• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.502-507
• /
• 2003

The HANARO, multi-purpose research reactor, 30 MWth open-tank-in-pool type, is under normal operation since it reached the initial critical in February 1995. The HANARO is used for fuel performance tests, radio isotope productions, reactor material performance tests, silicone semiconductor productions and etc. Specially, the HANARO is planning to produce a fission moly-99 of radio isotopes, a mother nuclide of Tc-99m, a medical isotope and is under developing a target handling tool for loading and unloading those at a flow tube (OR-5). The target should be sufficiently cooled in the flow tube without an interference with the cooling of the others and an induction of extremely vibration. This topic is described an analectic analysis for the cooling characteristics of the fission moly-99 target to find the minimum cooling water. It was confirmed through the analysis results that the minimum cooling water, about 2.717 kg/s flew through the flow tube under the worst case that the guide tube got no perforating holes for cooling water to pass through the holes and that the target was safely cooled under about seventy percent (70%) of the maximum allowable temperature of the target.

• Restorative Dentistry and Endodontics
• /
• 제40권1호
• /
• pp.1-13
• /
• 2015

Advancements in bio-ceramic technology has revolutionised endodontic material science by enhancing the treatment outcome for patients. This class of dental materials conciliates excellent biocompatibility with high osseoconductivity that render them ideal for endodontic care. Few recently introduced bio-ceramic materials have shown considerable clinical success over their early generations in terms of good handling characteristics. Calcium enriched mixture (CEM) cement, Endosequence sealer, and root repair materials, Biodentine and BioAggregate are the new classes of bio-ceramic materials. The aim of this literature review is to present investigations regarding properties and applications of CEM cement in endodontics. A review of the existing literature was performed by using electronic and hand searching methods for CEM cement from January 2006 to December 2013. CEM cement has a different chemical composition from that of mineral trioxide aggregate (MTA) but has similar clinical applications. It combines the biocompatibility of MTA with more efficient characteristics, such as significantly shorter setting time, good handling characteristics, no staining of tooth and effective seal against bacterial leakage.

• 한국도로학회논문집
• /
• 제5권4호
• /
• pp.37-47
• /
• 2003

제주도 여러 도로현장에서 송이(화산쇄설물)는 빈번하게 접하는 토목재료이다. 송이는 일반적으로 파쇄성이 크고, 입자가 큰 재료로 알려져 있을 뿐, 이 화산쇄설물에 대한 연구가 미미하여 이 송이에 대한 처리방법에 많은 어려운 점이 따르고 있다. 본 연구에서는 제주도 각 지역에서 채취한 송이의 기본적인 강도특성에 관하여 연구하였다. 연구결과로 구한 송이의 강도특성 값은 추후 도로, 옹벽, 사면 등의 각종 설계 시 기본적인 자료로써 적용되어 질 수 있을 것이다.

• 대한산업공학회지
• /
• 제17권1호
• /
• pp.109-115
• /
• 1991

In automated manufacturing systems, Automated Guided Vehicle(AGV) Systems are increasingly important in material handling and manufacturing operations. A considerably flexible AGV system needs to be operated with maximum effectiveness. This paper develops an algorithm for the determination of the entering point and the number of AGVs required in the Flow Shop Type FMS. We consider an AGV used as a carrier and mobile workstation. For the limited number of AGV, the entering point of an AGV on a simple loop is determined in order to maximize the utilization of AGVs. For the unlimited number of AGVs, the number of AGVs required in the FMS is determined on the basis of the entering point of AGVs. The result by the algorithm may be used as a criterion on the control of material flow and the assignment of AGVs in the FMS. A numerical example is given to illustrate the algorithm.

