• Biotechnology and Bioprocess Engineering:BBE
• /
• 제6권2호
• /
• pp.75-88
• /
• 2001

In this paper, the microbial production of riboflavin is reviewed and includes descriptions of riboflavin overproducers, and the biosynthesis and details of the key-enzyme genes related to riboflavin. There kinds of riboflavin overproducers are known; Bacillus subtilis and Candida famate utilize glucose as a carbon source, but the fungus Ashbya gossypii requires plant oil as its sole carbon source. The starting material in ribofalvin biosynthesis is guanosine triphospate (GTP), which is converted to riboflavin through six enzymatic reactions. Though Bacillus subtilis, Candida famate, and Ashbya gossypii operate via different pathways until GTP, they follow the same pathway from GTP to riboflavin. From the metabolic viewpoint, with respect to improved riboflavin production, the supplementation of GTP, aprocess-limiting precursor must be considered. The GTP fluxes originate from three sources, serine, threonine and glyoxylate cycles. The development of pathways to strengthen GTP supplementation using biotechnological techniques remains an issue fro future research.

• Nuclear Engineering and Technology
• /
• 제55권6호
• /
• pp.2139-2146
• /
• 2023

During reactor operation, the divertor must withstand unprecedented simultaneous high heat fluxes and high-energy neutron irradiation. The extremely severe service environment of the divertor imposes a huge challenge to the bonding quality of divertor joints, i.e., the joints must withstand thermal, mechanical and neutron loads, as well as cyclic mode of operation. In this paper, potassium-doped tungsten (KW) is selected as the plasma facing material (PFM), oxygen-free copper (OFC) as the interlayer, oxide dispersion strengthened copper (ODS-Cu) alloy as the heat sink material, and reduced activation ferritic/martensitic (RAFM) steel as the structural material. In this study, a vacuum brazing technology is proposed and optimized to bond Cu and ODS-Cu alloy with the silver-free brazing material CuSnTi. The most appropriate brazing parameters are a brazing temperature of 940 ℃ and a holding time of 15 min. High-quality bonding interfaces have been successfully obtained by vacuum brazing technology, and the average shear strength of the as-obtained KW/Cu and ODS-Cu alloy joints is ~268 MPa. And a fabrication route for manufacturing the flat-type divertor target based on brazing technology is set. For evaluating the reliability of the fabrication technologies under the reactor relevant condition, the high heat flux test at 20 MW/m² for the as-manufactured flat-type KW/Cu/ODS-Cu/RAFM mockup is carried out by using the Electron-beam Material testing Scenario (EMS-60) with water cooling. This paper reports the improved vacuum brazing technology to connect Cu to ODS-Cu alloy and summarizes the production route, high heat flux (HHF) test, the pre and post non-destructive examination, and the surface results of the flat-type KW/Cu/ODS-Cu/RAFM mockup after the HHF test. The test results demonstrate that the mockup manufactured according to the fabrication route still have structural and interfacial integrity under cyclic high heat loads.

• 한국습지학회지
• /
• 제17권3호
• /
• pp.283-292
• /
• 2015

토양으로부터 방출되는 $CO_2$의 양은 전 지구적 지구 탄소 순환에서 가장 큰 방출 중 하나로 알려져 있다. 특히 토양 내 미생물의 유기물질 분해 과정에 의해 방출되는 이산화탄소의 양은 토양의 탄소 저장량을 장기적으로 결정하는 요인이 되므로 그 양을 정량화 하는 것이 필요하다. 본 연구는 토양에서 고라니의 분변이 $CO_2$ 배출에 미치는 영향을 파악하기 위해 수행하였다. 그리고 고라니의 분변이 토양의 $CO_2$ 배출에 주는 영향과 토지의 이용에 따라 변화하는 $CO_2$ flux를 정량화 하였다. 그 결과 고라니 분변 내 많은 유기물질은 토양 미생물의 활성화에 영향을 주고 그로 인해 토양의 호흡 및 토양 내 물리 화학적인 변화가 발생되어 토양의 유기물 함량이 서로 다르게 나타남을 확인할 수 있었다. 특히 4개 지역의 토양(경작지, 휴경지, 버드나무 군락, 갈대습지)의 C/N ratio와 $CO_2$ flux는 분변의 유무와 통계적으로 매우 유의미한 상관 관계를 나타냈으며(P<0.01), 분변의 영향을 받은 토양의 $CO_2$ flux는 분변의 영향을 받지 않은 토양보다 2-20배 더 높은 것으로 나타났다. 이 연구는 고라니의 분변이 토양에 주는 영향과 야생동물 분변을 이용한 토양 물질 순환 연구를 통해 육상 생태계 및 토양권의 물질 순환과 그 영향의 정도를 정량화 하였다는 점에서 큰 의의가 있는 연구이다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.5.2-5.2
• /
• 2009

