• Journal of the Korean Society for information Management
• /
• v.40 no.3
• /
• pp.197-219
• /
• 2023

The cataloging rules of AACR families and bibliographic structure, which are broadly used in describing resources, show limitations in reflecting the unique bibliographic characteristics of Korean old materials. Thus this research proposed a bibliographic structure optimized to the unique bibliographic characteristics of Korean old materials by establishing bibliographic relationships between bibliographic entities based on the FRBR LRM conceptual model. The bibliographic relationships should be established in the way of connecting related materials in the bibliographic structure. These relationships should sufficiently reflect the bibliographic characteristics of the materials, physical variations, and content variations. Through this structure, the bibliographic description can be separated and integrated into the bibliograhpic unit by applying LRM conceptual model. By using the proposed structure, the organization, management, and utilization of Korean old materials can be more efficient. Also, it can provide a new bibliographic environment that can be the foundation of creating BIBFRAME records for Korean old materials.

• Safety and Health at Work
• /
• v.15 no.1
• /
• pp.33-41
• /
• 2024

Background: Dust generated during the processing of building materials enterprises can pose a serious health risk. The study aimed to compare and analyze the results of ART and the Monte Carlo model for the dust exposure assessment in building materials enterprises, to derive the application scope of the two models. Methods: First, ART and the Monte Carlo model were used to assess the exposure to dust in each of the 15 building materials enterprises. Then, a comparative analysis of the exposure assessment results was conducted. Finally, the model factors were analyzed using correlation analysis and the scope of application of the models was determined. Results: The results show that ART is mainly influenced by four factors, namely, localized controls, segregation, dispersion, surface contamination, and fugitive emissions, and applies to scenarios where the workplace information of the building materials enterprises is specific and the average dust concentration is greater than or equal to 1.5 mg/m³. The Monte Carlo model is mainly influenced by the dust concentration in the workplace of building materials enterprises and is suitable for scenarios where the dust concentration in the workplace of the building materials enterprises is relatively uniform and the average dust concentration is less than or equal to 6mg/m³. Conclusion: ART is most accurate when workplace information is specific and average dust concentration is > 1.5 mg/m³; whereas, The Monte Carlo model is the best when dust concentration is homogeneous and average dust concentration is < 6 mg/m³.

• Health Policy and Management
• /
• v.30 no.3
• /
• pp.409-417
• /
• 2020

Background: It is well known that the distribution of therapeutic materials is very complex. However, it is not easy to demonstrate the concrete problems caused by distribution channels empirically. The purpose of this study was to investigate the differences in the price of therapeutic materials according to the type of purchasing agency and the way in which medical institutions purchase therapeutic materials. Methods: This study compared the claimed prices and the maximum allowable prices for the items of therapeutic material used for general spinal surgery. Results: Ilsan Hospital, which purchased directly without a purchasing agent, had the lowest claimed prices, followed by a large professional purchasing agency, a foundation-related purchasing agency, and a general purchasing agency. In addition, the difference between the claimed prices and the maximum allowable prices according to the purchase type was larger in the expensive treatment materials, and in the case of the lower price treatment materials, it tended to converge to the maximum allowable prices. Conclusion: National health insurance spending for therapeutic materials are to be affected by the distribution channels of them. We proposed several ideas to rationalize the expenditure such as classification of therapeutic materials on the basis of price or other criteria.

• Korean Journal of Hazardous Materials
• /
• v.6 no.2
• /
• pp.68-76
• /
• 2018

This study aims to provide a methodological framework to estimate the travel demand of hazardous materials transporting vehicles by link and analyze daily traffic patterns on an expressway to develop safety roadway management strategies. Traffic volume of hazardous material vehicles is counted through the on-site investigation at twenty-five tollgates on the expressway, and their demands by a link are predicted through origin-destination flows estimation. The result shows that the number of the domestic hazardous materials vehicles is approximately 51,207 vehicles per day and it indicates that hazardous materials transport vehicles account for 1.5% of total daily traffic on the internal expressway and 6.2% of total cargo traffic volumes. This study roughly estimated how many hazardous materials vehicles pass through the expressway segment. Thus it is expected to be utilized for establishing a systematic highway management strategy in the future by calculating the traffic volume of the hazardous material vehicles traveling on the interstate expressway.

