO) standard for the determination of BTEX and TPH content in soil. We carried out comparison analysis for both methods using CRM and matrix spiked samples. In case of GC-MS analysis for BTEX, we got statistically (significance level: 0.05) the same results from KME standard (ES 07600.1) and ISO standard (KS I ISO 15009). However, it showed statistically (significance level: 0.05) different results when TPH was analyzed by KME standard (ES 07552.1) and ISO standard (KS I ISO 16703). To clarify the reason why both methods produced different results for TPH content, we also did some additional experiments in terms of differences in extraction, clean-up and target hydrocarbon range. Extraction with polar and non-polar compounds mixed solvent (acetone+n-heptane) of KS I ISO 16703 showed higher extraction efficiency than with only non polar solvent (dichloromethane) extraction of ES 07552.1 by about 9%. While column type clean-up of KS I ISO 16703 showed the reduction in TPH content between before and after clean-up, batch type of clean-up of ES 07552.1 did not show any changes in TPH content through clean-up process. The target hydrocarbon range of ES 07552.1 and KS I ISO 16703 is $C_8{\sim}C_{40}$ and $C_{10}{\sim}C_{40}$, respectively. From this point of view, kerosene and JP-8 contaminated soil showed higher RPD (relative producibility deviation) values between results by both method than that of lubricant or diesel contaminated soil. The higher content of hydrocarbon ($C_8{\sim}C_{10}$) in kerosene and JP-8 played an important role in increasing RPD values in addition to the effects caused by different solvents and clean-up method. Consequently, it was concluded that both methods (ES 07552.1 and KS I ISO 16703) were not compatible.

• Journal of Korea Foundry Society
• /
• v.41 no.5
• /
• pp.411-418
• /
• 2021

In order to experimentally investigate the effect of Ni or Cu addition on microstructure and mechanical properties of high Si Solution Strengthened Ferritic Ductile cast Iron (SSF DI), a series of lab-scale sand casting experiment were conducted by changing initial concentration of Ni up to 3.0wt% or Cu up to 0.9wt% in the alloy. It was found that increase in Ni or Cu content in the alloy leads to increase in strength properties and hardness as well as decrease in ductility. The higher Ni or Cu content the SSF DI has, the higher fraction of pearlite was observed. At similar levels of Ni or Cu contents in the alloy, higher pearlite area fraction was observed in the Cu-containing SSF DI than that in the Ni-containing SSF DI. When the effect of the microstructure on the mechanical properties of Ni-containing SSF DI was considered, Ni-containing SSF DI was found to have excellent strength and hardness as well as good elongation when the pearlite fraction was controlled less than 10%. As the pearlite fraction in the Ni-containing SSF DI exceeds 10%, however, it shows drastic decrease in elongation. Meanwhile, gradual increase in strength and hardness, and decrease in elongation with respect to increase in pearlite fraction were observed in Cu-containing SSF DI. The different microstructure-mechanical property relationships between Ni-containing and Cu-containing SSF DI were due to the combined effect of the relatively weak pearlite stabilizing effect of Ni compared to that of Cu in high Si SSF DI, and matrix strengthening effect caused by the different amounts of those alloying elements required for similar pearlite fraction.

• Animal Bioscience
• /
• v.34 no.6
• /
• pp.957-966
• /
• 2021

Objective: Ovarian follicular development, which dependent on the proliferation and differentiation of granulosa cells (GCs), is a complex biological process in which miRNA plays an important role. Our previous study showed that miR-458b-5p is associated with ovarian follicular development in chicken. The detailed function and molecular mechanism of miR-458b-5p in GCs is unclear. Methods: The luciferase reporter assay was used to verify the targeting relationship between miR-458b-5p and catenin beta-1 (CTNNB1), which is an important transcriptional regulatory factor of the Wnt/β-catenin pathway. The cell counting kit-8 (CCK-8) assay, flow cytometry with propidium iodide (PI) and annexin V-fluorescein isothiocyanate (FITC) labeling were applied to explore the effect of miR-458b-5p on proliferation, cell cycle and apoptosis of chicken GCs. Quantitative real-time polymerase chain reaction and Western blot were used to detect the mRNA and protein expression levels. Results: We demonstrated that the expression of miR-458b-5p and CTNNB1 showed the opposite relationship in GCs and theca cells of hierarchical follicles. The luciferase reporter assay confirmed that CTNNB1 is the direct target of miR-458b-5p. Using CCK-8 assay and flow cytometry with PI and Annexin V-FITC labeling, we observed that transfection with the miR-458b-5p mimics significantly reduced proliferation and has no effects on apoptosis of chicken GCs. In addition, miR-458b-5p decreased the mRNA and protein expression of CD44 molecule and matrix metallopeptidase 7, which are the downstream effectors of CTNNB1 in Wnt/β-Catenin pathway and play functional roles in cell proliferation. Conclusion: Taken together, the data indicate that miR-458b-5p regulates ovarian GCs proliferation through Wnt/β-catenin signaling pathway by targeting CTNNB1, suggesting that miR-458b-5p and its target gene CTNNB1 may potentially play a role in chicken ovarian follicular development.

• Composites Research
• /
• v.32 no.2
• /
• pp.96-101
• /
• 2019

Interfacial adhesion between fiber and resin are related to composites performance, so it is very important to evaluate them accurately. In this study, the interfacial properties of microdroplets under fatigue loading conditions were evaluated. The mechanical properties and interfacial adhesion of epoxy resin with dopamine were studied. Tensile specimens were prepared to evaluate mechanical properties and epoxy microdroplets specimens were used for the evaluation of interfacial adhesion. In addition, in the microdroplet fatigue test, the same diameter of the microdroplet was used and the experiment was performed under the same conditions. As a result, it was confirmed that mechanical and interfacial properties were improved when dopamine was applied to epoxy resin through tensile and microdroplet experiments. It is considered that dopamine improves the degree of curing of the epoxy resin and imparts hydroxyl groups to the epoxy resin to increase the mechanical properties and the interfacial adhesion between the glass fibers.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.44 no.4
• /
• pp.389-397
• /
• 2018

The starfish, Asterina pectinifera Muller and Troschel (Asterinidae) is an indigenous species commonly found in all coasts of Korea causes damages to shellfish farms. In order to exterminate A. pectinifera, they are dried and used as fertilizer. Although various studies have been conducted to create high added value from the retrieved A. pectinifera, their actual utilization is relatively low. Accordingly, this study aimed to find new practical uses of starfish by identifying useful ingredients for skin anti-aging. Two polyhydroxysteroids and one asterosaponin were isolated from the A. pectinifera. The structures of these compounds were identified as $5{\alpha}$-cholestane-$3{\beta},6{\alpha},7{\alpha},8,15{\alpha},16{\beta},26$-heptol, $5{\alpha}$-cholestane-$3{\beta},4{\beta},6{\alpha},7{\alpha},8,15{\beta},16{\beta},2$6-octol, and asterosaponin $P_1$ on the basis of chemical and spectroscopic analysis. Among these compounds, we have found that asterosaponin $P_1$ increased epidermal stem cell proliferation and the expression of hyaluronan synthase-2 and hyaluronan synthase-3 gene, which are enzymes that synthesize water-binding matrix hyaluronic acids in keratinocytes. In addition, asterosaponin $P_1$ increased synthesis of pro-collagen type I, a major dermal collagen in fibroblasts. As a result, asterosaponin $P_1$ isolated from A. pectinifera could be used as a useful cosmetic ingredient that improves skin symptoms accompanying skin aging.