• 한국화재소방학회논문지
• /
• 제23권2호
• /
• pp.62-66
• /
• 2009

본 연구는 국내에서 사용되고 있는 누전차단기 외함 절연재료의 소손 특성에 대하여 연구하였다. 시료는 3개 제조사의 누전차단기 외함 절연재료를 사용하였으며, 시료의 열분해특성, 연소특성, 트래킹 특성 등을 비교 분석하였다. 열분해특성은 TGA를 사용하였으며, 연소특성은 ISO5660(Fire Tests - Reaction to Fire, part 1)을 만족하는 Mass Loss Calorimeter(FTT 사)를 사용하였고, 트래킹 특성은 고체 절연재료의 내트래킹 및 비교트래킹 지수를 측정하는 실험인 KSC IEC 60112.의 기준에 따라 분석하였다. 연구결과 A제조사의 경우 내트래킹성이 가장 우수하였고, B제조사의 경우 내트래킹성이 가장 낮은 반면 $350^{\circ}C$ 이상의 고온에서 열안정성이 가장 우수하였으며, C제조사의 경우 $400^{\circ}C$ 이하의 온도에서 열안정성이 가장 우수한 것을 알 수 있었다.

• 소성∙가공
• /
• 제13권3호
• /
• pp.242-247
• /
• 2004

Literature review on reliability test method for developing high performance optical/thermofluidic components. Since the miniaturization by the conventional mechanical process is limited to milli-structure, i.e. $10^{-3}m$, new technology for fabricating of mechanical components is needed to match cost, reliability, and integrability criteria of micro-structure. Although numbers of various researches on MEMS/MOEMS devices and components, including material characterization, design and optimization, system validation, etc., the lack of standards and specifications make the researches and developments difficult. For that reason, this paper is intended to propose the methods of reliability test for measuring the mechanical property of optical/ thermofluidic components.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.218-221
• /
• 1999

Many researchers make efforts to develope an effective material with anti-tracking property. Specially, the porcelain type insulator is required exchanging to polymer insulator according to the environmental consideration. In this paper, we have developed the estimation system using the translated IEC-60587 test for the application of actual insulator. Those approach has been very successful applied to the various practical insulator.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.470-476
• /
• 2002

We tested the natural frequency for the 1st moving blades of a steam turbine in general power plants, carried out the modal test of the blade groups each natural frequency. By this test results, we identified the resonance results largely in damaging the blades. We can predict damage probability for the blade groups and change state of material property by using the result of this study.

• 한국해양공학회지
• /
• 제23권3호
• /
• pp.30-34
• /
• 2009

Oil hydraulic piston pumps are being extensively used in the world, because of simple design, light weight and effective cost etc. An oil hydraulic pump is likely to have serious problems of high leakage, friction and low energy efficiency according to large time use. In the oil hydraulic piston pumps the clearance between the valve block and piston plays an important role for volumetric and overall efficiency. In this paper, the wear property of the SACM645 material used the hydraulic piston pump has been work out by experimentation with variable heat treatment. To investigate the effect according to the piston surface condition, seven different types specimen were prepared. From the wear test results, induction hardening and nitration were definitely superior to the others. On the whole, nitration was estimated for high strength material to wear resistance.

• Current Photovoltaic Research
• /
• 제4권2호
• /
• pp.59-63
• /
• 2016

A key point of a soldering process for photovoltaic (PV) modules is to increase an adhesive strength leading a low resistivity between ribbon and cell. In this study, we intended to optimize a heating condition for the soldering process and characterize the soldered joint via physical and chemical analysis methods. For the purpose, the heating conditions were adjusted by IR lamp power, heating time and hot plate temperature for preheating a cell. Since then the peel test for the ribbon and cell was conducted, consequently the peel strength data shows that there is some optimum soldering condition. In here, we observed that the peel strength was modified by increasing the heating condition. Such a soldering property is affected by a various factors of which the soldered joint, flux and bus bar of the cell are changed on the heating condition. Therefore, we tried to reveal causes determining the soldering property through analyzing the soldered interface.

• 한국철도학회논문집
• /
• 제8권6호
• /
• pp.525-532
• /
• 2005

Fatigue life of catenary wires in various environments is reduced when stress is concentrated on some points, which are often found in corroded areas by surrounding pollutants. Therefore, the fatigue test were performed in order to investigate the effect of the surface corrosion on the destructive behavior in service environment and accelerated corrosion environment as well as th examine the corrosive property and mechanism of the catenary wires. In the fatigue test of the messenger stranded wire, the corrosion degraded materials showed 35~50% of fatigue life at a same stress amplitude compared to original material. Because the catenary wires have variable load by the interaction of periodic contacts with pantographs the maximum stresses of trolley wire and messenger wire calculated by simulation at the messenger wire during operation was estimated thought the corrosion behavior interpretation of variable stress and fatigue test.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.81-87
• /
• 2005

A fracture of hand held device, such as radio, TV and CD-RW drive, mainly occurs due to drop situation. For CD-RW drive, the need of high reading/writing speed in conjunction with low price accelerates the fracture of the device. Computer simulation can reduce the period of development and enhance impact characteristic of device. In this study, the detailed finite element model of CD-RW drive was developed to predict the damage under drop conditions. Material property for shock absorbing damper was obtained from tensile test of raw material. A MOONEY-RIVLIN type rubber in LS-DYNA was used as the material model of damper. To assess the reliability of the developed model, drop test at 200G-2msec and 150G-10msec condition was conducted and acceleration at pick-up was compared.

• 한국지반환경공학회 논문집
• /
• 제11권5호
• /
• pp.45-51
• /
• 2010

본 연구에서는 생석회 말뚝에 의한 연약지반 안정처리공법으로써의 현장 적용성을 평가하기 위하여 한국산 생석회에 대한 공학적 특성 규명은 물론 지중에서의 생석회에 의한 지반개량 원리 및 주변지반의 개량특성에 대한 이론적 고찰과 함께 실내모형시험을 수행하여 이를 바탕으로 실제 현장에서의 적용성과 활용성을 평가하고자 하였다. 실험결과 생석회 말뚝 공법은 생석회의 소화 흡수에 의한 탈수효과, 말뚝의 팽창에 의한 압밀효과 및 말뚝 자체의 강도에 의한 지지력 증가, 침하감소 효과 등의 개량효과를 얻을 수 있는 것으로 평가되었다. 생석회는 재료 특성이 매우 양호하여 그 자체로써 상당한 강도를 가지고 있으나 보다 큰 강도가 요구될 시에는 시멘트 등을 첨가하면 효과가 있을 것으로 판단된다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.769-775
• /
• 2008

The objective of this report is to determine the difference of thermal response that grouted two different materials, and compare the simulation result of the length of total ground heat exchanger length that using the ground thermal conductivity. And also to know heat exchange variation of ground heat exchanger temperature that measured with various test depth. The result shows that the test hole grouted with water permeable material got better thermal response than grouted with water impermeable material. However, with consideration of ingnore for the initial 12 hour data, the test hole grouted with impermeable material has larger thermal conductivity than the other. By former thermal conductivity, simulated data by engineering program shows only 3.4% difference or less. This result shows that ground thermal conductivity is not the main variables for the design program of ground heat exchanger. At the cooling or heating mode, base on the depth of -150m, the ground heat exchanger has best temperature at $-90{\sim}-60m$ and than getting worse because of entering water heat exchanged with leaving water in the same hole.