• Nuclear Engineering and Technology
• /
• v.45 no.6
• /
• pp.803-810
• /
• 2013

The U.S. Department of Energy's Fuel Cycle Technologies R&D program under the Office of Nuclear Energy is working to advance technologies to enhance both the existing and future fuel cycles. One thrust area is in developing enabling technologies for next generation nuclear materials management under the Materials Protection, Accounting and Control Technologies (MPACT) Campaign where advanced instrumentation, analysis and assessment methods, and security approaches are being developed under a framework of Safeguards and Security by Design. An overview of the MPACT campaign's activities and recent accomplishments is presented along with future plans.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.05a
• /
• pp.303-307
• /
• 2004

Is not used by consistency transport at transport of freight nothing but is using Pallet only by pedestal when work palletized unit load or materials handling when keep simplicity receptacle which fill raw material or product in factory in our country. Therefore, pallet that is most important function of Pallet is not empled circulation to end consumer from manufacturing plant which is circulation process whole path being done and factory. It is real condition stopping only in extremely determinate part process use of warehouse back. Additionally, it is possible to figure out the flow of all the materials loaded on the RFID pallet; product, material, raw material immediately, so that epoch-making management is possible and it contributes to the reduction of logistics cost because there are little loss or outflow of pallet. The materials flow is getting speedy and inventory is decreasing in the logistics process, and also bad inventory and loss problems are prevented. As a result, not only logistics cost of company but also national logistics cost is decreased. Thus it contributes to the strength of national competitiveness.

• Journal of the Korea Safety Management & Science
• /
• v.11 no.1
• /
• pp.121-130
• /
• 2009

This paper considers a six sigma project for reducing the cost copper of the cable materials in a electric wire company. The project follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). A process map is used to identify process input variables. Three key process input variables are selected by using an input variables are selected by using an input variable evaluation table: large cable, plating, and a twisted pair. DOE is utilized for finding the optimal process conditions of the three key process input variables. The implementing result of this six sigma project is enable for reducing of the 2.8% copper materials.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.406-411
• /
• 2004

BOM(Bill of Materials) is a listing or description of raw materials, parts, and assemblies that define a product. In order to evaluate the performance of proposed BOM management system, which is very important to maintenance information system of urban transit. We develop component based BOM data and rule-set to design data structure that is mutually independent and integrated efficiently. It divides data whit management interface using component technology. The component based master BOM have advantage in database size and flexibility. Flexibility is measured as the number of updating records in accordance with added new product or engineering change. In database size, component based BOM is the best. we develop master BOM management system in web environment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.221-222
• /
• 2021

Conventionally, in material management at a construction site, the type, size, and quantity of materials are identified by the eyes of the worker. Labor-intensive material management by manpower is slow, requires a lot of manpower, is prone to errors, and has limitations in that computerization of information on the identified types and quantities is additionally required. Therefore, a method that can quickly and accurately determine the type, size, and quantity of materials with a minimum number of workers is required to reduce labor costs at the construction site and improve work efficiency. In this study, we developed an automated convolution neural network(CNN) and computer vision technology-based rebar size and quantity estimation system that can quickly and accurately determine the type, size, and quantity of materials through images.

• Journal of Community Nutrition
• /
• v.4 no.2
• /
• pp.118-129
• /
• 2002

Nutrition is important in the management of diabetes mellitus, however, there are few little education materials specifically designed for older adults. The objective of this study was to develop nutrition education materials for prevention and management of diabetes moll for older adults. Materials developed were a booklet and four leaflets. The contents of materials were based on lesson plans. After several revisions of the draft of materials, illustrations and icons appropriate to the contents were designed using illustrator 9.0 and Photoshop 6.0. The booklet was composed of five chapters and 40 pages. The first chapter began with an introduction about diabetes and diabetes management by diet, exercise and medication. The second chapter dealt with ideal body weight, calculation of adequate caloric intake and food exchange list. The third chapter provided information for meal planning and sample menus. The fourth chapter focused on practical tips on nutritional care of diabetes, by providing tips on reducing sugars, fat and salt, and suggestions on eating for special occasions. The fifth chapter dealt with information in case of low blood sugars, exercise and foot care. The topics of the four leaflets were “Diabetes, what is it and care”, “Food exchange list and meal planning”, “Healthy eating for diabetes”, “Special care for diabetes low blood sugars, exercise and foot care” Each leaflet was composed of six sections and was printed in large paper (B4 size) for older adults. The draft of educational materials were re-viewed by four nutrition professionals and finally pilot-tested with ten adults aged 50 and older. The characteristics of the developed materials are as follows, i) messages are delivered using simple, specific information, ⅱ) messages focused on practical applicable tips, ⅲ) various pictures, illustrations and artwork were created and inserted to enhance understanding and interest, ⅳ) sections including risk factor assessment, calculation of ideal body weight and meal planning were designed to induce the user's participation, ⅴ) sample menus and food pictures were inserted in the booklet, vi) characteristics of older adults and transformed characteristics are diversely used to help the user feel familiarity. These materials are self-explanatory and can be used by older adults. These materials also can be used widely in nutrition education at public health centers or senior centers.