From 10 years ago, the development of nano-devices endeavored to achieve reconstruction of information technology (IT) and nano technology (NT) industry. Among the many materials for the IT and NT industry, zinc oxide (ZnO) is a very promising candidate material for the research of nano-device development. Nano-structures of ZnO-based materials were grown easily via various methods and it attracts huge attention because of their superior electrical and optical properties for optoelectronic devices. Recently, among the various growth methods, MOCVD has attracted considerable attention because it is suitable process with benefits such as large area growth, vertical alignment, and accurate doping for nano-device fabrication. However, ZnO based nanowires grown by MOCVD process were had the principal problems of 1st interfacial layers between substrate and nanowire, 2nd a broad diameter (about 100 nm), and 3rd high density, and 4th critical evaporation temperature of Zinc precursors. In particular, the growth of high performance nanowire for high efficiency nano-devices must be formed at high temperature growth, but zinc precursors were evaporated at high temperature.These problems should be repaired for materialization of ultra high performance quantum devices with quantum effect. For this reason, we firstly proposed the growth method of vertical aligned slim MgZnO nanowires (< 10 nm) without interfacial layers using self-phase separation by introduced Mg at critical evaporation temperature of Zinc precursors ($500^{\circ}C$). Here, the self-phase separation was reported that MgO-rich and the ZnO-rich phases were spontaneously formed by additionally introduced Mg precursors. In the growth of nanowires, the nanowires were only grown on the wurzite single crystal seeds as ZnO-rich phases with relatively low Mg composition (~36 at %). In this study, we investigated the microstructural behaviors of self-phase separation with increasing the Mg fluxes in the growth of MZO NWs, in order to secure drastic control engineering of density,diameter, and shape of nanowires.

• 자원리싸이클링
• /
• 제16권3호
• /
• pp.27-33
• /
• 2007

구리, 주석 등의 유가금속을 다량 함유하고 있는 폐전기전자 스크랩으로부터 유가금속을 회수하는 것은 자원 재활용 측면에서 매우 중요하다. 본 연구에서는 폐동슬래그를 슬래그 형성제로 활용하여 폐전기전자 스크랩으로부터 유가금속을 추출하기 위한 새로운 공정이 제시되었다. 제안된 공정은 슬래그 형성제로 동 제련소에서 배출되는 폐동슬래그를 재활용한다는 장점이 있다. 각 실험에서는 일정한 비율로 혼합된 폐전기전자 스크랩과 폐동슬래그의 혼합시료를 보조 슬래그 형성제인 CaO와 함께 고온 용융되었다. 실험 결과 폐전기전자 스크랩에 함유된 구리와 주석이 Cu-Fe-Sn 합금상으로 각각 95% 이상, 85% 이상 추출되었다.

• Ocean and Polar Research
• /
• 제25권1호
• /
• pp.21-30
• /
• 2003

Seasonal fluctuations of physico-chemical and biological aspects of the environment were studied in Vladivostok harbour (Golden Horn Bay, the East Sea/Sea of Japan). The benthic community structure was described with a focus on size-spectra (bacteria, meio- and macrofauna) related with the chemical environment and chemical fluxes in sediment and to reveal their possible ecological role in the process of bioremediation of the environment. Samples from two sites with different concentrations of heavy metals (Fe, Zn, Cu, Pb, Mn, Cr, Ni Cd, Co) and petroleum hydrocarbon were assessed by a number of methods. These included plate counts of culturable bacteria, observation through a scanning electron (SEM) and transmission electron microscope (TEM). These approaches were complemented with microscopic assessments of the diversity of the benthic community. The specific communities had a limited number of species, tolerant to abnormally high levels of toxic compounds. The dominant species were presented by several sho.1-lived small polychaetes (Capitella capitata) and nematodes (Oncholaimium ramosum). The highest population density was recorded in microbenthos, in various diatoms, various physiological groups of bacteria which participate in biomineralization: marine heterotrophic bacteria, which oxidized oil, black oil in addition to groups resistant to heavy metals. They have the entire set of mechanisms for neutralizing the negative effect of those compounds, forming the detrital food web and biogeochemical circulation of material in sediments, which results in the biological self-recycling of sea basins. Macro- and meiobenthic organisms were more sensitive to a greater extent of $H_2S$ and petroleum hydrocarbons than to metal content, but the within-site rankings were the same as those achieved for microbiological analyses.

