• 펄프종이기술
• /
• 제48권1호
• /
• pp.93-99
• /
• 2016

The extraction efficiency depending on the extracting methods and the conditions of extraction was investigated. The common steam extraction was compared to the distillation extraction method. The effects of the samples size and the extraction time on the extract yield were also investigated by using UV-Vis spectrophotometer. One of the functional components of pine needle extract as the natural phenol base components were detected by the UV-VIS at around 235 nm wavelength range. The absorbance intensity at around 235 nm wavelength of the pine needle extract was used as the indicator of the extraction efficiency in this experiment. The distillation extraction showed the higher extract yield than the steam extraction. The grinding treatment of pine needles also resulted in the better extract performance, but the severe grinding showed a little decrease in the extract yield especially in case of the distillation extraction method. More than half of the extract was collected at the first stage of the extraction, that was the first 15 minutes in the total 60 minutes extraction.

• 마이크로전자및패키징학회지
• /
• 제22권4호
• /
• pp.1-5
• /
• 2015

In high temperature aircraft electronics, aluminium based brazing filler is the prime choice today. Aluminium and its alloys have compatible properties like weight minimization, thermal conductivity, heat dissipation, high temperature precipitation hardening etc. suitable for the aerospace industry. However, the selection of brazing filler for high temperature electronics requires high temperature joint strength properties which is crucial for the aerospace. Thus the selection of proper brazing alloy material, the composition and brazing method play an important role in deciding the final reliability of aircraft electronic components. The composition of these aluminium alloys dependent on the addition of the various elements in the aluminium matrix. The complex shapes of aluminium structures like enclosures, heat dissipaters, chassis for electronic circuitry, in avionics are designed from numerous individual components and joined thereafter. In various aircraft applications, the poor strength caused by the casting and shrinkage defects is undesirable. In this report the effect of various additional elements on Al based alloys and brazing fillers have been discussed.

• 한국분말재료학회지
• /
• 제27권2호
• /
• pp.111-118
• /
• 2020

The convergence of artificial intelligence with smart factories or smart mechanical systems has been actively studied to maximize the efficiency and safety. Despite the high improvement of artificial neural networks, their application in the manufacturing industry has been difficult due to limitations in obtaining meaningful data from factories or mechanical systems. Accordingly, there have been active studies on manufacturing components with sensor integration allowing them to generate important data from themselves. Additive manufacturing enables the fabrication of a net shaped product with various materials including plastic, metal, or ceramic parts. With the principle of layer-by-layer adhesion of material, there has been active research to utilize this multi-step manufacturing process, such as changing the material at a certain step of adhesion or adding sensor components in the middle of the additive manufacturing process. Particularly for smart parts manufacturing, researchers have attempted to embed sensors or integrated circuit boards within a three-dimensional component during the additive manufacturing process. While most of the sensor embedding additive manufacturing was based on polymer material, there have also been studies on sensor integration within metal or ceramic materials. This study reviews the additive manufacturing technology for sensor integration into plastic, ceramic, and metal materials.

• 복식문화연구
• /
• 제27권5호
• /
• pp.415-432
• /
• 2019

The purpose of the present study was to generate a list of business ethics components according to business area for small and medium-sized fashion companies. Based on the literature review, 21 components of business ethics components were identified within five business areas. Ten CEOs(Chief Executive Officers) each participated in an in-depth interview, sharing ethical and unethical cases from their own businesses. Constant comparative analysis was used to generate important business ethics components from those cases. In results, important business ethics components for each business area are: 1) using human-friendly materials, strengthening sustainable technologies, using vegan materials, concerning safe process, and reducing waste in the material production and sourcing area, 2) enhancing an efficiency in design, developing recycle/reuse designs, avoiding to copy designs, and using messages for public interest in the product design area, 3) concerning fair-trade, reducing harmful substance, saving energy, and using ethical supply channels in the distribution and logistics area, 4) acquiring certifications, promoting consumer protection, avoiding exaggerative/false advertisements, and promoting social contributions in the management and marketing area, and 5) promoting workers' rights, complying with the law, and investing on employee educations in the labor management area. All of the ethical and unethical cases of the ten companies have involved aspects of the 21 components, thereby enhancing understandings on how each issue is being seriously considered and/or handled in the small and medium-sized fashion companies. Study findings may provide a basis for development of a research model for quantitative studies and/or educational programs related to business ethics in the fashion industry.

• Composites Research
• /
• 제37권2호
• /
• pp.115-125
• /
• 2024

환경에 대한 범세계적인 문제와 관심이 고조되는 가운데 자동차 산업에서도 친환경 소재로의 전환이 가속화되고 있다. 자동차 산업에서 친환경 복합재료는 차량 내부 및 비 구조 부품에 주로 사용된다. 특히 천연섬유 복합재료는 차량의 경량화로 연료 소비와 온실가스 배출을 줄이는데 도움을 주며 재활용이 가능하고 우수한 열적 특성과 내구성을 가지고 있어 자동차 내장 부품에 적합하다. 아울러 생산 비용 절감과 지속 가능성은 천연섬유 복합재료의 주요 장점이다. 친환경 복합재료 시장은 2022년부터 2030년까지 연평균 성장률 15.3%로 864억 3천만 달러 규모로 성장할 것으로 기대되며, 천연섬유 복합재료 시장은 2023년부터 2028년까지 연평균 5.3% 성장해 4억 2,400만 달러에 이를 것으로 예상된다. 본 리뷰 논문에서는 천연섬유 복합재료를 중심으로 차세대 자동차용 친환경 복합재료의 연구 동향과 실제 자동차 산업에서의 적용에 대해 탐구한다.