• 대한산업공학회지
• /
• 제23권3호
• /
• pp.559-580
• /
• 1997

It is essential to construct on efficient material flow system for the successful introduction of automated manufacturing systems. Automated Guided Vehicle System(AGVS) ploys a significant role more and more in modern manufacturing environments, because of the flexibility and the precision they offer. However, as the size and the complexity of systems increase, the problems of dispatching, routing and scheduling of AGVs became complicated due to their independent and asynchronous demands. In this paper, we review relevant papers, and provide a new and more efficient method for partitioning the AGV system by introducing the concept of Central Path. This method named Central Path design has advantages, since each partitioned workstation group is served by one AGV and the material handling between groups is performed by special AGV that is used for the Central Path. Therefore the congestion problems never occur. Furthermore Central Path Design has a high flexibility for alteration and extension of system. Finally, we demonstrate its efficiency using simulation.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
• /
• pp.5-8
• /
• 2000

Vehicle travel time (empty travel time pius loaded travel time) is a key parameter for designing AGV-based material handling systems. Especially, the determination of empty vehicle travel time is difficult because of the stochastic nature of the empty vehicle locations. This paper presents a method to estimate vehicle travel times for AGV-based material transport systems. The model considers probabilistic aspects for the travel time and vehicle location under random vehicle selection rule and nearest vehicle selection rule. The estimation of empty travel time is of major effort. Simulation experiments are used to verify the proposed travel time model, and the simulation results show that the presented model provides reasonable travel time estimations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.741-744
• /
• 2001

This paper described on the fabrication of microstructures by DRIE(Deep Reactive Ion Etching). SOI(Si-on-insulator) electric devices with buried cavities are fabricated by SDB technology and electrochemical etch-stop. The cavity was fabricated the upper handling wafer by Si anisotropic etch technique. SDB process was performed to seal the fabricated cavity under vacuum condition at -760 mm Hg. In the SDB process, captured air and moisture inside of the cavities were removed by making channels towards outside. After annealing(1000$^{\circ}C$, 60 min.), the SDB SOI structure was thinned by electrochemical etch-stop. Finally, it was fabricated microstructures by DRIE as well as a accurate thickness control and a good flatness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.739-742
• /
• 2002

This paper described on the fabrication of microstructures by DRIE(deep reactive ion etching). SOI(Si-on-insulator) electric devices with buried cavities are fabricated by SDB technology and electrochemical etch-stop. The cavity was fabricated the upper handling wafer by Si anisotropic etch technique. SDB process was performed to seal the fabricated cavity under vacuum condition at -760 mmHg. In the SDB process, captured air and moisture inside of the cavities were removed by making channels towards outside. After annealing($1000^{\circ}C$, 60 min.), The SDB SOI structure was thinned by electrochemical etch-stop. Finally, it was fabricated microstructures by DRIE as well as an accurate thickness control and a good flatness.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.681-684
• /
• 2003

Piezoelectric motors have been successfully developed for various applications like autofocus drives in camera lenses and handling equipment for high-accuracy positioning. In this paper, the travelling-wave motor which used in the camera lense, using bending vibration of a ring was studied. The basic structure of the motor is same but we suggested a few parameters for considering their design. The parameter is different from sine and cosine region of the voltage of the ceramic surface, displacement according to the wave number difference, and the phase difference. Same size of ceramics and aluminium ring were used for the stator. As a result, the displacement is dependent on the wave number.

• 환경위생공학
• /
• 제19권2호
• /
• pp.30-36
• /
• 2004

Dry decontamination technique is required for maintaining nuclear material handling equipment contaminated with highly radioactive material in a hot cell. In order to determine the optimum blasting conditions of dry ice pellet blasting device, the basic experiments have been conducted on the simulated test specimens of four types of metals. The removal efficiency of test piece was evaluated by the XRF analysis and the change of the surface condition before and after blasting. The removal efficiency of cesium on loose contamination was 100% under blasting pressure; 3 kg/$cm^2$, blasting distance; 10 cm, blasting time: 10 sec. In case of fixed contamination, the removal efficiency of cesium was almost 96% under blasting pressure; 4kg/$cm^2$, blasting distance; 10 cm, blasting time; 30 sec.