• 전자공학회논문지
• /
• 제50권1호
• /
• pp.254-260
• /
• 2013

본 논문에서는 IPMSM(Interior Permanent Magnet Synchronous Motor)의 약계자 제어에 따른 전자기적특성을 다룬다. IPMSM의 운전 속도 영역을 확장하기 위해 약계자 전류제어가 일반적으로 사용되며 약계자 운전 중에는 전기강판의 자기적 포화에 의해 쇄교자속의 왜형이 발생하게 된다. 따라서 정현파 전류 입력을 위한 전압 파형은 왜형을 갖게 된다. 약계자 전류 증가에 따라 이러한 전압 왜형은 더욱 크게 발생되며 기본파 전압에 비해 상당한 크기의 고조파 전압을 필요로 하게 된다. 이러한 현상을 ２차원 유한요소 해석을 이용하여 확인하였으며 시험을 통해 검증하였다. 본 연구 결과를 통해 IPMSM의 특성 분석에 사용되는 d-q축 등가회로 파라미터 즉, 영구자석에 의한 쇄교자속, d－q축 인덕턴스는 산정 단계에서 기본파 물리량으로 계산되므로 약계자 운전시 발생하는 전압 왜형을 예측할 수 없음을 알 수 있다. 결국 주어진 전압에서 얻을 수 있는 속도 예측에 오차를 수반하게 되며 전압고조파에 대한 대책이 필요하다.

• 공업화학
• /
• 제26권6호
• /
• pp.746-752
• /
• 2015

본 연구에서는 $Hg_2Cl_2-NO$의 물리적 승화법 공정에서의 확산-대류에 미치는 에스펙트 비율(길이/폭)의 영향에 대한 것이다. 원료물질 영역과 결정영역에서의 온도 차 20 K, 벽에서의 선형 온도분포를 가진 계에서, 대류의 영향 때문에, 총몰플럭스와 상호계면에서의 비균일성에 관하여서는, 에스펙트 비율이 2인 경우가 비율이 5인 경우보다 상당히 크다. 지상중력 하에서의 최고 총몰플럭스는 지상중력의 0.1 상태에 비하여 대략 2배 정도 크다. 에스펙트 비율을 2에서 5로 증가시켰을 때, 확산-대류형이 대류형으로 전이되며, 또한 확산의 강도도 확산-대류형의 강도를 지배하게 된다.

• 한국화재소방학회논문지
• /
• 제33권3호
• /
• pp.29-36
• /
• 2019

다층·다성분 난연성 케이블의 화재시뮬레이션에서 요구되는 연소물성이 콘 칼로리미터를 통해 측정되었다. 난연성 케이블의 주요 재질에 따른 CO 및 Soot yields 그리고 연소열이 검토되었다. 케이블의 난연성능이 우수한 TFR-8(고난연성 PCV 및 XLPE 첨가), TFR-CVV-SB(고난연성 PCV 및 일반 PVC로 구성) 및 VCTF가 각각 대상으로 고려되었다. 주요 결과로서, 난연성케이블인 TFR-8과 TFR-CVV-SB는 입사 복사열유속이 25 kW/㎡에서 50 kW/㎡으로 증가됨에 따라 CO yield(y_CO) 는 각각 23% 와 16% 증가한다. 반면에 VCTF의 CO yield는 복사 열유속의 변화에 큰 영향을 받지 않는다. 마지막으로 Soot yield 및 연소열은 시스의 재질(난연성능)이 강화될수록 복사 열유속에 의한 차이가 증가됨이 확인되었다. 따라서 다양한 열유속이 공존하는 화재환경에서 난연성 케이블의 연소물성의 적용에는 상당한 주의가 요구된다.

• 한국환경복원기술학회지
• /
• 제15권2호
• /
• pp.137-147
• /
• 2012

GRS is an effective urban ecology restoration technique that can manage a variety of environmental functions such as ecological restoration, rainwater spill control and island heat effect from a low-impact development standpoint that can be utilized in new construction and retrofits. Recently, quantitative evaluation studies, both domestic and abroad, in the areas related to these functions, including near-earth surface climate phenomenon, heavy rainwater regulation, thermal environment of buildings, have been actively underway, and there is a trend to standardize in the form of technological standards. In particular, centered on the advanced European countries, studies of standardizing the specific insulation capability of buildings with green system that comprehensively includes the green roof, from the perspective of replacing the exterior materials of existing buildings, are in progress. The limitation of related studies in the difficulties associated with deriving results that reflect material characteristics of continuously evolving systems due in part to not having sufficiently considered the main components of green system, mechanisms of vegetation, soils. This study attempts to derive, through EnergyPlus, the effects that the vegetation-related indicators such as vegetation height, FCV, etc. have on building energy load, by interpreting vegetation and soil mechanisms through plant canopy model and using an ecological standard indicator LAI that represent the condition of plant growth. Through this, the interpretations that assume green roof system as simple heat insulation will be complemented and a more practical building energy performance evaluation method that reflects numerical methods for heat fluxes phenomena that occur between ecology restoration systems comprised of plants and soil and the ambient space.