• Composites Research
• /
• 제37권3호
• /
• pp.226-231
• /
• 2024

석탄재는 건축 및 건설 산업에서 모래의 대체재로 사용되어 왔다. 그러나, 무연탄의 고갈에 따른 유연탄의 사용이나, 탈황공정에서 공기정화의 목적으로 사용된 생석회의 사용으로 인한 팽창성분의 혼입으로 인해 최근 석탄재를 혼입한 콘크리트에서 팝아웃 문제가 발생하고 있어 석탄재의 콘크리트 재활용을 심각하게 제한하고 있다. 본 연구에서는 석탄재 콘크리트 팝아웃 문제를 유발하는 성분을 특정하고, 이를 해결하기 위한 방안으로 팽창성분을 미리 완전히 팽창시키기 위한 전처리 방법을 제안하였다. 석탄재에 혼입된 산화칼슘을 완전히 팽창시킬 수 있는 10분씩 2회 처리하는 최적조건을 적용하여 콘크리트의 팝아웃 및 압축 강도 저하의 문제를 극복할 수 있었다. 본 연구에서 제안된 비용 및 시간 효율적인 수처리 방법은 석탄재의 콘크리트로의 재활용을 활성화 시킬 것으로 기대된다.

• Carbon letters
• /
• 제25권
• /
• pp.95-102
• /
• 2018

We examined the pressure effects on petroleum pitch synthesis by using open and closed reaction systems. The pressure effects that occur during the pitch synthesis were investigated in three pressure systems: a closed system of high pressure and two open systems under either an atmosphere or vacuum. A thermal reaction in the closed system led to the high product yield of a pitch by suppressing the release of light components in pyrolysis fuel oil. Atmospheric treatment mainly enhanced the polymerization degree of the pitch via condensation and a polymerization reaction. Vacuum treatment results in a softening point increase due to the removal of components with low molecular weights. To utilize such characteristic effects of system pressure during pitch preparations, we proposed a method for synthesizing cost-competitive pitch precursors for carbon materials. The first step is to increase product yield by using a closed system; the second step is to increase the degree of polymerization toward the desired molecular distribution, followed by the use of vacuum treatment to adjust softening points. Thus, we obtained an experimental quinoline insolubles-free pitch of product yield over 45% with softening points of approximately $130^{\circ}C$. The proposed method shows the possibility to prepare cost-competitive pitch precursors for carbon materials by enhancing product yield and other properties.

• 산경연구논집
• /
• 제12권3호
• /
• pp.21-29
• /
• 2021

Purpose: The cosmetic industry is one of the significant sectors of the economy that has attracted a wide range of players due to the fast growth rate. The purpose of this research is to identify the effect of container design in influencing consumer purchase intention, pulling together collected textual data regarding two factors. No other research conduct to measure this relationship. Research design, data and methodology: Using web data searching tools, the present researcher coded the data obtained. The web content analysis platform is useful because it allows a researcher to examine themes in texts and, in a way, allows an ideal way to understand links within categories of data. Results: Different components of container design have different impacts on the purchase behavior of different consumers. The most crucial container design components include; shape, color, material and textual, and artistic features. These components are used by designers for different purposes and have different levels of appeal to the consumer. Conclusions: Manufacturers in the cosmetic industry must invest in designing packaging products that are more appealing in shape and color while using high-quality materials to packaging these products. The packaging containers should also be designed to incorporate textual and artistic features that provide more information regarding the products.

• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.19-22
• /
• 2017

This paper describes the efficient equipment maintenance that can offer the exact time for repair and change of component in root industry. A conventional method offered the fixed time for repair and change of component because the method is based on early guarantee specification of the component. However the operating condition of manufacturing field is often under worse condition than early guarantee condition for high productivity. So, most components can't use until early guarantee time due to the operation of various different condition. Therefore we suggest the useful method for efficient equipment-maintenance by manufacturing-field analysis and feedback database. For this, the classification of root industry and related equipment is performed and then the detail classification of the process and component for equipment maintenance. And the monitoring module is also designed to gather data for feedback process and the environment is basically implemented for aging and reliability test.

• 한국산업융합학회 논문집
• /
• 제6권4호
• /
• pp.291-298
• /
• 2003

Interfacial crack problems between fiber and matrix in composite materials are discussed. A series of interfacial crack initiation and propagation experiments are conducted using the biaxial loading device for various mode-mixes. Normal crack opening displacement (NCOD) is measured near crack front by a crack opening interferometry and used for extracting fracture parameters. From mixed mode interfacial crack initiation experiments, large increase in toughness with shear components is observed. Initial velocity of crack propagation is very dependent upon the mode-mixes. It increased with positive mode-mix due to the increase of stress singularities ahead of crack front and decreased with negative mode-mix resulting from the increase of the degree of compressive stress behind the crack front. Crack propagation was less accelerated with positive mode-mix than the negative mode-mix.